The Fast2test guarantees their customers that if they have prepared with Fortinet NSE6_FNC_AD-7.6 practice test, they can pass the Fortinet NSE6_FNC_AD-7.6 certification easily. If the applicants fail to do it, they can claim their payment back according to the terms and conditions. Many candidates have prepared from the actual Fortinet NSE6_FNC_AD-7.6 Practice Questions and rated them as the best to study for the examination and pass it in a single try with the best score.
| Section | Objectives |
|---|---|
| Topic 1: Concepts and Initial Configuration | - Model and organize infrastructure devices - Explain isolation networks and the configuration wizard |
| Topic 2: Deployment and Provisioning | - Configure access control on FortiNAC-F - Configure FortiNAC-F security policies - Configure and monitor high availability (HA) - Configure security automation |
| Topic 3: Integration | - Integrate with third-party devices using Syslog and SNMP traps - Configure and use FortiNAC-F Manager - Configure mobile device management (MDM) integration |
| Topic 4: Network Visibility and Monitoring | - Troubleshoot network devices and device status - Configure device profiling - Use logging options - Manage guests and contractors |
>> Reliable Fortinet NSE6_FNC_AD-7.6 Test Book <<
We are proud that our Fortinet NSE6_FNC_AD-7.6 exam preparation material is one of the best in the market. You should buy our Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) valid dumps and start preparation now because of some amazing offers. These offers are up to 1 year of Free NSE6_FNC_AD-7.6 Dumps updates, free demos of our NSE6_FNC_AD-7.6 exam product, and a full refund guarantee. What are you waiting for? Buy actual Fortinet NSE6_FNC_AD-7.6 now at discount and start your preparation.
NEW QUESTION # 75
Refer to the exhibit.
Which devices are automatically evaluated by these device profiling rules?
Answer: B
Explanation:
The correct answer is A . In FortiNAC-F, device profiling rules are used primarily to classify unknown or untrusted devices when they are first discovered. The study guide explains that when a device does not already exist in the database, FortiNAC-F adds it, treats it as a rogue, and evaluates it against enabled device profiling rules. It also states that devices are initially evaluated against device profiling rules only if they do not already exist in the database, because this avoids unnecessary repeated evaluation of known devices.
The exhibit also matters: the rules are enabled and set to Automatic registration, but Confirm Rule On Connect is not enabled and Confirm Rule Interval is set to None . That means FortiNAC-F will not automatically revalidate already-profiled or trusted devices every time they connect. Option B is wrong because trusted devices are not repeatedly evaluated unless rule confirmation is configured. Option C is too broad because all hosts are not processed through profiling rules on every connection. Option D is also wrong because changing location does not by itself force automatic device profiling; location can be used as a rule method, but the automatic evaluation described here applies when the rogue device is initially added to the database.
NEW QUESTION # 76
Which two statements are true about integrating a third-party device using SNMP traps from that device as input to generate an event? (Choose two.)
Answer: B,D
Explanation:
The correct answers are A and C . Fortinet's FortiNAC-F 7.6 documentation states that, to receive and interpret traps from devices or applications, those devices or applications must be modeled in FortiNAC and must have an associated IP address. That validates option A directly. The same Fortinet Trap MIB Files documentation also lists a FortiNAC-OS requirement: the snmp option must be included in the set allowaccess command. That validates option C .
Option B is wrong because Trap MIB integration is not limited to SNMPv3. Fortinet states that Trap MIB supports receiving SNMPv1 and SNMPv2 traps from external devices, while SNMPv3 is discussed separately for traps that populate host and user records.
Option D is the trap. The Fortinet documentation explicitly says IP address OID, MAC address OID, and user ID OID are not all required ; any one OID can be used to identify the host or user that triggered the trap. So the statement that both the IP address OID and MAC address OID must be configured is false.
NEW QUESTION # 77
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?
Answer: A
Explanation:
FortiNAC-F provides a robust engine for processing security notifications from third-party devices.
For standard integrations, such as FortiGate or Check Point, the system comes pre-loaded with templates to interpret incoming data. However, when an administrator needs FortiNAC-F to process syslog messages from a vendor or device that is not supported by default, they must configure a Security Event Parser.
The Security Event Parser acts as the translation layer. It uses regular expressions (Regex) or specific field mappings to identify key data points within a raw syslog string, such as the source IP address, the threat type, and the severity. Without a parser, FortiNAC-F may receive the syslog message but will be unable to "understand" its contents, meaning it cannot generate the necessary Security Event required to trigger automated responses. Once a parser is created, the system can extract the host's IP address from the message, resolve it to a MAC address via L3 polling, and then apply the appropriate security rules. This allows for the integration of any security appliance capable of sending RFC-compliant syslog messages.
"FortiNAC parses the information based on pre-defined security event parsers stored in FortiNAC's database... If the incoming message format is not recognized, a new Security Event Parser must be created to define how the system should extract data fields from the raw syslog message. This enables FortiNAC to generate a security event and take action based on the alarm configuration."
NEW QUESTION # 78
Which two requirements must be met to set up an N+1 HA cluster? (Choose two.)
Answer: B,C
Explanation:
The N+1 High Availability (HA) architecture was introduced in FortiNAC-F version 7.6 to provide a more scalable and flexible redundancy model compared to the traditional 1+1 active/passive setup.
In an N+1 configuration, a single secondary (standby) appliance can provide coverage for multiple primary (active) Control and Application (CA) appliances.
To set up an N+1 HA cluster, there are two fundamental structural requirements:
A FortiNAC-F Manager (FortiNAC-M): Unlike standard 1+1 HA, which can be configured directly between two CAs, N+1 management is centralized. The FortiNAC-M acts as the orchestrator that manages the failover groups, monitors the health of the primaries, and coordinates the promotion of the secondary server if a primary fails.
A FortiNAC-F device designated as a Secondary: The cluster must have one appliance explicitly configured with the Secondary failover role. This device remains in a standby state, receiving database replications from all N primaries in its group until it is called upon to take over the functions of a failed unit
NEW QUESTION # 79
When configuring isolation networks in the configuration wizard, why does a layer 3 network type allow for more than one DHCP scope for each isolation network type?
Answer: B
Explanation:
With a layer 3 isolation network type, FortiNAC-F supports multiple isolation networks of the same type, each with its own routed subnet. This design allows administrators to define more than one DHCP scope per isolation network type to accommodate multiple layer 3 isolation segments.
NEW QUESTION # 80
......
In order to let you have a deep understanding of our NSE6_FNC_AD-7.6 learning guide, our company designed the free demos for our customers. We will provide you with free demos of our study materials before you buy our products. If you want to know our NSE6_FNC_AD-7.6 training materials, you can download them from the web page of our company. If you use the free demos of our NSE6_FNC_AD-7.6 study engine, you will find that our products are very useful for you to pass your NSE6_FNC_AD-7.6 exam and get the certification.
NSE6_FNC_AD-7.6 Learning Mode: https://www.fast2test.com/NSE6_FNC_AD-7.6-premium-file.html