P.S. Free & New EDGE-Expert dumps are available on Google Drive shared by ActualVCE: https://drive.google.com/open?id=1nS_UoOSReDQhKB186s25nh7dePhSeO4D
Our EDGE-Expert learning guide is very efficient tool in the world. As is known to us, in our modern world, everyone is looking for to do things faster, better, smarter, so it is no wonder that productivity hacks are incredibly popular. So we must be aware of the importance of the study tool. In order to promote the learning efficiency of our customers, our EDGE-Expert Training Materials were designed by a lot of experts from our company. You can totally rely on our EDGE-Expert study materials.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: EDGE System Overview | 15% | - Building Types & Applicability
|
| Topic 2: Water Efficiency & Materials | 25% | - Water Demand
|
| Topic 3: Financial & Results Analysis | 10% | - Results and outputs of EDGE
|
| Topic 4: Energy Efficiency | 25% | - Energy Consumption
|
| Topic 5: Software & Methodology | 25% | - Baseline & Proposed Building Models
|
>> EDGE EDGE-Expert Test Centres <<
Under the help of our EDGE-Expert exam questions, the pass rate among our customers has reached as high as 98% to 100%. We are look forward to become your learning partner in the near future. As we all know, to make something right, the most important thing is that you have to find the right tool. Our EDGE-Expert study quiz is the exact study tool to help you pass the EDGE-Expert exam by your first attempt.
NEW QUESTION # 61
Increasing the glazing area of an office building will NOT impact which of the following?
Answer: C
Explanation:
Increasing the glazing area in an office building affects various aspects of energy consumption due to changes in heat gain, heat loss, and natural light availability, but it does not influence all buildingsystems. The EDGE User Guide explains the impacts of glazing: "Increasing the glazing area (window-to-wall ratio, WWR) in an office building typically increases cooling demand due to higher solar heat gain, increases heating demand in colder climates due to greater heat loss through windows, and reduces lighting energy by allowing more natural daylight, assuming proper daylighting design" (EDGE User Guide, Section 3.5: Passive Design Strategies). Option A (cooling demand) is affected, as more glazing increases solar heat gain: "Higher WWR leads to greater cooling loads in hot climates due to increased solar radiation entering the building" (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). Option B (heating demand) is also impacted, particularly in cooler climates: "Larger glazing areas increase heat loss in cold climates, raising heating demand due to the lower thermal resistance of windows compared to walls" (EDGE User Guide, Section 4.1: Insulation Measures). Option C (lighting energy) is affected, as more glazing can reduce the need for artificial lighting: "Increased glazing can lower lighting energy by enhancing daylight penetration, provided glare is controlled" (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). However, Option D (hot water demand) is not impacted by glazing area, as hot water use is tied to occupant activities (e.
g., showers, cleaning) rather than building envelope design: "Hot water demand in EDGE is determined by occupant use patterns, such as the number of showers or laundry cycles, and is not influenced by glazing area or WWR" (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). The EDGE User Guide further confirms: "Glazing area impacts energy-related metrics like cooling, heating, and lighting, but has no direct effect on hot water demand, which is calculated separately based on usage assumptions" (EDGE User Guide, Section 5.2: Water Efficiency Measures). Therefore, increasing glazing area does not impact hot water demand (Option D).
Reference:EDGE User Guide Version 2.1, Section 3.5: Passive Design Strategies, Section 4.1: Insulation Measures, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods, Section 4.2: Water Savings Calculations.
NEW QUESTION # 62
To claim efficiency measure Insulation for Cold Storage Envelope, which of the following documents is required as evidence at the preliminary certification stage?
Answer: C
Explanation:
The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: "For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure's requirements. The U-value must be lower than the Base Case to qualify for savings" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
"COP is used for chillers, not insulation measures" (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer's data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: "HVAC documentation is not required for insulation measures" (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: "Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification" (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.
NEW QUESTION # 63
The EDGE definition of a green building is a building that uses less resources quantified as
Answer: D
Explanation:
According to the CBCI EDGE curriculum, the foundational definition of an EDGE Certified green building is one that achieves a minimum of 20 percent savings in energy, 20 percent savings in water, and 20 percent reduction in embodied carbon in materials when compared to a local baseline or benchmark defined within the EDGE software. This local benchmark reflects standard building practices, climatic conditions, and typical construction methods for the specific country where the project is located.
The 20-20-20 threshold represents the minimum performance requirement for achieving EDGE Certified status. Higher performance levels, such as EDGE Advanced, require at least 40 percent energy savings but still maintain the 20 percent thresholds for water and materials. Therefore, option B reflects the requirement for EDGE Advanced, not the base definition of a green building under EDGE.
