Our valid NSE6_FNC_AD-7.6 exam dumps will provide you with free dumps demo with accurate answers that based on the real exam. These NSE6_FNC_AD-7.6 real questions and answers contain the latest knowledge points and the requirement of the certification exam. High quality and accurate of NSE6_FNC_AD-7.6 Pass Guide will be 100% guarantee to clear your test and get the certification with less time and effort.
| Section | Objectives |
|---|---|
| Concepts and Initial Configuration | - Explain isolation networks and the configuration wizard - Model and organize infrastructure devices |
| Integration | - Configure and use FortiNAC-F Manager - Integrate with third-party devices using Syslog and SNMP trap input - Explain and configure MDM integration |
| Deployment and Provisioning | - Configure FortiNAC-F security policies - Configure access control on FortiNAC-F - Configure security automation - Configure and monitor high availability (HA) |
| Network Visibility and Monitoring | - Use logging options available on FortiNAC - Troubleshoot network devices and device status - Guests and contractors - Explain and configure device profiling |
>> Practice NSE6_FNC_AD-7.6 Exams Free <<
As you all know that the Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam is the most challenging exam, since it's difficult to find preparation material for passing the Fortinet NSE6_FNC_AD-7.6 exam. Test4Engine provides you with the most complete and comprehensive preparation material for the Fortinet NSE6_FNC_AD-7.6 Exam that will thoroughly prepare you to attempt the NSE6_FNC_AD-7.6 exam and pass it with 100% success guaranteed.
NEW QUESTION # 24
Refer to the exhibit.
Given this topology, and a layer 3 registration network configuration, which IP address would be designated in the DHCP relay configuration for the registration network?
Answer: C
Explanation:
The correct answer is D . In a Layer 3 registration or isolation network design, DHCP requests from the isolated registration VLAN are not served locally on that VLAN by a normal production DHCP server.
Instead, the registration VLAN's DHCP relay must forward DHCP traffic to FortiNAC-F port2 , because port2 is the captive network service interface. The study guide states that in Layer 3 captive networks, DHCP traffic is relayed to port2 from the captive networks, and that the FortiNAC-F port2 interface provides DHCP, DNS, and captive portal services for hosts assigned to those captive networks.
In the exhibit, the registration VLAN is 192.168.10.x/24 , with gateway 192.168.10.254 . That gateway is where the DHCP relay would be configured, but it is not the relay destination. The relay destination must be the FortiNAC-F port2 address, shown as 192.168.200.10 . The corporate DHCP server 192.168.100.75 is for production network addressing, not registration isolation. The FortiNAC-F port1 address 192.168.100.20 is the administrative or production-facing interface, not the captive network service interface. Therefore, the DHCP relay should point to 192.168.200.10 .
NEW QUESTION # 25
An administrator wants to build device profiling rules based on network traffic, but the network session view is not populated with any records.
Which two settings can be enabled to gather network session information? (Choose two.)
Answer: B,D
Explanation:
In FortiNAC-F, the Network Sessions view provides a real-time and historical log of traffic flows, including source/destination IP addresses, ports, and protocols. This data is essential for building Device Profiling Rules that rely on "Traffic Patterns" or "Network Footprints" to identify devices (e.g., an IP camera communicating with its specific NVR). If the network session view is empty, the system is not receiving the necessary flow or session data from the network infrastructure.
According to the FortiNAC-F Administration Guide, there are two primary methods to populate this view:
NetFlow/sFlow/IPFIX (C): FortiNAC-F can act as a flow collector. By enabling NetFlow settings on the FortiNAC-F service interface (port2/eth1) and configuring your switches or routers to export flow data to the FortiNAC IP, the system can parse these packets and record sessions.
Firewall Session Polling (B): For environments with FortiGate firewalls, FortiNAC-F can proactively poll the FortiGate via the REST API to retrieve its current session table. This is particularly useful as it provides session visibility without requiring the overhead of configuring NetFlow on every access layer switch.
