At this time, you will stand out in the interview among other candidates with the SRAN-Radio-Network-Performance-Optimization certification. Constant improvement is significant to your career development. Your current achievements cannot represent your future success. Never stop advancing. Come to study our SRAN-Radio-Network-Performance-Optimization Learning Materials. Stick to the end, victory is at hand. Action always speaks louder than words. With the help of our SRAN-Radio-Network-Performance-Optimization study questions, you can reach your dream in the least time.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Quality of Service and Resource Management | 15% | - QoS parameters, scheduling and admission control - Radio resource management and optimization |
| Topic 2: SRAN Performance Optimization Fundamentals | 25% | - Key performance indicators (KPIs) definition and measurement - Network performance monitoring and analysis tools - Performance optimization principles and methodology |
| Topic 3: Coverage and Capacity Optimization | 30% | - Capacity planning, load balancing and optimization - Interference analysis and mitigation techniques - Coverage analysis, tuning and optimization |
| Topic 4: Mobility and Handover Optimization | 20% | - Inter-RAT mobility and optimization - Handover parameters and algorithms - Mobility robustness and optimization |
| Topic 5: Advanced Optimization and SON Features | 10% | - Self-Organizing Networks (SON) use cases and optimization - Energy saving and advanced features |
>> Nokia SRAN-Radio-Network-Performance-Optimization Valid Study Plan <<
Many people may have different ways and focus of study to pass SRAN-Radio-Network-Performance-Optimization exam in the different time intervals, but we will find that in real life, can take quite a long time to learn SRAN-Radio-Network-Performance-Optimization learning questions to be extremely difficult. You may be taken up with all kind of affairs, and sometimes you have to put down something and deal with the other matters for the latter is more urgent and need to be done immediately. With the help of our SRAN-Radio-Network-Performance-Optimization training guide, your dream won’t be delayed anymore.
NEW QUESTION # 13
What is the role of admission control in 5G networks ?
Answer: D
Explanation:
The correct answer is D .
Admission control is responsible for deciding whether a new UE connection, bearer, service, or session can be accepted by the cell without negatively affecting existing users and services.
In 5G RAN, admission control checks available radio resources such as:
* PRB availability
* PDCCH/PUCCH capacity
* UE context capacity
* QoS requirements
* GBR or non-GBR bearer requirements
* Cell load and congestion status
It does not directly manage modulation schemes; that is handled by link adaptation. It also does not directly increase spectral efficiency or optimize downlink throughput, although good admission control indirectly protects user experience and avoids overload.
So the main role of admission control is:
To check whether there are enough resources for new connections.
NEW QUESTION # 14
Single Network Slice Selection Assistance Information , or S-NSSAI , identifies a network slice. Which of the following statements are correct regarding NSSAI ? Refer to the diagram for basic information.
Answer: F
Explanation:
The correct answer is D: A, B, C, and D .
In 5G network slicing, S-NSSAI identifies a single network slice. It is composed of:
SST , or Slice/Service Type
SD , or Slice Differentiator
Statement A is correct.
The combination of SST + SD can uniquely identify a slice. For example, two slices may both use SST 1 for eMBB/MBB-type service, but different SD values can separate them for different enterprises, tenants, or service groups.
Statement B is correct.
SST is mandatory. It is an 8-bit numeric field that indicates the expected slice/service behavior, such as eMBB, URLLC, or mMTC.
Statement C is correct.
SD is optional. It is a 24-bit field used to differentiate multiple slices that may share the same SST.
Statement D is correct.
SST may use standardized values, such as SST 1 for eMBB, SST 2 for URLLC, and SST 3 for mMTC/MIoT.
It may also use operator-specific or non-standardized values depending on deployment requirements.
NEW QUESTION # 15
In NR SA Option 2, the UE is camped on an SA serving cell. An IRAT handover is triggered for a multi-QCI call, QCI 1 and QCI 6, due to weak coverage of the serving cell. What will happen to both QCIs during the IRAT handover toward LTE?
Answer: D
Explanation:
The correct answer is D.
In 5G SA Option 2, NR works independently with the 5G Core, but interworking with LTE/EPC can be supported for mobility continuity. When IRAT handover toward LTE is triggered due to weak NR coverage, the goal is to preserve the active services during mobility.
For a multi-QCI service:
QCI 1 normally represents the voice bearer, such as VoLTE/IMS voice continuity after movement to LTE.
QCI 6 normally represents a non-GBR data bearer.
During a supported IRAT handover from NR SA to LTE, both the voice bearer and data bearer can be transferred to LTE, assuming proper interworking, bearer mapping, and LTE coverage availability.
Option C is incorrect because IRAT mobility from NR SA to LTE is supported in properly configured networks. Option A is incorrect because the voice bearer is the most critical bearer to preserve. Option B is also not the best answer because the data bearer does not necessarily need to be released during IRAT handover.
Therefore, the expected result is:
Both QCI 1 voice and QCI 6 data continue on LTE.
NEW QUESTION # 16
In the context of radio capacity management , what is the significance of Scheduling Request periodicity ?
Answer: C
Explanation:
The correct answer is C .
Scheduling Request , or SR , is used by the UE to request uplink resources when it has uplink data to send.
The SR periodicity defines how often the UE gets an opportunity to send this scheduling request.
A shorter SR periodicity means the UE can request uplink resources more quickly, which improves uplink latency. However, it consumes more PUCCH/control-channel resources, reducing the number of UEs that can be efficiently supported.
A longer SR periodicity saves control-channel resources and can support more connected users, but it increases uplink access delay.
Therefore, SR periodicity is important because it creates a trade-off between:
Lower latency and higher connected-user capacity.
NEW QUESTION # 17
In the context of mmWave deployments , what is the primary benefit of analog beamforming ?
Answer: B
Explanation:
The correct answer is A .
In mmWave systems, beamforming is essential because FR2 signals suffer from high path loss and blockage.
Analog beamforming uses fewer RF chains than fully digital beamforming, so it is cheaper and less complex in terms of RF hardware, power consumption, and implementation. Research and industry references explain that analog and hybrid beamforming architectures reduce the number of required ADCs/RF chains compared with fully digital beamforming, lowering cost and power complexity.
However, analog beamforming has limitations. It usually forms one beam, or a limited number of beams, at a time from a panel. Supporting multiple independent simultaneous beams and more UEs per sector is more associated with digital or hybrid beamforming, not pure analog beamforming.
Therefore, the primary benefit is:
Low cost and low complexity for coverage at higher mmWave bands.
NEW QUESTION # 18
......
Actual4Exams MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) practice material can be accessed instantly after purchase, so you won't have to face any excessive issues for preparation of your desired SRAN-Radio-Network-Performance-Optimization certification exam. The SRAN-Radio-Network-Performance-Optimization Exam Dumps of Actual4Exams has been made after seeking advice from many professionals. Our objective is to provide you with the best learning material to clear the MN: NCSS NPS - SRAN Radio Network Performance Optimization Certification Exam | GS40-NPS-SRPER-E-S03-2510 (SRAN-Radio-Network-Performance-Optimization) exam.
SRAN-Radio-Network-Performance-Optimization Exam Blueprint: https://www.actual4exams.com/SRAN-Radio-Network-Performance-Optimization-valid-dump.html