P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by Exams4Collection: https://drive.google.com/open?id=1HS_azreu1F0NlVebaVJfqy3q_8XWDmm_
The aim of Exams4Collection is help every candidates getting EDGE certification easily and quickly. Comparing to attending expensive training institution, EDGE-Expert dumps pdf is more suitable for people who are eager to passing actual test but no time and energy. If you decide to join us, you will receive valid EDGE-Expert learning study materials with real questions and detailed explanations.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: EDGE System Overview | 15% | - EDGE Certification Process
|
| Topic 2: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 3: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
| Topic 4: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 5: Water Efficiency & Materials | 25% | - Materials Embodied Energy (EE)
|
>> EDGE-Expert Valid Test Camp <<
Rather than pretentious help for customers, our after-seals services on our EDGE-Expert exam questions are authentic and faithful. Many clients cannot stop praising us in this aspect and become regular customer for good on our EDGE-Expert Study Guide. We have strict criterion to help you with the standard of our EDGE-Expert training materials. Our company has also being Customer First. So we consider the facts of your interest firstly.
NEW QUESTION # 20
Which of the following must be included in the EDGE Auditor submission for Preliminary Certification?
Answer: A
Explanation:
The EDGE Auditor's submission for Preliminary Certification (design stage) must include specific elements to support the recommendation for certification. The EDGE Certification Protocol specifies: "For Preliminary Certification, the EDGE Auditor's submission must include compliance documents for the selected measures, such as drawings, specifications, and manufacturer's data sheets, which verify that the design aligns with the self-assessment in the EDGE software. These documents are reviewed by the Certification Provider to confirm eligibility" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, compliance documents for selected measures, directly matches this requirement. Option A (all available design data) is too broad and not required: "Only documents directly related to the selected measures are needed, not all design data" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option B (Chapter 5 EDGE certification protocol) is incorrect, as this refers to the protocol document itself, not a submission component:
"The certification protocol is a reference, not part of the Auditor's submission" (EDGE Certification Protocol, Section 1.1: Overview). Option D (design audit site visit results) is incorrect, as site visits are not required at the design stage: "Preliminary Certification is based on a desk audit, not a site visit, which occurs at the post- construction stage" (EDGE Certification Protocol, Section 3.3: Certification Decision). Thus, compliance documents (Option C) are required in the submission.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.3: Certification Decision, Section 1.1: Overview.
NEW QUESTION # 21
EDGE methodology is NOT based on which of the following factors?
Answer: A
Explanation:
The EDGE methodology is designed to calculate resource savings using standardized inputs that reflect the building's context and design, rather than actual operational data. The EDGE Methodology Report outlines the factors used: "The EDGE methodology is based on climatic conditions of the location, building type and occupant use, and design and specifications. Climatic conditions determine heating and cooling loads, building type and occupant use define usage patterns (e.g., residential vs. hotel), and design and specifications include details like insulation levels, glazing properties, and system efficiencies" (EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach). Option A (climatic conditions of location), Option B (building type and occupant use), and Option C (design and specifications) are all integral to the methodology. However, Option D (electricity and water bills) is not a factor in EDGE calculations, as the methodology uses predictive modeling, not actual consumption data: "EDGE does not base its calculations on electricity and water bills, as these reflect operational performance rather than design potential. Instead, EDGE uses standardized assumptions about energy and water use based on building type, location, and design inputs" (EDGE User Guide, Section 2.1: EDGE Software Overview). The EDGE Methodology Report further clarifies: "Actual utility bills are not used in EDGE, as the software focuses on predicted savings at the design stage, not post-occupancy performance, except in cases like EDGE Zero Carbon certification where operational data is required" (EDGE Methodology Report Version 2.0, Section 2.2: Data Inputs). Since this question pertains to the general EDGE methodology (not Zero Carbon), electricity and water bills are not a factor. The EDGE User Guide also states: "The methodology relies on theoretical models to estimate resource use, ensuring consistency across projects, rather than variable operational data like utility bills" (EDGE User Guide, Section 2.3: Using the EDGE App). Thus, electricity and water bills (Option D) are not part of the EDGE methodology.
Reference:EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach, Section 2.2: Data Inputs; EDGE User Guide Version 2.1, Section 2.1: EDGE Software Overview, Section 2.3: Using the EDGE App.
NEW QUESTION # 22
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?
Answer: C
Explanation:
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
NEW QUESTION # 23
A building achieved EDGE certification three years ago and obtained 30% energy savings. Solar panels have been added, which increased the energy savings to 60%. If carbon offsets are purchased for the remainder of the energy use, when should an EDGE Zero Carbon certification application be filed?
Answer: B
Explanation:
EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: "To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status" (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building's energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: "EDGE Advanced is a prerequisite for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
"Operational data is required to verify performance for Zero Carbon certification" (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: "One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon" (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.
NEW QUESTION # 24
To maintain their licensed status, what must EDGE Auditors do?
Answer: B
Explanation:
EDGE Auditors must meet specific requirements to maintain their licensed status, ensuring they remain active and competent in their role. The EDGE Expert and Auditor Protocols provide detailed guidance: "To maintain their licensed status, EDGE Auditors must undertake at least one building project audit every two years. This requirement ensures that Auditors remain actively engaged in the certification process and maintain their practical experience in verifying EDGE projects" (EDGE Expert and Auditor Protocols, Section 5.1:
Maintaining Auditor Status). Option A, undertake at least one building project audit every two years, directly aligns with this requirement. Option B (attend refresher training for at least two hours every two years) and Option C (attend refresher training for at least two hours every three years) are incorrect, as the protocols specify a different training requirement: "EDGE Auditors must attend refresher training as required by IFC, typically every three years, but the duration is not specified as a minimum of two hours; the focus is on completing the training, not the exact hours" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). Option D (undertake at least one building project audit every three years) is also incorrect, as the required frequency is every two years, not three: "A three-year interval for audits does not meet the requirement of one audit every two years, which is necessary to ensure ongoing competence" (EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status). The EDGE User Guide supports this by stating: "Auditors maintain their status by conducting at least one audit every two years, ensuring they stay familiar with EDGE standards and procedures through active practice" (EDGE User Guide, Section 6.5:
Working with EDGE Auditors). Additionally, the protocols note: "Failure to conduct an audit within two years may result in a lapse of Auditor status, requiring recertification through additional training or re- examination" (EDGE Expert and Auditor Protocols, Section 5.2: Recertification Conditions). Thus, undertaking at least one audit every two years (Option A) is the correct requirement for maintaining EDGE Auditor status.
Reference:EDGE Expert and Auditor Protocols, Section 5.1: Maintaining Auditor Status, Section5.2:
Recertification Conditions; EDGE User Guide Version 2.1, Section 6.5: Working with EDGE Auditors.
NEW QUESTION # 25
......
If people buy and use the EDGE-Expert study materials with bad quality to prepare for their exams, it must do more harm than good for their exams, thus it can be seen that the good and suitable EDGE-Expert study materials is so important for peopleโ exam that people have to pay more attention to the study materials. In order to help people pass the exam and gain the certification, we are glad to the EDGE-Expert Study Materials from our company for you.
EDGE-Expert Frenquent Update: https://www.exams4collection.com/EDGE-Expert-latest-braindumps.html
What's more, part of that Exams4Collection EDGE-Expert dumps now are free: https://drive.google.com/open?id=1HS_azreu1F0NlVebaVJfqy3q_8XWDmm_