What's more, part of that Actual4Dumps SD-WAN-Engineer dumps now are free: https://drive.google.com/open?id=1h-cR0EKHm4qrEaFmyHYYcUASo1hzyDgM
Passing the exam rests squarely on the knowledge of exam questions and exam skills. Our SD-WAN-Engineer training quiz has bountiful content that can fulfill your aims at the same time. We know high efficient SD-WAN-Engineer practice materials play crucial roles in your review. Our experts also collect with the newest contents and have been researching where the exam trend is heading and what it really want to examine you. By analyzing the syllabus and new trend, our SD-WAN-Engineer Practice Engine is totally in line with this exam for your reference. So grapple with this chance, our SD-WAN-Engineer practice materials will not let you down.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> SD-WAN-Engineer Valid Torrent <<
Compared with the other products in the market, our SD-WAN-Engineer latest questions grasp of the core knowledge and key point of the real exam, the targeted and efficient Palo Alto Networks SD-WAN Engineer study training dumps guarantee our candidates to pass the test easily. Passing exam wonโt be a problem anymore as long as you are familiar with our SD-WAN-Engineer Exam Material (only about 20 to 30 hours practice). High accuracy and high quality are the reasons why you should choose us.
NEW QUESTION # 29
What is the purpose of Secure Group Tag (SGT) propagation in Prisma SD-WAN?
Answer: A
Explanation:
In modern enterprise environments, maintaining a consistent security posture across disparate network domains is a major challenge. Prisma SD-WAN addresses this by supporting Secure Group Tag (SGT) propagation. SGTs are a key component of Cisco's TrustSec architecture, used to classify traffic based on the identity of the source (users, devices, or groups) rather than just IP addresses. By supporting SGT propagation, Prisma SD-WAN allows organizations to integrate with external identity-based security solutions seamlessly.
When traffic enters an ION device from a LAN segment where SGTs are already applied (typically by an access layer switch or an Identity Services Engine), the ION device can be configured to preserve or
"propagate" these tags as the traffic traverses the SD-WAN fabric.6 This ensures that the identity context remains intact even after the traffic has crossed the WAN.7 When the traffic reaches its destination-whether that is a data center, another branch, or a security gateway-the receiving device can use the SGT to enforce granular security policies.
This integration is vital for organizations moving toward a Zero Trust architecture. Instead of rewriting complex firewall rules at every hop, the SGT acts as a portable identity badge. Prisma SD-WAN's ability to handle these tags allows it to participate in a larger security ecosystem, ensuring that a "Finance" user is treated with the same security restrictions at a remote branch as they would be at the corporate headquarters.
This eliminates the need for manual IP-to-Group mapping across the WAN, reducing administrative overhead and minimizing the risk of security gaps during lateral movement of traffic.
NEW QUESTION # 30
In a data center (DC) with two ION devices, all of the remote branch Prisma SD-WAN VPNs are active only on DC ION-1.
Why are no VPNs active on DC ION-2?
Answer: C
Explanation:
Comprehensive and Detailed Explanation
In a Prisma SD-WAN Data Center deployment, the operational state of the Secure Fabric VPNs (overlay tunnels) is directly tied to the health of the BGP Core Peer configuration.4 Core Peer Dependency: DC ION devices typically peer with the data center core switch (Core Router) via BGP to learn the subnets (prefixes) for the applications hosted in the DC. The Prisma SD-WAN controller monitors this BGP peering status.5 Controller Logic: If the BGP Core Peer on a DC ION goes down (or is not established), the controller automatically marks the VPN tunnels terminating at that specific ION as "Inactive".6 This is a fail-safe mechanism designed to prevent remote branches from sending traffic to a DC ION that has lost conne7ctivity to the internal data center network (and thus the applications).
Scenario Analysis: In this scenario, DC ION-1 has active VPNs, meaning its BGP Core Peer is UP and it is successfully advertising reachability. DC ION-2 has no active VPNs, which strongly indicates that its BGP Core Peer is down.8 Because the controller sees the peer is down, it suppresses the tunnel establishment or marks existing tunnels as inactive to ensure traffic is only directed to the healthy node (ION-1).
NEW QUESTION # 31
An administrator is configuring an ION 2000 device for a deployment where high availability is required, but the site has only a single internet circuit. The administrator configures a Bypass Pair (Fail-to-Wire) on ports 1 and 2 connecting the ISP modem to the legacy firewall.
