What's more, part of that PassExamDumps JN0-481 dumps now are free: https://drive.google.com/open?id=19fugYy4GaolliXGk3x7LIij1hgsTNjvx
It is universally accepted that the competition in the labor market has become more and more competitive in the past years. In order to gain some competitive advantages, a growing number of people have tried their best to pass the JN0-481 exam. Because a lot of people hope to get the certification by the related exam, now many leaders of companies prefer to the candidates who have the JN0-481 Certification. In their opinions, the certification is a best reflection of the candidates’ work ability, so more and more leaders of companies start to pay more attention to the JN0-481 certification of these candidates.
| Certification Vendor: | Juniper Networks |
|---|---|
| Exam Name: | Junos Data Center, Specialist (JNCIS-DC) |
| Exam Number: | JN0-481 |
| Exam Price: | $300 USD (may vary by region) |
| Related Certifications: | JNCIP-DC JNCIA-DC JNCIE-DC |
| Available Languages: | English |
| Exam Format: | Multiple-choice, Multiple-response, Scenario-based questions |
| Passing Score: | Approximately 60–70% |
| Certificate Validity Period: | 3 years |
| Real Exam Qty: | Approximately 65 |
| Exam Duration: | 90 minutes |
| Recommended Training: | EVPN-VXLAN Learning Resources Juniper Data Center Training Courses |
| Exam Registration: | Pearson VUE Juniper Exams Juniper Certification Portal |
| Sample Questions: | Juniper JN0-481 Sample Questions |
| Exam Way: | Online proctored or Pearson VUE test center |
| Pre Condition: | JNCIA-DC is recommended but not strictly required |
| Official Syllabus URL: | https://www.juniper.net/us/en/training/certification/certification-tracks/data-center.html |
>> Examcollection JN0-481 Dumps Torrent <<
As we all know, there are many reasons for the failure of the JN0-481 exam, such as chance, the degree of knowledge you master. Although the JN0-481 exam is an exam to test your mastery of the knowledge of JN0-481, but there are so many factor to influence the result. As long as you choose our JN0-481 exam materials, you never have to worry about this problem. Because we will provide you a chance to replace other exam question bank if you didn’t pass the JN0-481 Exam at once. What’s more important it’s that also free of charge only if you provide relevant proof. It is very convenient to replace and it's not complicated at all. It will not cause you any trouble.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION # 66
What does EVPN use lo identity which remote leaf device advertised the EVPN route?
Answer: D
Explanation:
EVPN uses a route distinguisher (RD) value to identify which remote leaf device advertised the EVPN route. An RD is a 64-bit value that is prepended to the EVPN NLRI to create a unique VPNv4 or VPNv6 prefix. The RD value is usually derived from the IP address of the PE that originates the EVPN route. By comparing the RD values of different EVPN routes, a PE can determine which remote PE advertised the route and which VRF the route belongs to.
NEW QUESTION # 67
Which two statements are correct regarding a pristine configuration in Juniper Apstra? (Choose two.)
Answer: A,D
Explanation:
A pristine configuration in Juniper Apstra is the configuration file that is used to onboard a device into the Apstra software application. A pristine configuration contains the minimum settings that are required for the device to communicate with the Apstra server, such as the hostname, management IP address, username, password, and SSH key. A pristine configuration has the following characteristics:
It is the configuration file placed on the device when decommissioning the device. This is because when a device is decommissioned from the Apstra software application, it is reverted back to its pristine configuration, which removes all the network configuration and services that were applied by the Apstra software application. This allows the device to be reused or repurposed for another network.
It is the configuration file on a device before acknowledgment in Apstra. This is because when a device is onboarded into the Apstra software application, it is initially in the discovery state, which means that the device is discovered by the Apstra server, but not yet acknowledged by the user.
In the discovery state, the device has the pristine configuration, which can be viewed and edited by the user. Once the user acknowledges the device, the device moves to the deployed state, which means that the device is ready to receive the network configuration and services from the Apstra software application.
