PassTIP H12-893_V1.0 최신 PDF 버전 시험 문제집을 무료로 Google Drive에서 다운로드하세요: https://drive.google.com/open?id=1fTsUMAoFEvZF3MfwWrzeAaVusB-JOvFq
IT업계에 종사하는 분들은 치열한 경쟁을 많이 느낄것입니다. 치열한 경쟁속에서 자신의 위치를 보장하는 길은 더 많이 배우고 더 많이 노력하는것 뿐입니다.국제적으로 인정받은 IT인증자격증을 취득하는것이 제일 중요한 부분이 아닌가 싶기도 합니다. 다른 분이 없는 자격증을 내가 소유하고 있다는 생각만 해도 뭔가 안전감이 느껴지지 않나요? 더는 시간낭비하지 말고PassTIP의Huawei인증 H12-893_V1.0덤프로Huawei인증 H12-893_V1.0시험에 도전해보세요.
| Certification Vendor: | Huawei |
|---|---|
| Exam Name: | HCIP-Data Center Network V1.0 |
| Exam Number: | H12-893_V1.0 |
| Available Languages: | Spanish, English, Chinese |
| Real Exam Qty: | 60-70 |
| Exam Duration: | 90 minutes |
| Passing Score: | 600/1000 |
| Related Certifications: | HCIA-Data Center Network HCIE-Data Center Network |
| Certificate Validity Period: | 3 years |
| Exam Format: | True or False, Single Choice, Drag and Drop, Multiple Choice |
| Exam Price: | USD 300 |
| Sample Questions: | Huawei H12-893_V1.0 Sample Questions |
| Exam Way: | Pearson VUE Test Center / Online Proctoring |
| Pre Condition: | Recommended: HCIA-Data Center Network or equivalent knowledge |
| Official Syllabus URL: | https://cn.e-learning.huawei.com/#/courseDetail?courseId=2af1061c01a64c4d9c5e85c7b5d55dc2 |
>> H12-893_V1.0최고품질 인증시험공부자료 <<
IT업계에 계속 종사하고 싶은 분이라면 자격증 취득은 필수입니다. Huawei H12-893_V1.0시험은 인기 자격증을 필수 시험과목인데Huawei H12-893_V1.0시험부터 자격증취득에 도전해보지 않으실래요? Huawei H12-893_V1.0덤프는 이 시험에 대비한 가장 적합한 자료로서 자격증을 제일 빠르게 간편하게 취득할수 있는 지름길입니다. 구매전 덤프구매사이트에서 DEMO부터 다운받아 덤프의 일부분 문제를 체험해보세요.
| 주제 | 소개 |
|---|---|
| 주제 1 |
|
| 주제 2 |
|
| 주제 3 |
|
| 주제 4 |
|
질문 # 21
iMaster NCE-Fabric is Huawei's DC controller. Tenants can use it to create VPCs and deploy logical networks as required. After logical NEs are deployed, the corresponding network configurations are delivered to underlying network devices. Which of the following statements is false about the delivered network configurations?
정답：B
설명：
iMaster NCE-Fabric automates network configuration delivery in Huawei's CloudFabric. Let's evaluate each statement:
A). Logical switches are mainly used for Layer 3 communication between hosts on a VXLAN network. These switches correspond to Layer 3 gateway configurations such as VBDIF interface and VPN instance configurations on physical devices: This is false. Logical switches in iMaster NCE-Fabric primarily handle Layer 2 communication (e.g., bridging within a VNI), corresponding to Bridge Domains (BDs) and Layer 2 VNIs. Layer 3 communication is managed by gateways, not logical switches. FALSE.
B). An end port represents an online host. It corresponds to the traffic encapsulation type (whether a VLAN tag is carried) configured on a Layer 2 sub-interface of a physical device: This is true.
End ports map to host connections, with encapsulation (VLAN-tagged or untagged) configured on sub-interfaces. TRUE.
C). A logical port is equivalent to an independent physical port that is used by a host to connect to a VXLAN network. It corresponds to the Layer 2 sub-interface configuration on a physical device:
This is true. Logical ports represent host connections, mapped to Layer 2 sub-interfaces for VXLAN access. TRUE.
D). Logical switches are mainly used for Layer 2 communication between hosts on a VXLAN network. These switches correspond to BD and Layer 2 VNI configurations on physical devices:
This is true. Logical switches facilitate Layer 2 connectivity, aligning with BD and VNI settings.
TRUE.
Thus, A is the false statement because logical switches are for Layer 2, not Layer 3, communication.
질문 # 22
After an M-LAG works properly, the two member devices synchronize information with each other in real time. Which of the following pieces of information are synchronized between devices?
(Select All that Apply)
정답：B,D
설명：
In Huawei's M-LAG (Multi-Chassis Link Aggregation) on CE series switches, the two member devices synchronize critical information over the peer-link to ensure seamless operation and failover. Let's evaluate each option:
A). ACL information: Access Control List (ACL) configurations are typically not synchronized in M- LAG, as they are device-specific security policies. Synchronization of ACLs is not a standard feature in Huawei's M-LAG implementation. NOT SYNCHRONIZED.