If the ION device loses power, what is the resulting behavior of the traffic flowing through this Bypass Pair?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
The Bypass Pair feature on Prisma SD-WAN ION devices (specifically supported models like ION 2000, 3000, 7000, 9000) is a hardware-based resiliency mechanism known as Fail-to-Wire.
Operation: A "Bypass Pair" logically groups two physical interfaces (e.g., WAN 1 and LAN 1). Under normal operation, the ION processes traffic between them.
Power Loss: In the event of a total power loss (or critical software failure), a mechanical relay inside the device physically closes the circuit between the two ports.
Result: This creates a direct electrical connection (like a patch cable) between the upstream device (ISP Modem) and the downstream device (Legacy Firewall or Router). This ensures that internet connectivity is preserved for the site, even if the SD-WAN appliance is completely dead. This is critical for single-point-of-failure deployments where maintaining basic dial-tone is more important than SD-WAN optimization during a hardware outage.
NEW QUESTION # 32
A site has two internet circuits: Circuit A with 500 Mbps capacity and Circuit B with 100 Mbps capacity.
Which path policy configuration will ensure traffic is automatically shifted from a saturated circuit to the circuit with available bandwidth?
Answer: D
Explanation:
Comprehensive and Detailed Explanation
In Prisma SD-WAN (CloudGenix), Path Policies control how application traffic is steered across WAN links.
To ensure that traffic is automatically shifted from a saturated circuit to another circuit with available bandwidth, both circuits must be configured as Active Paths within the policy rule.
When multiple paths are designated as "Active," the ION device treats them as a shared pool of available resources. The system continuously monitors the bandwidth utilization (capacity) and health (latency, jitter, loss) of all active links. If "Circuit A" (500 Mbps) becomes saturated or approaches its defined bandwidth limit, the ION's intelligent scheduler will automatically direct new application flows to "Circuit B" (100 Mbps) because it is a valid, healthy Active path with available capacity. This achieves effective load balancing and bandwidth aggregation.
In contrast, configuring "Circuit B" as a Backup Path (Option A or B) creates a strict priority relationship.
Traffic would only move to the Backup path if the Active path completely failed or violated its configured SLA (Path Quality Profile) significantly enough to be considered "down." Mere bandwidth saturation might not trigger an SLA failure immediately, potentially leading to dropped packets on the saturated link while the backup link remains idle. Therefore, placing Both circuits under active path is the correct configuration for dynamic capacity management.
NEW QUESTION # 33
A remote branch site is reporting intermittent connectivity to the Data Center. The administrator checks the System > Alarms page and sees a "VPN_DOWN" alarm for the tunnel to the DC. However, the internet circuit status is "Up".
Which specific log file or diagnostic tool in the Prisma SD-WAN portal would provide the IKE (Internet Key Exchange) error codes (e.g., "NO_PROPOSAL_CHOSEN" or "AUTH_FAILED") to pinpoint the cause of the tunnel failure?
Answer: A
Explanation:
Comprehensive and Detailed Explanation
To diagnose specific VPN negotiation failures (Phase 1 or Phase 2 IPSec issues), the Event Logs (specifically filtered for System or VPN events) are the correct resource.
Event Logs: This section records the control plane signaling messages. If a VPN tunnel fails to establish, the Event Log will generate an entry containing the specific IKE failure reason sent by the peer or generated locally. Common errors found here include INVALID_COOKIE, NO_PROPOSAL_CHOSEN (mismatch in encryption algorithms), or PRE_SHARED_KEY_MISMATCH.
Flow Browser (A): This shows user traffic (TCP/UDP sessions). If the VPN is down, user traffic won't even enter the tunnel, so the Flow Browser will just show dropped flows or blackholes, but it won't explain why the tunnel itself is broken.
Link Quality (D): This shows latency/loss graphs for established tunnels. It cannot diagnose why a tunnel failed to form in the first place.
NEW QUESTION # 34
......
Many candidates find the Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) exam preparation difficult. They often buy expensive study courses to start their Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) certification exam preparation. However, spending a huge amount on such resources is difficult for many Palo Alto Networks SD-WAN-Engineer Exam applicants. The latest Palo Alto Networks SD-WAN-Engineer exam dumps are the right option for you to prepare for the Palo Alto Networks SD-WAN Engineer (SD-WAN-Engineer) certification test at home.
SD-WAN-Engineer Dumps Guide: https://www.actual4dumps.com/SD-WAN-Engineer-study-material.html
P.S. Free & New SD-WAN-Engineer dumps are available on Google Drive shared by Actual4Dumps: https://drive.google.com/open?id=1h-cR0EKHm4qrEaFmyHYYcUASo1hzyDgM