NEW QUESTION # 26
An administrator is configuring FortiNAC-F to manage FortiGate VPN users. As part of the configuration, the administrator must configure a few FortiGate firewall policies. What is the purpose of the FortiGate firewall policy that applies to clients not yet authorized by FortiNAC-F? (Choose one answer)
Answer: A
Explanation:
The firewall policy for an unauthorized VPN host is an isolation policy. When a remote endpoint first establishes its VPN tunnel, FortiGate assigns the client an IP address plus two DNS servers: the production DNS server as primary and the FortiNAC-F Port2 VPN-context address as secondary . Until FortiNAC-F validates the endpoint, FortiGate firewall policies restrict the client ' s traffic so that it can communicate only with the FortiNAC-F Port2 VPN interface .
This restriction deliberately prevents access to the primary production DNS server. Consequently, DNS resolution against the primary server fails and the endpoint falls back to the secondary DNS server- FortiNAC-F. FortiNAC-F then resolves the request toward its VPN isolation interface and presents the VPN captive portal . The user can subsequently run or download the required FortiNAC-F agent, allowing FortiNAC-F to perform identification and endpoint-compliance validation.
After successful authorization, FortiNAC-F sends the appropriate group/tag information to FortiGate, causing the host to match a different firewall policy that permits the required production resources and blocks the isolation interface.
Study Guide Reference: Advanced Features # FortiGate VPN Integration # VPN Host Isolation and Firewall Policies , pp. 346-354 .
NEW QUESTION # 27
Refer to the exhibit.
Which devices are automatically evaluated by these device profiling rules?
Answer: A
Explanation:
The correct answer is A . In FortiNAC-F, device profiling rules are used primarily to classify unknown or untrusted devices when they are first discovered. The study guide explains that when a device does not already exist in the database, FortiNAC-F adds it, treats it as a rogue, and evaluates it against enabled device profiling rules. It also states that devices are initially evaluated against device profiling rules only if they do not already exist in the database, because this avoids unnecessary repeated evaluation of known devices.
The exhibit also matters: the rules are enabled and set to Automatic registration, but Confirm Rule On Connect is not enabled and Confirm Rule Interval is set to None . That means FortiNAC-F will not automatically revalidate already-profiled or trusted devices every time they connect. Option B is wrong because trusted devices are not repeatedly evaluated unless rule confirmation is configured. Option C is too broad because all hosts are not processed through profiling rules on every connection. Option D is also wrong because changing location does not by itself force automatic device profiling; location can be used as a rule method, but the automatic evaluation described here applies when the rogue device is initially added to the database.
NEW QUESTION # 28
What must an administrator configure to allow FortiNAC-F to process incoming syslog messages that are not supported by default?
Answer: A
Explanation:
FortiNAC-F provides a robust engine for processing security notifications from third-party devices.
For standard integrations, such as FortiGate or Check Point, the system comes pre-loaded with templates to interpret incoming data. However, when an administrator needs FortiNAC-F to process syslog messages from a vendor or device that is not supported by default, they must configure a Security Event Parser.
The Security Event Parser acts as the translation layer. It uses regular expressions (Regex) or specific field mappings to identify key data points within a raw syslog string, such as the source IP address, the threat type, and the severity. Without a parser, FortiNAC-F may receive the syslog message but will be unable to "understand" its contents, meaning it cannot generate the necessary Security Event required to trigger automated responses. Once a parser is created, the system can extract the host's IP address from the message, resolve it to a MAC address via L3 polling, and then apply the appropriate security rules. This allows for the integration of any security appliance capable of sending RFC-compliant syslog messages.
"FortiNAC parses the information based on pre-defined security event parsers stored in FortiNAC's database... If the incoming message format is not recognized, a new Security Event Parser must be created to define how the system should extract data fields from the raw syslog message. This enables FortiNAC to generate a security event and take action based on the alarm configuration."
NEW QUESTION # 29
......
The Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) exam dumps are real and updated NSE6_FNC_AD-7.6 exam questions that are verified by subject matter experts. They work closely and check all NSE6_FNC_AD-7.6 exam dumps one by one. They maintain and ensure the top standard of Test4Engine NSE6_FNC_AD-7.6 Exam Questions all the time. The NSE6_FNC_AD-7.6 practice test is being offered in three different formats. These NSE6_FNC_AD-7.6 exam questions formats are PDF dumps files, web-based practice test software, and desktop practice test software.
Latest NSE6_FNC_AD-7.6 Exam Pass4sure: https://www.test4engine.com/NSE6_FNC_AD-7.6_exam-latest-braindumps.html