Thanks to modern technology, learning online gives people access to a wider range of knowledge, and people have got used to convenience of electronic equipment. As you can see, we are selling our NSE6_EDR_AD-7.0 learning guide in the international market, thus there are three different versions of our NSE6_EDR_AD-7.0 exam materials: PDF, Soft and APP versions. It is worth mentioning that, the simulation test of our NSE6_EDR_AD-7.0 Study Guide is available in our software version. With the simulation test, all of our customers will get accustomed to the NSE6_EDR_AD-7.0 exam easily, and pass the exam with confidence.
| Section | Objectives |
|---|---|
| Topic 1: Forensics and Investigation | - Event analysis and telemetry review - Endpoint investigation workflows |
| Topic 2: FortiEDR Architecture and Components | - FortiEDR components overview (agents, management console, collectors) - System architecture and deployment models |
| Topic 3: System Administration and Troubleshooting | - System monitoring and health checks - Troubleshooting common FortiEDR issues |
| Topic 4: Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| Topic 5: Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
| Topic 6: Policy Configuration and Management | - Prevention and detection policies - Policy tuning and exclusions |
>> Valid NSE6_EDR_AD-7.0 Test Sims <<
We deeply know that the pass rate is the most important. As is well known to us, our passing rate has been high; Ninety-nine percent of people who used our NSE6_EDR_AD-7.0 real braindumps have passed their exams and get the certificates. I dare to make a bet that you will not be exceptional. Your test pass rate is going to reach more than 99% if you are willing to use our NSE6_EDR_AD-7.0 Study Materials with a high quality. So it is worthy for you to buy our NSE6_EDR_AD-7.0 practice prep.
NEW QUESTION # 19
What action does an on-premises reputation server take when it receives a hash request that is not found in its local database? (Choose one answer)
Answer: D
Explanation:
The correct answer is C .
The FortiEDR 7.0.0 Administration Guide states that for on-premises deployments, the on-premise reputation service requests missing hashes from the cloud reputation service . If a proxy is not enabled, it requests the missing hashes from the cloud reputation service through the manager nginx . If a proxy is enabled, the on-premises reputation service requests the missing hashes through the proxy.
So, when the local reputation database does not contain the requested hash, the on-premises reputation server does not ignore the request, wait for endpoint input, or automatically block the application. It queries the cloud reputation service for the missing hash reputation data.
=========
NEW QUESTION # 20
A collector attempts to access a known malicious website. FortiEDR is configured for eXtended detection with FortiAnalyzer. What two roles does Fortinet Cloud Services (FCS) perform in this process? (Choose two answers)
Answer: B,D
Explanation:
The correct answers are C and D .
The guide states that for eXtended Detection Source integration, FortiEDR connects to external systems to collect activity logs. The aggregated data is then sent to Fortinet Cloud Services (FCS) , where it is correlated and analyzed to detect malicious indications. Those malicious indications result in security events for eXtended Detection policy rule violations .
For FortiAnalyzer/FortiAnalyzer Cloud specifically, the guide states that this integration is used to correlate data between FortiEDR and the Fortinet Security Fabric and issue eXtended Detection alerts .
Option A is wrong because FCS does not send the original log record to FortiAnalyzer. FortiAnalyzer is the external source whose data is correlated with FortiEDR data. Option B is wrong because OS metadata is collected by the Collector and handled through FortiEDR components; the FCS role here is cloud-side enrichment, correlation, and detection, not sending OS metadata back to the manager.
=========
NEW QUESTION # 21
Which two Python commands are supported when using FortiEDR Connect to directly access a protected device shell? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A. %upload_file and B. %ipconfig_all .
The FortiEDR 7.0.0 Administration Guide states that FortiEDR Connect opens a console that provides direct access to a FortiEDR-protected device through a remote shell connection. This allows administrators to respond to incidents, run commands and scripts, collect and download forensic data, and remediate threats.
The guide also states that the FortiEDR Connect terminal has a prompt where commands can be typed, and the Help button displays the supported commands and their parameters.
The guide further confirms that FortiEDR Connect supports FortiEDR-specific commands, Windows command-line access through %cmd , and Python commands.
For the exact command list, Fortinet's official FortiEDR Connect technical tip lists the supported commands.
In that list, %ipconfig_all is explicitly described as returning extended IP information, and %upload_file is explicitly described as uploading a file to the specified path. ( Fortinet Community ) Options C. %psexec and D. %timestamp are not listed as supported FortiEDR Connect commands in the official Fortinet command list. Therefore, they must not be selected.
=========
=========
NEW QUESTION # 22
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
Answer: B,C
Explanation:
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
NEW QUESTION # 23
Refer to the exhibit.
Based on the exhibit, which statement about this threat hunting query is true? (Choose one answer)
Answer: B
Explanation:
The correct answer is A .
The exhibit shows a FortiEDR Threat Hunting saved query using RemotePort:3389, scoped to a specific device, with Scheduled Query enabled, classification set to Suspicious , and a repeat interval of 15 minutes .
TCP port 3389 is the standard RDP port, so the query is designed to detect RDP-related network activity for the selected endpoint.
The FortiEDR guide states that saving a Threat Hunting query can define it as a scheduled query to automate threat detection. It further states that when a scheduled query runs and detects matches, a security event is automatically created in the Incidents tab , and notifications are sent according to the security event configuration.
Option B is too absolute and therefore wrong. The specific query shown uses a network field, but Threat Hunting itself can search activity events across files, registry, network, processes, and event logs. Option C is wrong because the Community Query checkbox is not selected, so it is not configured as a shared community
/global query. The guide states that Community Query must be selected to share the query with the FortiEDR community, including other organizations.
Option D is wrong because a scheduled Threat Hunting query generates an incident; it does not automatically block RDP unless additional playbook actions are configured. The guide says scheduled queries generate security events and may trigger configured playbook actions, but the query itself is not a blocking control.
=========
NEW QUESTION # 24
......
Are you ready to accept this challenge? Looking for the simple, quick, and easiest way to pass the career advancement Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) certification exam? If your answer is yes then you do not need to worry about it. Just visit the TestkingPass and explore the top features of Fortinet NSE 6 - FortiEDR 7.0 Administrator (NSE6_EDR_AD-7.0) exam practice test questions offered by the trusted platform TestkingPass. With TestkingPass NSE6_EDR_AD-7.0 Dumps questions you can easily prepare well and feel confident to pass the final Fortinet NSE 6 - FortiEDR 7.0 Administrator exam easily.
NSE6_EDR_AD-7.0 New Exam Camp: https://www.testkingpass.com/NSE6_EDR_AD-7.0-testking-dumps.html