The passing rate of our AZ-802 study materials is the issue the client mostly care about and we can promise to the client that the passing rate of our product is 99% and the hit rate is also high. Our AZ-802 study materials are selected strictly based on the real AZ-802 exam and refer to the exam papers in the past years. Our expert team devotes a lot of efforts on them and guarantees that each answer and question is useful and valuable. We also update frequently to guarantee that the client can get more AZ-802 learning resources and follow the trend of the times. So if you use our study materials you will pass the test with high success probability.
| Section | Objectives |
|---|---|
| Topic 1: Implement and manage high availability | - Load balancing and redundancy
|
| Topic 2: Networking and storage infrastructure | - Storage management
|
| Topic 3: Disaster recovery and migration | - Backup and restore
|
| Topic 4: Secure Windows Server hybrid infrastructures | - Security configuration
|
| Topic 5: Monitoring and troubleshooting | - System monitoring
|
| Topic 6: Manage hybrid compute and virtualization | - Virtual machines
|
Our qualified team of Microsoft Administering Windows Server study material to improve the quality and to match the changes in the syllabus and pattern shared by AZ-802.ย Our desktop Microsoft AZ-802 Practice Exam software is designed for all those candidates who want to learn and practice in the actual Microsoft AZ-802 exam environment.
NEW QUESTION # 365
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains servers that run Windows Server and store BitLocker recovery keys in AD DS. A server named Server1 starts in BitLocker recovery mode. You need to identify the BitLocker recovery key for Server1. Solution: You run repair-bde.exe by using a BitLocker key package exported from AD DS. Does this meet the goal?
Answer: B
Explanation:
repair-bde.exe is a disk-repair utility, not a lookup or reporting tool: its purpose is to attempt to decrypt or repair a corrupted BitLocker-protected volume when normal unlock methods have failed, and it accepts either a recovery password or a previously exported BitLocker key package (a file containing the actual encryption keys needed to decrypt sectors directly) as the credential it uses to perform that repair; running it does not display, output, or otherwise identify the volume ' s 48-digit numerical recovery password value to the administrator at all, and a key package is a different artifact from the recovery password that would actually need to be entered at Server1 ' s BitLocker recovery screen to unlock it through the normal recovery workflow. The stated goal is specifically to identify the recovery key, meaning to determine and retrieve its value, not to repair or decrypt a damaged volume using key material that must already have been exported in advance; even successfully running repair-bde with an exported key package would leave the administrator no closer to knowing what Server1 ' s recovery password actually is, and it does nothing to address a server that is simply sitting at the BitLocker recovery prompt waiting for a password rather than suffering from actual volume corruption. Because this solution does not retrieve or display the recovery key, it does not meet the stated goal.
NEW QUESTION # 366
Your network contains an Active Directory Domain Services (AD DS) domain. The domain contains a user named User1. User1 is a member of a group named Group1 and is in an organizational unit (OU) named OU1. The domain has minimum password lengths configured as follows: Default Domain Policy = 10; Default Domain Controllers Policy = 12; Group Policy linked to OU1 = 8; Password Settings Object (PSO) applied to Group1 = 14; Password Settings Object (PSO) applied directly to User1 = 7. What is the minimum password length that User1 should use when changing to a new password?
Minimum password length values by policy source
Answer: E
Explanation:
Fine-grained password policies, delivered through Password Settings Objects (PSOs), always take precedence over the domain-wide default password policy for any user or group they are applied to, and Microsoft ' s documented resolution algorithm for a user with more than one potentially applicable PSO is specific: a PSO linked directly to the user object always wins over any PSO that would otherwise apply only through group membership, regardless of the precedence values involved. Because User1 has a PSO applied directly to it (minimum length 7), that PSO governs User1 ' s password requirement outright, overriding the PSO applied via Group1 membership (14) entirely -- the Group1 PSO would only matter for User1 if no PSO were linked directly to User1. The GPO linked to OU1 (minimum length 8) is irrelevant regardless, since Account Policy settings (password policy) configured in an OU-linked GPO never affect the password policy of domain user accounts -- only the GPO linked at the domain root (Default Domain Policy, minimum length 10) would apply as a fallback domain-wide default, and only in the complete absence of any applicable PSO. The Default Domain Controllers Policy ' s setting (12) governs an entirely separate GPO scope (domain controller computer accounts) and is not relevant to a regular domain user ' s password requirement at all. Since a directly-linked PSO exists for User1, its value of 7 is what actually applies.
NEW QUESTION # 367
You need to configure BitLocker on Server4.
On which volumes can you turn on BitLocker, and on which volumes can you turn on auto-unlock? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
BitLocker: C, D, E, and F. Auto-unlock: D, E, and F only.