B). STP status: Spanning Tree Protocol (STP) status (e.g., port roles, states) is synchronized to maintain a consistent loop-free topology across M-LAG peers, especially when V-STP or other STP variants are used. SYNCHRONIZED.
C). Device name: Device names are administrative identifiers and are not synchronized, as they do not impact traffic forwarding or M-LAG functionality. NOT SYNCHRONIZED.
D). LACP information: Link Aggregation Control Protocol (LACP) status (e.g., link states, aggregation details) is synchronized to ensure both M-LAG devices present a unified LAG to downstream devices, supporting load balancing and failover. SYNCHRONIZED.
Thus, B (STP status) and D (LACP information) are synchronized between M-LAG devices.
질문 # 23
Which of the following statements is false about VXLAN tunnel establishment?
정답：A
설명：
VXLAN (Virtual Extensible LAN) tunnels are used to encapsulate Layer 2 traffic over a Layer 3 network, a key component in Huawei's CloudFabric data center solutions. Let's evaluate each statement:
A . A VXLAN tunnel is identified by a pair of VTEPs: This is true. A VXLAN tunnel is identified by the pair of VXLAN Tunnel Endpoint (VTEP) IP addresses (local and remote), along with the VNI (VXLAN Network Identifier). This ensures unique tunnel identification. TRUE.
B . After a tunnel is established, if one end of the tunnel goes Down, the other end may not go Down: This is true. VXLAN tunnels are unidirectional, and the status of one end does not automatically affect the other unless the underlay network connectivity (e.g., Layer 3 reachability) is lost. The remote VTEP may remain operational if it can still encapsulate/decapsulate traffic. TRUE.
C . For a static tunnel, you need to manually configure the local and remote VNIs: This is true. In a static VXLAN tunnel, administrators must manually configure the VNI and VTEP IP addresses on both ends, as there is no dynamic control plane (e.g., BGP EVPN) to automate the process. TRUE.
D . Dynamic tunnels depend on EVPN Type 5 routes to transmit information: This is false. Dynamic VXLAN tunnels rely on BGP EVPN as the control plane, but Type 5 routes (IP Prefix routes) are specifically used for advertising host IP routes and external network routes, not for general tunnel establishment. Dynamic tunnel setup primarily uses Type 2 (MAC/IP Advertisement) and Type 3 (Multicast) routes to exchange VNI and VTEP information. Type 5 routes are relevant for Layer 3 routing, not the initial tunnel setup. FALSE.
Thus, D is the false statement because dynamic tunnels depend on EVPN Type 2 and Type 3 routes, not Type 5, for initial establishment.
질문 # 24
A network architect chooses IS-IS rather than OSPF for the underlay. Which statement correctly describes this design decision?
정답：A
설명：
Both IS-IS and OSPF are widely deployed as underlay routing protocols. EVPN operates independently of the chosen IGP, provided reliable IP connectivity exists between VTEPs throughout the data center network.
질문 # 25
Which of the following statements are true about a routing design that employs OSPF on the underlay network of a DC? (Select All that Apply)
정답：A,C
설명：
OSPF (Open Shortest Path First) is a routing protocol used in the underlay network of Huawei's CloudFabric DCNs. Let's evaluate each statement:
A . Typically, the IP address of Loopback0 is configured as the VTEP IP address and the same IP address is planned for active-active leaf nodes in the same group: This is true. Loopback0 IP is commonly used as the VTEP IP for stability, and in active-active leaf node groups (e.g., M-LAG), the same IP can be configured with VRRP or anycast to ensure consistency. TRUE.
B . The network type of spine and leaf nodes can be set to P2P in order to accelerate convergence: This is true. Setting OSPF network type to Point-to-Point (P2P) on spine-leaf links reduces overhead (e.g., no DR/BDR election) and speeds up convergence, a recommended practice in Huawei DCNs. TRUE.
C . This routing design is recommended when the DC has more than 300 switches: This is false. OSPF is suitable for smaller to medium-sized DCNs (e.g., up to 200-300 switches). For larger networks (>300 switches), EBGP is preferred due to better scalability and reduced complexity. FALSE.
D . It is recommended that all devices be planned in Area 0: This is false. While a single Area 0 is possible for small DCNs, multi-area OSPF is recommended for larger networks to manage scalability and reduce routing table size, avoiding a flat Area 0 design. FALSE.
Thus, A and B are true statements about OSPF routing design in a DC underlay.
질문 # 26
......
H12-893_V1.0유효한 덤프자료: https://www.passtip.net/H12-893_V1.0-pass-exam.html
그리고 PassTIP H12-893_V1.0 시험 문제집의 전체 버전을 클라우드 저장소에서 다운로드할 수 있습니다: https://drive.google.com/open?id=1fTsUMAoFEvZF3MfwWrzeAaVusB-JOvFq