Our NSEI_OTS_AR-7.6 learning materials can be applied to different groups of people. Whether you are trying this exam for the first time or have experience, our learning materials are a good choice for you. Whether you are a student or an employee, our NSEI_OTS_AR-7.6 learning materials can meet your needs. This is due to the fact that our learning materials are very user-friendly and express complex information in easy-to-understand language. You do not need to worry about the complexity of learning materials. We assure you that once you choose our NSEI_OTS_AR-7.6 Learning Materials, your learning process is very easy.
| Section | Objectives |
|---|---|
| Network Access Control | - Configure network access authentication - Configure network segmentation schemas - Explain OT Ethernet concepts |
| Asset Management | - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC |
| Monitoring and Risk Assessment | - Analyze security reports from FortiAnalyzer - Create FortiAnalyzer event handlers - Perform risk assessment and management |
| Network Security | - Configure automation - Configure security inspections for industrial protocols - Configure virtual patching |
>> Exam Fortinet NSEI_OTS_AR-7.6 Study Guide <<
The DumpExam is one of the leading Fortinet NSEI_OTS_AR-7.6 exam preparation study material providers in the market. The DumpExam offers valid, updated, and real Fortinet NSE I - OT Security 7.6 Architect NSEI_OTS_AR-7.6 exam practice test questions that assist you in your NSEI_OTS_AR-7.6 Exam Preparation. The Fortinet NSEI_OTS_AR-7.6 exam questions are designed and verified by experienced and qualified Fortinet exam trainers.
NEW QUESTION # 21
In your OT environment, you want to detect the devices passively. Which two methods must you implement?
(Choose two answers)
Answer: A,B
Explanation:
The correct answers are C. Vendor OUI and D. Network traffic .
The study guide explicitly separates active/direct profiling methods from passive/non-direct methods and states that "In OT environments, passive methods are preferred over active methods." It then lists the methods that do not require FortiNAC to interact directly with the device being profiled. Among those methods are "Network traffic: gathered from the infrastructure" and "Vendor OUI: determined by the MAC address gathered from the infrastructure." That directly matches options C and D .
Options A and B are incorrect because SSH and SNMP are shown in the guide under the direct/active profiling methods. The guide's point is that passive detection avoids directly scanning or interacting with OT endpoints, since that can negatively affect performance in industrial environments. Because the question specifically asks for passive detection methods, the correct pair is Vendor OUI and Network traffic .
NEW QUESTION # 22
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. FortiGate queries FortiGuard servers . The study guide explains the device detection process very clearly: "First, FortiGate attempts to detect the devices based on the information in the local device database (CIDB). If FortiGate cannot detect the devices locally, it queries the FortiGuard servers by sending data about the unknown devices to the FortiGuard servers. In response, the FortiGuard servers provide additional information about those devices." This directly answers the question and shows that querying FortiGuard is the next step after local detection fails.
Option D is incorrect because the guide says FortiGate checks the local device database (CIDB) first, before this next step. Option B refers more to FortiNAC-style profiling logic, not FortiGate's OT device detection flow. Option C is also incorrect because service connectors are not described here as the immediate follow-up step for unknown local device detection. The study guide specifically identifies FortiGuard servers as the next destination for device identification assistance.
NEW QUESTION # 23
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: C
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 24
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
NEW QUESTION # 25
Refer to the exhibits.
The Playbook Monitor dashboard and the analysis of the corresponding incident analysis are shown. You created the playbook with the objective of automatically attaching the report to the incident that was created.
Which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are C and D .
Option D is correct because the Playbook Monitor clearly shows the starter as On_Demand and the trigger as user(admin) . The study guide states that "ON_DEMAND: The playbook runs when an administrator manually starts it" and also notes that to run it manually, you select the playbook and click Run . This exactly matches the exhibit, so the playbook was manually triggered.
Option C is also correct. The study guide explains that "tasks run one after another" and that "if needed, the output of one task can be used by the tasks that follow it." It also gives an example where workflow logic matters, such as creating an incident and then attaching details to it. In the exhibit, the sequence shown is Attach_report , then Run_report , then Create_Incident , while the incident analysis shows no report attached . Since the report must exist and the incident must already be available before it can be attached properly, the task order is wrong and must be reordered.
Option B is incorrect because the monitor shows multiple tasks completed successfully, not only Create_Incident . Option A is not the best answer because the main problem demonstrated by the exhibits is not simply waiting time, but the incorrect workflow order. The playbook completed successfully, yet the report is still not attached, which indicates a design issue in the task sequence rather than just a delay.
NEW QUESTION # 26
......
Tens of thousands of our worthy customers have been benefited by our NSEI_OTS_AR-7.6 exam questions. Of course, your gain is definitely not just a NSEI_OTS_AR-7.6 certificate. Our NSEI_OTS_AR-7.6 study materials will change your working style and lifestyle. You will work more efficiently than others. Our NSEI_OTS_AR-7.6 Training Materials can play such a big role. What advantages does it have? You can spend a few minutes free downloading our demos to check it out. And you will be surprised by the high-quality.
NSEI_OTS_AR-7.6 Download: https://www.dumpexam.com/NSEI_OTS_AR-7.6-valid-torrent.html