Option C is incorrect because EDGE comparisons are always made against a locally defined baseline, not buildings in other countries. Option D is incorrect because EDGE evaluates embodied carbon in materials, not waste reduction as a core certification metric. Therefore, the correct definition aligns with option A.e, the user type that has access to the Share Subproject function is the Owner.
NEW QUESTION # 64
Which of the following building types is NOT covered by EDGE?
Answer: C
Explanation:
EDGE certification applies to specific building typologies that align with its focus on resource efficiency in new constructions and major renovations. The EDGE User Guide lists the covered building types: "EDGE certification is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. These typologies are selected because they have predictable energy, water, and materials usage patterns that can be modeled in the EDGE software" (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option A (hospitals), Option B (schools), and Option D (warehouses) are explicitly included in this list, making them eligible for EDGE certification. However, Option C (factories - heavy industry) is not covered, as clarified in the EDGE Certification Protocol: "Heavy industry factories are not covered by EDGE, as their energy and water usage patterns are highly variable and process-driven, making them unsuitable for the standardized modeling approach used in EDGE. Light industry buildings, such as small manufacturing facilities with predictable usage, are included, but heavy industry, such as steel production or chemical manufacturing, is excluded" (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE Methodology Report further explains: "Heavy industry factories involve complex industrial processes that dominate resource consumption, which cannot be accurately modeled using EDGE's simplified methodology, unlike hospitals, schools, or warehouses, which have more consistent occupancy and usage patterns" (EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach). The EDGE User Guide also notes: "Building types like heavy industry factories are outside the scope of EDGE, as the software is designed for commercial and residential buildings with typical HVAC, lighting, and water demands" (EDGE User Guide, Section 1.2: Scope of EDGE Certification).
Therefore, factories (heavy industry) (Option C) is the building type not covered by EDGE.
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard; EDGE Methodology Report Version 2.0, Section 2.1:
Calculation Approach.
NEW QUESTION # 65
The Base Case for utility costs:
Answer: A
Explanation:
In EDGE, the Base Case is a standardized benchmark used to calculate utility cost savings, reflecting typical resource consumption for a building in its location and typology. The term "virtual energy" in EDGE refers to the energy required for heating, cooling, lighting, and other systems, modeled as if the building operates under typical conditions without efficiency measures. The EDGE User Guide explains how utility costs are calculated: "The Base Case for utility costs includes the cost of virtual energy, which represents the modeled energy consumption for the building type in the absence of efficiency measures, alongside water consumption, using localtariffs to estimate financial impacts" (EDGE User Guide, Section 2.3: Using the EDGE App). Option B, includes the cost of virtual energy, aligns with this approach, as the Base Case accounts for all modeled energy use to establish a baseline for savings. Option A (excludes the cost of virtual energy) is incorrect, as virtual energy is a core component of the Base Case: "Virtual energy in EDGE is the theoretical energy use calculated for the Base Case, including heating, cooling, and lighting, and its cost is always included in utility cost calculations" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). Option C (excludes the cost of virtual energy only in homes) and Option D (includes the cost of virtual energy only in homes) are also incorrect, as the treatment of virtual energy is consistent across all typologies: "The Base Case methodology, including the inclusion of virtual energy costs, applies uniformly to all building types in EDGE, whether homes, hotels, or offices, to ensure a fair comparison of savings" (EDGE User Guide, Section 2.3: Using the EDGE App). The EDGE Methodology Report further clarifies: "Utility costs in the Base Case are derived from virtual energy and water consumption, reflecting typical usage patterns for the building type and location, ensuring that savings calculations are comprehensive and include all relevant energy demands" (EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations). This consistent inclusion of virtual energy costs across all typologies makes Option B the correct answer.
Reference:EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 4.4: Cost Savings Calculations.
NEW QUESTION # 66
......
When we choose the employment work, you will meet a bottleneck, how to let a company to choose you to be a part of him? We would say ability, so how does that show up? There seems to be only one quantifiable standard to help us get a more competitive job, which is to get the test EDGE-Expertcertification and obtain a qualification. If you want to have a good employment platform, then take office at the same time there is a great place to find that we have to pay attention to the importance of qualification examination.
Exam EDGE-Expert Pattern: https://www.actualvce.com/EDGE/EDGE-Expert-valid-vce-dumps.html
DOWNLOAD the newest ActualVCE EDGE-Expert PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1nS_UoOSReDQhKB186s25nh7dePhSeO4D