P.S. Free & New FlashArray-Storage-Professional dumps are available on Google Drive shared by PrepPDF: https://drive.google.com/open?id=1UJpQHcss6wpRXYtBGK5-dl2JGsFKDwDI
If you want to pass the FlashArray-Storage-Professional exam, you should buy our FlashArray-Storage-Professional exam questions to prapare for it. Our sincerity stems from the good quality of our FlashArray-Storage-Professional learning guide is that not only we will give you the most latest content. Also we will give you one year's free update of the FlashArray-Storage-Professional Study Materials you purchase and 24/7 online service. Now just make up your mind and get your FlashArray-Storage-Professional exam braindumps!
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
>> Test FlashArray-Storage-Professional Cram Review <<
We provide 3 versions for the client to choose and free update. Different version boosts different advantage and please read the introduction of each version carefully before your purchase. The language of our FlashArray-Storage-Professional study materials are easy to be understood and we compile the FlashArray-Storage-Professional Exam Torrent according to the latest development situation in the theory and the practice. You only need little time to prepare for our exam. So it is worthy for you to buy our FlashArray-Storage-Professional questions torrent.
NEW QUESTION # 17
What is indicated by the Fibre Channel (FC) hosts in the following output?
Answer: C
Explanation:
Purity Active/Active Architecture: Pure Storage FlashArrays use an Active/Active controller architecture. Under normal operating conditions, both controllers (CT0 and CT1) are healthy and independently serve I/O through their respective physical Fibre Channel ports.
The Scenario (Controller Failover): The output provided shows that the host initiator is seeing target WWNs associated with both CT0 and CT1, but the "Target" column indicates they are all being reached via the paths currently managed by one controller or through a specific failover mechanism.
Virtual WWNs and Transparency: In a controller failover or maintenance scenario, Pure Storage utilizes a feature where the WWNs of the "failed" or "offline" controller are logically moved to or presented by the "surviving" controller. This ensures that the host's MPIO (Multi-path I/O) software does not see a permanent "Path Down" error for those specific WWNs, but rather a transition.
Analyzing the Output: When you see CT1 port WWNs (e.g., 52:4A:93:78:55:2D:E3:10) appearing in the connectivity table in a way that implies they are being routed or presented through the physical infrastructure of CT0, it indicates that the array is in a state where one controller is assuming the identity/connectivity of the other. This is a key troubleshooting indicator that the array is likely undergoing a controller reboot, a Purity upgrade, or has experienced a controller hardware failure.
Why A and B are incorrect: * Option A: Multipathing software on the host handles path failures, but it wouldn't cause the array to report WWNs in this specific "cross-presented" manner in a connectivity log.
Option B: If there were a total outage on CT1 without this presentation mechanism, the paths would simply show as "Disconnected" or be missing from the initiator's view entirely.
NEW QUESTION # 18
A storage administrator is tasked with providing real-time data and alerts to the Network Operations Center (NOC) dashboard.
What source should the information come from to provide real-time data?
Answer: C
Explanation:
To provide true real-time data and alerts directly to a Network Operations Center (NOC) dashboard, the information must be sourced directly from the FlashArray. The FlashArray's Purity operating environment natively supports real-time data streaming and alerting integrations via protocols like Syslog, SNMP traps, and the local REST API. Polling the array directly or configuring it to push alerts guarantees that the NOC receives instantaneous, up-to-the-second notifications regarding array health, hardware faults, and performance metrics.
Here is why the other options are incorrect:
Pure1 (B): While Pure1 is Pure Storage's powerful, cloud-based monitoring and predictive analytics platform, it relies on phone-home telemetry data. This telemetry is batched and transmitted from the array to the Pure1 cloud on a short polling interval (typically a few minutes). Because of this transmission and processing interval, Pure1 provides near-real-time (lagging by a few minutes) and historical data. It is excellent for global fleet management and predictive support, but not for instantaneous, zero-latency NOC alerting.
Pure Performance Monitoring (A): This is a distractor. There is no standalone product or specific protocol in the Pure Storage ecosystem officially named "Pure Performance Monitoring." Performance monitoring is simply a feature accessed via the FlashArray GUI/CLI or the Pure1 platform.
NEW QUESTION # 19
Which command provides the negotiated port speed of an ethernet port?
Answer: A
Explanation:
On a Pure Storage FlashArray, Ethernet ports operate at both a physical hardware layer and a logical network configuration layer. If you need to verify the actual physical negotiated port speed of an Ethernet port (for example, verifying if a 25GbE port negotiated down to 10GbE due to switch configurations or cable limitations), you must query the hardware layer directly.