BitLocker Drive Encryption can be enabled on every volume shown in Server4 ' s disk configuration -- the NTFS-formatted operating system volume (C:), the NTFS data volume (D:), and the two ReFS-formatted data volumes (E: and F:). BitLocker has no file-system restriction that excludes ReFS: Microsoft ' s ReFS documentation and BitLocker ' s own volume support explicitly confirm that ReFS-formatted volumes, including already-encrypted ones that are later expanded, are fully supported, so E: and F: are just as eligible for BitLocker as the NTFS volumes. BitLocker auto-unlock, however, is a feature limited to fixed data volumes: it lets a data volume unlock automatically at startup using a key protected by the already-unlocked operating system volume, and it is not applicable to the OS volume itself, since the OS volume instead relies on the TPM (or a startup key/PIN) to unlock during boot -- there is no separate outer volume for it to depend on. Because C: is the operating system volume, auto-unlock cannot be configured on it, leaving D:, E:, and F:
as the volumes eligible for auto-unlock. Therefore, BitLocker can be turned on for all four volumes (C, D, E, and F), while auto-unlock is available only on the three data volumes (D, E, and F).
NEW QUESTION # 368
Your network contains an Active Directory Domain Services (AD DS) domain named contoso.com.
You need to perform the following tasks:
* Createasnapshotofcontoso.com.
* Expose the snapshot as a read-only AD DS instance.
What should you use for each task? To answer, drag the appropriate tools to the correct tasks. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Exhibit
Answer:
Explanation:
Explanation:
Ntdsutil.exe is the built-in tool used to create and manage Active Directory Domain Services snapshots, which are point-in-time, volume-shadow-copy-based captures of the AD database that can be taken without stopping the domain controller. Dsamain.exe then mounts one of those snapshots and exposes its contents as a read-only LDAP directory on a separate port, letting an administrator browse, compare, or recover objects from the earlier point in time without performing an authoritative restore. This snapshot-and-mount workflow is the standard low-impact way to inspect prior AD DS state for recovery purposes. Active Directory Administrative Center and Active Directory Users and Computers can browse and compare objects once dsamain.exe has exposed the snapshot as an LDAP endpoint, but neither tool creates the snapshot itself or mounts it as a directory instance, which is why ntdsutil.exe and dsamain.exe are the two tools that must be matched to these specific tasks. Dsmgmt.exe, the fifth tool in the list, is used for different administrative operations such as managing FSMO role seizure or DSRM password resets, and plays no part in the snapshot creation or exposure workflow being tested here.
NEW QUESTION # 369
Your network contains the segments shown in the following table.
You have servers that run Windows Server and are configured as shown in the following table.
You deploy a server named Server4 that runs Windows Server and has a static IP address of 172.16.1.1. You connect Server4 to Segment1.
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Server1 can successfully ping Server2 by using the name of Server2: No. Server2 can successfully ping Server3 by using the IP address of Server3: No. Running ipconfig /all on Server4 will display an IP address from the 169.254.0.0/16 IPv4 address space: No.
A host decides whether a destination is local by comparing the destination IP against its own subnet mask; if the destination falls outside its own subnet, the host forwards through its default gateway, and if within its own subnet, it uses ARP directly on the local segment. Server2 is physically cabled to Segment1 but has been configured with an IP address (172.16.2.2/24) that places it in the 172.16.2.0/24 network -- a subnet that is physically Segment2. When Server1 (172.16.1.10/24) resolves and pings Server2 ' s name, it gets back
172.16.2.2, which Server1 treats as a remote address (outside its own 172.16.1.0/24) and forwards to its gateway, 172.16.1.1; the router then forwards toward the 172.16.2.0/24 network (physically Segment2), where Server2 is not actually present, so the ping fails. Likewise, when Server2 (believing itself to be on
172.16.2.0/24) tries to reach Server3 (172.16.2.20), it thinks the destination is local and issues an ARP request on the wire it ' s actually attached to (Segment1); ARP requests never cross a router, so the request never reaches Server3 (physically on Segment2), and the ping fails. Server4 was given a static IP address (172.16.1.1); APIPA (169.254.0.0/16) is assigned only to interfaces configured for automatic (DHCP) addressing when no DHCP server responds -- a statically configured interface never receives an APIPA address regardless of any conflict, so ipconfig /all on Server4 will show its configured static address,
172.16.1.1 (which incidentally also collides with Segment1 ' s gateway address, a separate misconfiguration), not an APIPA address.
NEW QUESTION # 370
......
Getting the Administering Windows Server (AZ-802) certification will highly expand your expertise. To achieve the AZ-802 certification you need to prepare well. AZ-802 exam dumps are a great way to assess your skills and abilities. AZ-802 Questions can help you identify your strengths and weaknesses and better understand what you're good at. You should take a AZ-802 Practice Exam to prepare for the Administering Windows Server (AZ-802) certification exam. With AZ-802 exam preparation software, you can practice your skills and improve your performance.
AZ-802 Valid Exam Preparation: https://www.prep4sureexam.com/AZ-802-dumps-torrent.html