P.S. Free & New NSE6_SDW_AD-7.6 dumps are available on Google Drive shared by PassLeader: https://drive.google.com/open?id=142cwJv6D-oBFolBPN-_qpII1SeNd6mIK
PassLeader is engaged in studying valid exam simulation files with high passing rate many years. If you want to find valid Fortinet NSE6_SDW_AD-7.6 exam simulations, our products are helpful for you. Our Fortinet NSE6_SDW_AD-7.6 Exam Simulations will assist you clear exams and apply for international companies or better jobs with better benefits in the near future.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN Rules and Performance Optimization | - Traffic shaping and application steering - Link health monitoring and SLA targets - SD-WAN rules and service configuration |
| Topic 2: Monitoring and Troubleshooting | - Diagnostics and logging analysis - SD-WAN monitoring tools and dashboards - Common SD-WAN issues and resolution |
| Topic 3: SD-WAN Concepts and Architecture | - Fortinet SD-WAN solution overview - SD-WAN topology and deployment models - Traffic steering and path selection concepts |
| Topic 4: Security and Integration | - Security profiles in SD-WAN environments - Integration with Fortinet Security Fabric |
| Topic 5: Deployment and Configuration | - SD-WAN interface configuration - Initial SD-WAN setup on FortiGate - Routing and policy-based configuration |
>> New NSE6_SDW_AD-7.6 Test Test <<
The Fortinet world is changing its dynamics at a fast pace. This trend also impacts the Fortinet NSE6_SDW_AD-7.6 certification exam topics. The new topics are added on regular basis in the Fortinet NSE6_SDW_AD-7.6 exam syllabus. You need to understand these updated NSE6_SDW_AD-7.6 exam topics or any changes in the syllabus. It will help you to not miss a single Fortinet NSE 6 - SD-WAN 7.6 Enterprise Administrator (NSE6_SDW_AD-7.6) exam question in the final exam. The PassLeader understands this problem and offers the perfect solution in the form of PassLeader NSE6_SDW_AD-7.6 updated exam questions.
NEW QUESTION # 113
Refer to the exhibit.
The administrator analyzed the traffic between a branch FortiGate and the server located in the data center, and noticed the behavior shown in the diagram.
When the LAN clients located behind FGT1 establish a session to a server behind DC-1, the administrator observes that, on DC-1, the reply traffic is routed overT2. even though T1 is the preferred member in the matching SD-WAN rule.
What can the administrator do to instruct DC-1 to route the reply traffic through the member with the best performance?
Answer: D
NEW QUESTION # 114
You have configured the performance SLA with the probe mode as Prefer Passive.
What are two observable impacts of this configuration? (Choose two.)
Answer: A,B
Explanation:
In FortiOS 7.6, when a Performance SLA probe mode is set to Prefer Passive, FortiGate attempts to measure link performance using passive monitoring first, based on real user traffic. Only when passive monitoring is not possible does FortiGate temporarily fall back to active probing.
With Prefer Passive, FortiGate passively monitors TCP traffic flowing through the SD-WAN member to calculate SLA metrics such as latency, jitter, and packet loss. This behavior directly matches option A.
During passive monitoring, FortiGate relies on observed traffic to infer link health. Because no synthetic probes are sent, a completely dead link (with no traffic passing) cannot be detected by the SLA during passive mode. As a result, dead members may not be immediately detected, which makes option D correct.
Option B is incorrect because there is no fixed 3-minute timer defined in FortiOS 7.6 that forces a return from active probing back to passive monitoring.
Option C is incorrect because passive SLA monitoring is based on TCP traffic, not ICMP traffic. ICMP is used for active probing, not passive monitoring.
Option E is incorrect because traffic subject to passive SLA monitoring cannot be offloaded to hardware.
Passive SLA measurement requires software inspection of packets, which prevents NPU offloading.
Therefore, the two correct observable impacts of configuring the probe mode as Prefer Passive are A and D.
NEW QUESTION # 115
Within the context of SD-WAN, what does SIA correspond to?
Answer: B
NEW QUESTION # 116
(Refer to the exhibit.
You update the spokes configuration of an existing auto-discovery VPN (ADVPN) topology by adding the parameters shown in the exhibit.
Which is a valid objective of those settings? Choose one answer.)
Answer: B
Explanation:
The exhibit shows the following IPsec phase1-interface configuration applied on spoke tunnels:
* set auto-discovery-shortcuts dependent
* set network-overlay enable
* set network-id <value>
In the FCSS SD-WAN 7.6 ADVPN architecture, the network-overlay and network-id parameters are used to logically group IPsec tunnels into separate overlays. When network-overlay is enabled, FortiGate treats the tunnel as part of an overlay network rather than a simple transport tunnel.
The network-id parameter is critical in multi-overlay ADVPN designs. Fortinet documentation specifies that ADVPN shortcuts are only allowed between tunnels that share the same network-id. This mechanism explicitly prevents cross-overlay shortcuts, ensuring that shortcuts are formed only within the same logical overlay and not across different overlays that may serve different purposes (for example, different hubs, regions, or transport groups).
The use of auto-discovery-shortcuts dependent further enforces correct shortcut behavior by ensuring that shortcut tunnels depend on the state of the parent overlay tunnel, but it does not by itself prevent multiple shortcuts or convert ADVPN versions.
Why the other options are incorrect:
* Option A is incorrect because simply enabling network-overlay does not exist to "enable overlay links" in general; its purpose is to define overlay membership and control shortcut behavior.
* Option B is incorrect because there is no concept of "ADVPN 2.0" conversion using these parameters in FortiOS 7.6.
* Option D is incorrect because preventing multiple shortcuts over the same overlay is not controlled by network-id; multiple shortcuts within the same overlay are allowed when required.
Therefore, the valid objective of these settings is to prevent cross-overlay shortcuts, which corresponds to Option C.
NEW QUESTION # 117
The administrator uses the FortiManager SD-WAN overlay template to prepare an SD-WAN deployment. Using information provided through the SD-WAN overlay template wizard, FortiManager creates templates ready to install on the spoke and hub devices.
What are the three templates created by the SD-WAN overlay template for a spoke device?
(Choose three.)
Answer: C,D,E
Explanation:
CLI template โ Contains device-specific parameters (like local interface IPs).
BGP template โ Configures dynamic routing for overlay tunnels.
IPsec tunnel template โ Builds the IPsec VPN tunnels from the spoke to the hubs.
NEW QUESTION # 118
......
On the one hand, by the free trial services you can get close contact with our products, learn about the detailed information of our NSE6_SDW_AD-7.6 study materials, and know how to choose the different versions before you buy our products. On the other hand, using free trial downloading before purchasing, I can promise that you will have a good command of the function of our NSE6_SDW_AD-7.6 Exam prepare. According to free trial downloading, you will know which version is more suitable for you in advance and have a better user experience.
Reliable NSE6_SDW_AD-7.6 Dumps Questions: https://www.passleader.top/Fortinet/NSE6_SDW_AD-7.6-exam-braindumps.html
2026 Latest PassLeader NSE6_SDW_AD-7.6 PDF Dumps and NSE6_SDW_AD-7.6 Exam Engine Free Share: https://drive.google.com/open?id=142cwJv6D-oBFolBPN-_qpII1SeNd6mIK