The command purehw list --all --type eth interacts directly with the physical NIC hardware components to report their true link status, health, and dynamically negotiated hardware link speed.
Here is why the other options are incorrect:
purenetwork eth list -- all (B): The purenetwork command suite is primarily focused on the logical Layer 2/Layer 3 networking stack. It is used to configure and list IP addresses, subnet masks, MTU sizes (Jumbo Frames), and routing, rather than focusing on the physical hardware negotiation details of the NIC itself.
pureport list (A): The pureport command suite is specifically used for managing and viewing storage protocol target ports. An administrator would use this to list the array's Fibre Channel WWNs or iSCSI IQNs to configure host zoning or initiator connections, not to verify Ethernet link negotiation speeds.
NEW QUESTION # 20
A storage administrator is troubleshooting multipathing issues.
What is the CLI command that allows the administrator to sample the I/O balance information at a consistent interval?
Answer: C
Explanation:
Command Purpose: The purehost monitor command is the primary tool in the Pure Storage CLI for observing real-time performance and connectivity health from the perspective of the hosts connected to the FlashArray.
The --balance Flag: When the --balance flag is added, the output shifts from general performance (IOPS, bandwidth, latency) to showing how I/O is distributed across the available paths (controllers and ports). This is critical for identifying "unbalanced" loads, which usually point to misconfigured MPIO (Multi-Path I/O) on the host side (e.g., a host only using one controller's ports).
Interval vs. Repeat:
The --interval flag specifies the time in seconds between each sample. In option C, --interval 15 tells the array to refresh the data every 15 seconds.
The --repeat flag (seen in option A) is used to limit the total number of samples taken before the command exits. However, in standard troubleshooting, the administrator typically wants a consistent stream of data until manually stopped (Ctrl+C).
--resample (seen in option B) is not a valid flag for the purehost monitor command in Purity.
Best Practice: When troubleshooting multipathing, Pure Storage recommends monitoring the balance to ensure that the "Relative I/O" percentage is roughly equal across all active paths. Large discrepancies often indicate that the host's MPIO policy is set to "Failover Only" instead of the recommended "Round Robin" or "Least Queue Depth."
NEW QUESTION # 21
If an NFS client can mount the FA File export shares with the IP address, but not the fully qualified domain name, what is most likely causing the issue?
Answer: B
Explanation:
When an NFS client successfully mounts an export using the target's IP address, it proves that the fundamental network connectivity (routing, firewalls) and the storage protocol layer (NFS export policies, host access permissions) are functioning correctly.
However, if the exact same mount attempt fails when using the Fully Qualified Domain Name (FQDN) of the FlashArray file service, the issue lies entirely with name resolution. The Domain Name System (DNS) is responsible for translating human-readable FQDNs into the IP addresses required for network communication. If the client cannot reach the DNS server, or if the DNS server lacks the correct A or AAAA records for the FlashArray's file Virtual IP (VIP) addresses, the client won't be able to resolve the name to the IP, causing the mount command to fail.
Here is why the other options are incorrect:
Issue with the Active Directory (AD) controller (A): Active Directory is primarily used for directory services, user authentication, and authorization (such as mapping permissions for SMB or NFSv4). While AD environments usually include DNS, an "AD controller issue" in the context of storage protocols usually points to permission denials, not host name resolution failures. Furthermore, since the mount works via IP, basic access is already validated.
Issue with the OpenLDAP (C): Similar to AD, OpenLDAP provides directory services for user mappings (UID/GID) and authentication. It does not perform FQDN-to-IP resolution.
NEW QUESTION # 22
......
If you want to be the talent the society actually needs you must apply your knowledge into the practical working and passing the test FlashArray-Storage-Professional certification can make you become the talent the society needs. If you buy our FlashArray-Storage-Professional study materials you will pass the exam successfully and realize your goal to be the talent. We have been in this career for over ten years and we have been the leader in the market. Our FlashArray-Storage-Professional Exam Question are always the latest and valid for you to pass the exam.
FlashArray-Storage-Professional Valid Exam Topics: https://www.preppdf.com/Pure-Storage/FlashArray-Storage-Professional-prepaway-exam-dumps.html
P.S. Free & New FlashArray-Storage-Professional dumps are available on Google Drive shared by PrepPDF: https://drive.google.com/open?id=1UJpQHcss6wpRXYtBGK5-dl2JGsFKDwDI