P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by iPassleader: https://drive.google.com/open?id=10LhUFF3qb0XyTyFaq6REF9sAN6nbovLZ
The rapid development of information will not infringe on the learning value of our EDGE-Expert study materials, because our customers will have the privilege to enjoy the free update for one year. You will receive the renewal of EDGE-Expert study materials through the email. And our EDGE-Expert study materials have three different version can meet your demands. Firstly, PDF version is easy to read and print. Secondly software version does not limit to the number of installed computers, and it simulates the Real EDGE-Expert Exam environment, but it can only run on Windows operating system.
| Section | Weight | Objectives |
|---|---|---|
| EDGE Fundamentals & Framework | 20% | - Core principles of EDGE
|
| Materials & Embodied Carbon | 15% | - Embodied energy baseline
|
| Energy Efficiency | 25% | - Energy-saving strategies
|
| Water Efficiency | 20% | - Water conservation measures
|
| EDGE Software & Application | 10% | - Project documentation
|
| Certification Process & Roles | 10% | - Steps to certification
|
>> EDGE-Expert New Test Bootcamp <<
EDGE-Expert exam dumps allow free trial downloads. You can get the information you want to know through the trial version. After downloading our study materials trial version, you can also easily select the version you like, as well as your favorite EDGE-Expert Exam Prep, based on which you can make targeted choices. Our study materials want every user to understand the product and be able to really get what they need.
NEW QUESTION # 76
Which of the following properties of glass are used in EDGE?
Answer: B
Explanation:
In the CBCI EDGE curriculum, glazing performance is characterized using properties that directly influence solar heat gains through windows, because this is a major driver of cooling energy demand in many climates.
The EDGE software uses Solar Heat Gain Coefficient, which represents the fraction of incident solar radiation that enters the building as heat through the glazing system. A lower SHGC reduces solar heat entering the indoor space, lowering cooling loads and improving the project's energy savings in the improved case.
Shading Coefficient is an older metric that is sometimes referenced in market literature, but EDGE standardizes the glazing solar performance input using SHGC for consistency across regions and products.
Solar Heat Loss Coefficient is not a standard glazing metric used in EDGE; heat loss through glazing is addressed using thermal transmittance measures such as U-value rather than an SHLC parameter. Solar Reflectivity may be relevant for certain roof or surface materials, but it is not the primary glazing property used in EDGE to quantify solar heat admitted indoors. Therefore, the correct glass property used in EDGE among the options provided is SHGC.
NEW QUESTION # 77
Is it possible to be both the EDGE Expert and Auditor on a project?
Answer: A
Explanation:
The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: "An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert's role as a consultant advising the project team could bias the Auditor's objective assessment of the project's compliance with EDGE standards" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: "No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: "Allowing dual roles in all cases would undermine the impartiality required for certification" (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: "Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit" (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: "The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification" (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.
NEW QUESTION # 78
In the EDGE software, which of the following does NOT produce grey water?
Answer: B
Explanation:
Within the CBCI EDGE curriculum, greywater is defined as relatively low-contamination wastewater generated from bathing and handwashing activities, typically coming from fixtures such as showers, wash basins, and bathtubs. This type of wastewater is considered suitable for recovery and reuse in certain non- potable applications, depending on local codes and the treatment approach, because it does not contain toilet waste.
A water closet WC produces blackwater, not greywater. Blackwater contains fecal matter and urine and therefore has a much higher pathogen load and organic content. Because of this, it requires more stringent treatment processes and different health and safety controls compared with greywater systems. In EDGE water measures, greywater reuse calculations and strategies are based on sources like showers and hand basins, while toilet discharge is excluded from greywater source assumptions.
Therefore, among the listed fixtures, the one that does not produce greywater in EDGE is the water closet WC, making option D the correct answer.
NEW QUESTION # 79
A building owner tells an EDGE Auditor that water-efficient faucets are in the building's restrooms.
However, the specifications on the faucets are not provided. The Auditor should:
Answer: C
Explanation:
EDGE Auditors must adhere to strict protocols ensuring that all claimed measures are supported by verifiable evidence, especially during audits. The EDGE Expert and Auditor Protocols state: "If a claimed measure, such as water-efficient faucets, lacks supporting documentation like specifications or manufacturer's data sheets, the Auditor must exclude the measure from the project assessment. The Auditor is not permitted to test equipment, substitute evidence, or mandate replacements, as their role is to verify, not rectify, the Client's submission" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option A, exclude the faucets from the project, aligns with this protocol, as the lack of specifications prevents verification. Option B (test the faucets' flow rates) is incorrect, as Auditors cannot conduct tests: "Auditors are not responsible for testing equipment; they must rely on provided documentation" (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option C (require the owner to replace the faucets) oversteps the Auditor's role:
"Auditors cannot mandate changes to the project; they assess what is submitted" (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (find a product with the same parameters) is also prohibited: "Auditors cannot substitute or assume evidence on behalf of the Client" (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Thus, the Auditor should exclude the faucets (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements.
NEW QUESTION # 80
Which of the following is an EDGE measure to reduce the embodied energy in materials?
Answer: B
Explanation:
Embodied energy in materials is one of the three core pillars of the EDGE standard, focusing on reducing the environmental impact of construction materials. The EDGE User Guide lists measures that specifically target embodied energy: "To reduce embodied energy in materials, EDGE includes measures such as the use of fly ash concrete, which substitutes a portion of cement with fly ash, a byproduct of coal combustion, thereby lowering the embodied energy and carbon footprint of concrete production" (EDGE User Guide, Section 7.2:
Materials Efficiency Measures). Option B, fly ash concrete, directly aligns with this measure, as it reduces the need for high-energy cement production. Option A (external shading) impacts energy by reducing cooling loads but does not directly address embodied energy: "External shading reduces operational energy use but does not contribute to embodied energy savings unless the shading materials themselves are low-impact, which is not specified in EDGE" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (occupancy sensors) is an energy efficiency measure for lighting, not materials: "Occupancy sensors reduce lighting energy use but have no direct impact on embodied energy in materials" (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). Option D (low-flow shower heads) targets water efficiency, not materials:
"Low-flow shower heads reduce water consumption, but their embodied energy impact is minimal and not a focus of EDGE materials measures" (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE MethodologyReport further elaborates: "Fly ash concrete can reduce embodied energy by up to 20% compared to traditional concrete, making it a key measure in EDGE for materials efficiency, especially in high-volume applications like hospitals or hotels" (EDGE Methodology Report Version 2.0, Section 6.1:
Embodied Energy in Materials). Other materials measures in EDGE, such as using recycled steel or bamboo, are not listed among the options, making fly ash concrete (Option B) the correct choice for reducing embodied energy.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 3.5: Passive Design Strategies, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.
NEW QUESTION # 81
......
Perhaps you have had such an unpleasant experience about what you brought in the internet was not suitable for you in actual use, to avoid this, our company has prepared EDGE-Expert free demo in this website for our customers. The content of the free demo is part of the content in our real EDGE-Expert study guide. Therefore, you can get a comprehensive idea about our real study materials. All you need to do is just to find the "Download for free" item, and you will find there are three kinds of versions of EDGE-Expert Learning Materials for you to choose from namely, PDF Version Demo, PC Test Engine and Online Test Engine, you can choose to download any one as you like.
Valid Exam EDGE-Expert Preparation: https://www.ipassleader.com/EDGE/EDGE-Expert-practice-exam-dumps.html
BONUS!!! Download part of iPassleader EDGE-Expert dumps for free: https://drive.google.com/open?id=10LhUFF3qb0XyTyFaq6REF9sAN6nbovLZ