If you haplessly fail the JN0-352 exam, we treat it as our blame then give back full refund and get other version of practice material for free. In contrast we feel as happy as you are when you get the desirable outcome and treasure every breathtaking moment of your review. If you still feel bemused by our JN0-352 Exam Questions, contact with our courteous staff who will solve your problems any time and they will give you the right advices on our JN0-352 study materials.
| Section | Objectives |
|---|---|
| Topic 1: Protocol-Independent Routing | - Martian addresses and RIB groups - Static, aggregate, generated routes - Load balancing and filter-based forwarding |
| Topic 2: OSPF | - Router ID, adjacencies and neighbors - Areas and LSA types - Link-state database and packet types |
| Topic 3: Layer 2 Switching and VLANs | - Native VLANs and voice VLANs - Inter-VLAN routing - Ports and VLAN tagging - Frame processing - Bridging components |
| Topic 4: BGP | - EBGP and IBGP peer interactions - BGP basic operations and message types - Attributes and path selection |
| Topic 5: Spanning Tree | - Bridge Protocol Data Units (BPDUs) - STP and RSTP concepts, roles and states - Convergence and reconvergence |
| Topic 6: IS-IS | - Link-state database and PDUs - Adjacencies and troubleshooting - Levels, areas and metrics |
| Topic 7: Layer 2 Security | - Port security (MAC limiting, DHCP snooping, DAI, IP source guard) - BPDU, loop and root protection - Layer 2 firewall filters - MACsec and storm control |
| Topic 8: High Availability | - VRRP, NSR, NSB and BFD - Link Aggregation Groups and RTG - Virtual chassis and graceful restart |
| Topic 9: Tunnels | - IP tunneling concepts - GRE and IP-IP configuration and troubleshooting |
With the Juniper JN0-352 PDF questions file, you can prepare for the Juniper JN0-352 test on the go since the format is portable and works with all smart devices. The Juniper JN0-352 probable exam questions in PDF save you time so that you do not have to go through sleepless nights owing to a tight daily routine.
NEW QUESTION # 134
Refer to Exhibit:
You have applied a firewall filter as an ingress filter on the ge-0/0/0 interface of your Juniper Networks EX Series Switch as shown in the exhibit. An external host sends an ICMP ping packet to the router.
Which statement is correct about how this packet is processed?
Answer: D
Explanation:
Junos firewall filters evaluate terms sequentially from top to bottom, and a term is only terminal for a packet if its then clause contains an explicit terminating action such as accept, discard, reject, or next term without a match. The count and log actions used in track-icmp are non-terminating; they update statistics and generate a log entry but do not stop evaluation, so a matching ICMP packet falls through to the next term after being counted. The second term, allow-tcp-established, matches only TCP packets carrying the ACK or RST flags as defined by the tcp-established keyword; an ICMP echo request does not satisfy protocol tcp, so this term is skipped entirely and does not accept the packet. Evaluation therefore reaches the implicit catch-all term block- rest, which has no from conditions and matches every remaining packet, incrementing blocked-counter and discarding it. The net effect for the described ICMP ping is that icmp-counter is incremented by the first term, the packet is neither accepted nor rejected by the second term, and blocked-counter is incremented immediately before the packet is silently discarded by the final term. This layered-term behavior, where counting is independent of the accept/discard decision, is a frequently tested nuance of Junos firewall filter processing logic. Reference topics: Junos Enterprise Switching - Layer 2 Security and Firewall Filters, Filter Term Evaluation Order.
NEW QUESTION # 135
You need to block SSH (TCP port 22) traffic from the 192.168.10.0/24 network. Which firewall filter term is correct in this scenario?
Answer: B
Explanation:
Correctly blocking SSH traffic originating from a specific network requires matching three precise conditions simultaneously in the from clause: the traffic's source-address must equal the
192.168.10.0/24 network, since the requirement is to block traffic coming from that network rather than traffic destined to it; the protocol must be explicitly set to tcp, since SSH operates exclusively over TCP; and the destination-port must be set to 22, because an inbound SSH connection request is always directed at the well-known SSH listening port 22 on the receiving side, regardless of which ephemeral source port the initiating client happens to use. The first option satisfies all three conditions correctly and pairs them with a discard action, cleanly dropping matching traffic. The second option incorrectly substitutes destination-address for source- address, which would match traffic heading toward that /24 rather than traffic originating from it, inverting the intended match direction. The third option incorrectly uses source-port 22 instead of destination-port 22; since the SSH client's source port is a randomly assigned ephemeral value rather than a fixed 22, this term would almost never match real SSH session-initiation traffic. The fourth option relies on a service ssh match condition, which is not valid syntax within the standard Junos firewall filter grammar for family inet; there is no such application-based keyword available at that hierarchy, making the term invalid regardless of the reject action chosen.
NEW QUESTION # 136
Which statement is correct about the IS-IS ISO NET address?
Answer: C
Explanation:
An ISO NET address is a type of network address used by the IS-IS routing protocol. It identifies a point of connection to the network, such as a router interface, and is also called a Network Service Access Point (NSAP).
An ISO NET address consists of three parts: an area ID, a system ID, and a selector. The area ID identifies the IS-IS area to which the device belongs. The system ID uniquely identifies the device within the area. The selector identifies a specific service or function on the device, such as routing or management.
An ISO NET address must be unique for each device in the network, because it is used by IS-IS to establish adjacencies, exchange routing information, and compute shortest paths. If two devices have the same ISO NET address, they will not be able to communicate with each other or with other devices in the network. Therefore, it is important to assign different ISO NET addresses to each device in the network.
NEW QUESTION # 137
You are troubleshooting an issue where traffic to 192.168.10.0/24 is being sent to R1 instead of your desired path through R2.
Referring to the exhibit, what is the reason for the problem?
Answer: A
Explanation:
The exhibit shows the output of the command show ip bgp, which displays information about the BGP routes in the routing table. The output shows two routes for the destination 192.168.10.0/24, one from R1 and one from R2.
The route from R1 has a local preference of 200, while the route from R2 has a local preference of 100. Local preference is a BGP attribute that indicates the degree of preference for a route within an autonomous system (AS). A higher local preference means a more preferred route.
BGP uses a best path selection algorithm to choose the best route for each destination among multiple paths. The algorithm compares different attributes of the routes in a specific order of precedence. The first attribute that is compared is weight, which is a Cisco-specific attribute that is local to the router. If the weight is equal or not set, the next attribute that is compared is local preference.
In this case, both routes have the same weight of 0, which means that they are learned from external BGP (eBGP) peers. Therefore, the next attribute that is compared is local preference.
Since R1's route has a higher local preference than R2's route, it is chosen as the best path and installed in the routing table. The other attributes, such as origin code and AS path, are not considered in this case.
NEW QUESTION # 138
You are asked to create a default route that will be advertised to your internal OSPF neighbors.
You have three upstream connections to the Internet and you must ensure that when available, all traffic uses ISP1 as your primary connection and only uses ISP2 and ISP3 when ISP1 is not available. Which solution should you implement in this scenario?
Answer: A
NEW QUESTION # 139
......
You can avail all the above-mentioned characteristics of the desktop software in this web-based Juniper JN0-352 practice test. While you appear in the Juniper JN0-352 real examination, you will feel the same environment you faced during our Juniper JN0-352 practice test.
JN0-352 Latest Exam Format: https://www.testvalid.com/JN0-352-exam-collection.html