NEW QUESTION # 68
What is the primary reason for creating an Apstra worker node?
Answer: D
Explanation:
The primary reason for creating an Apstra worker node is to offload resource-intensive tasks such as running off-box agents and Intent-Based Analytics (IBA) probes from the main Apstra server.
This improves performance and scalability, especially in larger or more complex deployments.
NEW QUESTION # 69
You are using Juniper Apstra to create security policies that create ACLs on the fabric devices. What are two valid objects that would be used within Apstra in this scenario? (Choose two.)
Answer: A,D
Explanation:
In Apstra 5.1, Security Policies express traffic-permit/deny intent between defined fabric endpoints, and Apstra compiles that intent into ACL enforcement on the appropriate switches (for example, on gateway interfaces for east-west segmentation and on border leaf interfaces for north-south controls). The objects you use to define that policy intent must correspond to fabric connectivity constructs that Apstra understands as endpoints in the blueprint's logical model.
Two such valid objects are Virtual Networks and Routing Zones. A virtual network represents a tenant segment (typically mapped into EVPN-VXLAN constructs such as VNI and associated IRB gateway when L3 is enabled). Policies between virtual networks are a common way to implement micro-segmentation or tier-based segmentation (web/app/db) within the same tenant boundary. A routing zone represents the L3 tenancy boundary (mapped to a VRF) and can be used to group and control connectivity at the tenant level, especially where policy needs to be expressed for aggregated tenant domains or for controls involving external connectivity.
"Domain name" and "application signature" are not endpoint objects for Apstra Security Policies in this context. They may exist in other security ecosystems, but Apstra's security intent model for ACL generation is based on topology and blueprint objects (routing zones, virtual networks, and endpoint definitions), which can then be rendered into Junos v24.4 firewall filter-style enforcement on the fabric devices.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/policy-security.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/routing-zones.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/concept/virtual-networks.html
NEW QUESTION # 70
You are allowed to assign tags for which three objects? (Choose three.)
Answer: C,D,E
Explanation:
In Juniper Apstra 5.1, tags are a lightweight metadata mechanism used to classify objects and enable conditional automation (for example, driving dynamic configlets or simplifying filtering/searching in the UI). Apstra supports tagging several blueprint-operational objects that commonly participate in day-1/day-2 workflows.
Virtual networks can be tagged so operators can group, search, and apply automation consistently across sets of segments. This is useful in EVPN-VXLAN fabrics where virtual networks represent VLAN- or VXLAN-backed broadcast domains and you may want policies or configlet logic to apply to all "finance" or "pci" segments as a group.
Interfaces can be tagged directly within a blueprint (for example, leaf access ports, uplinks, or specific border-facing ports). Interface tags are often used to drive template-based configuration behavior and to simplify operational actions across many ports without relying on fragile naming conventions.
Generic systems (internal or external) can also be tagged. Apstra documentation explicitly describes using tags to specify roles for internal generic systems, enabling you to differentiate server types or attachment roles and then apply the correct intent (connectivity templates, VN attachments, or policies) in a repeatable way.
By contrast, property sets are structured data objects used for parameterization (YAML/JSON values for templates/probes), and device profiles describe hardware/NOS capabilities; they are not the standard blueprint objects for tag assignment in this scenario.
Verified Juniper sources (URLs):
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/task/tag-virtual-network-update.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/tag-interface-add-remove-datacenter.html
https://www.juniper.net/documentation/us/en/software/apstra5.1/apstra-user-guide/topics/topic-map/internal-generic-system-create.html
NEW QUESTION # 71
......
JN0-481 Exam Course: https://www.passexamdumps.com/JN0-481-valid-exam-dumps.html
P.S. Free 2026 Juniper JN0-481 dumps are available on Google Drive shared by PassExamDumps: https://drive.google.com/open?id=19fugYy4GaolliXGk3x7LIij1hgsTNjvx