2026 Latest Lead1Pass JN0-364 PDF Dumps and JN0-364 Exam Engine Free Share: https://drive.google.com/open?id=1gI5TYULWrio7SqSNKefAYIo69J39lTjJ
Our JN0-364 test torrent keep a look out for new ways to help you approach challenges and succeed in passing the JN0-364 exam. And our JN0-364 qualification test are being concentrated on for a long time and have accumulated mass resources and experience in designing study materials. There is plenty of skilled and motivated staff to help you obtain the JN0-364 Exam certificate that you are looking forward. We have faith in our professional team and our JN0-364 study tool, and we also wish you trust us wholeheartedly.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Intermediate System to Intermediate System (IS-IS) | 10-15% | - Configuration and monitoring - PDUs and TLVs - Adjacencies and levels - Metrics and wide metrics |
| Topic 2: Open Shortest Path First (OSPF) | 15-20% | - LSA types and operation - Configuration and troubleshooting - Link-state database - Areas and router types |
| Topic 3: Layer 2 Bridging and VLANs | 8-12% | - Service provider switching features - Bridging concepts - VLANs and trunking |
| Topic 4: High Availability | 5-8% | - Nonstop active routing - NSR and GRES concepts - Graceful restart |
| Topic 5: Protocol-Independent Routing | 10-15% | - Static, aggregate, and generated routes - Filter-based forwarding - Martian addresses - Load balancing - Routing instances and RIB groups |
| Topic 6: Spanning Tree Protocols | 8-12% | - Configuration and convergence - Port roles and states - STP, RSTP, MSTP, VSTP - BPDU and protection features |
| Topic 7: Multiprotocol Label Switching (MPLS) | 12-18% | - Configuration and monitoring - Labels and LIB - Terminology and forwarding - LDP and RSVP - Segment routing basics |
| Topic 8: Tunnels | 5-8% | - GRE and IP-IP tunnels - Tunnel configuration and usage |
| Topic 9: Border Gateway Protocol (BGP) | 20-25% | - IBGP and EBGP - Configuration and troubleshooting - Basic operation and message types - Path selection and attributes - Policy and route filtering |
| Topic 10: IPv6 | 8-12% | - OSPFv3 and BGP for IPv6 - Autoconfiguration - Address types and format - Static and dynamic routing |
Maybe you are still worried about how to prepare for JN0-364 exam. You will stop worrying when you read this entry, because you have found the most authoritative professional provider of IT exam dumps. Our exam software has helped a lot of IT workers successfully get JN0-364 Exam Certification. The reason why they pass the exam easily is very simple. They all make use of our most complete and latest dumps. We will provide on-year free update service after you purchased JN0-364 exam software.
NEW QUESTION # 74
Interface ge-0/0/0.0 connects your network to your ISP. You want to advertise this interface address as an Internal route In OSPF without creating a neighbor with your ISP. In this scenario, how is this task accomplished?
Answer: D
NEW QUESTION # 75
Which statement about RSVP-signaled LSPs is correct?
Answer: D
Explanation:
In a Juniper Networks environment,Resource Reservation Protocol (RSVP)is a signaling protocol used to establish Label-Switched Paths (LSPs). While RSVP handles the actual signaling (requesting labels and reserving bandwidth along a path), it does not inherently know which path to take. This is whereConstrained Shortest Path First (CSPF)comes into play.
CSPFis an advanced version of the Dijkstra algorithm used specifically for traffic engineering. Unlike the standard SPF used by IGPs, which only considers the shortest metric, CSPF takes into account multiple constraints such as available bandwidth, link coloring (administrative groups), and explicit hop requirements.
According to Juniper technical documentation, when an LSP is configured, the Ingress router uses CSPF to calculate a loop-free path that satisfies all these constraints before RSVP begins signaling. This is why statementBis the correct description of the operational flow.
StatementDis a common distractor. While CSPF uses theTraffic Engineering Database (TED)to perform its calculations, the path is not "calculated by the TED" itself; the TED is merely the repository of link-state information (provided by OSPF or IS-IS extensions). StatementCrefers to Segment Routing Global Block (SRGB), which is relevant to Segment Routing (SR-TE), not standard RSVP-signaled LSPs. Finally, statement Ais incorrect because admin-groups (link coloring) are actually one of the primary constraints thatrequire CSPF to determine a valid path.
NEW QUESTION # 76
By default, which three fields are used in the ECMP load-balancing algorithm for Layer 3 IPv4 traffic? (Choose three.)
Answer: B,D,E
NEW QUESTION # 77
You are configuring BGP for IPv6 operations. In this scenario, which two statements are correct? (Choose two.)
Answer: B,D
Explanation:
When implementingMultiprotocol BGP (MP-BGP)for IPv6, several architectural constants remain consistent with the original BGP design, while others have evolved to accommodate larger network scales.
Router ID (Option C):
A critical point in Juniper's Service Provider documentation is that theBGP Router IDremains a32-bit value, even when the protocol is carrying 128-bit IPv6 prefixes. The Router ID is typically represented in dotted- quad notation (e.g., 192.168.1.1). In an IPv6-only environment, a Juniper router cannot automatically derive this ID from an interface address, so it must be manually defined under [edit routing-options]. This 32-bit ID is essential for BGP tie-breaking and loop prevention within the AS.
Autonomous System Number (Option D):
TheAutonomous System Number (ASN)was originally a 16-bit value (0 to 65535). However, to address the exhaustion of available ASNs, the standard was extended to32-bit ASNs(documented in RFC 6793). In Junos OS, you can configure BGP using either the older 16-bit format or the newer 32-bit format (often represented in "asplain" or "asdot" notation). While the question mentions a 64-bit value, there is currently no standard for a 64-bit ASN in BGP; the transition from 16-bit to 32-bit satisfies current global scalability needs. Therefore, Option D is the most accurate within the context of current networking standards, as it acknowledges the coexistence of different ASN lengths.
NEW QUESTION # 78
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?
Answer: C
Explanation:
The show system switchover command is used to display the status of the Graceful Routing Engine Switchover (GRES) feature. This command is available when nonstop routing (NSR) is enabled, which works in conjunction with GRES to maintain uninterrupted routing in case of a Routing Engine switchover.
NEW QUESTION # 79
......
The Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) certification examination is an essential component of professional development, and passing this Juniper JN0-364 test can increase career options and a rise in salary. Nonetheless, getting ready for the Prepare for your JN0-364 Exam may be difficult, and many working professionals have trouble locating the JN0-364 practice questions they need to succeed in this endeavor.
JN0-364 Latest Exam Materials: https://www.lead1pass.com/Juniper/JN0-364-practice-exam-dumps.html
BTW, DOWNLOAD part of Lead1Pass JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1gI5TYULWrio7SqSNKefAYIo69J39lTjJ