Three formats of Juniper JN0-364 practice exams meet the diverse needs

BTW, DOWNLOAD part of TestKingFree JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1aVo0CEHyBVNtZODGFpo6ZeSbCujqd7LW

For candidates who are going to buy JN0-364 study guide materials online, the safety for the website is important. We have professional technicians to examine the website at times. If you choose us, we will provide you with a clean and safe online shopping environment. Besides, we offer you free demo for JN0-364 exam materials for you to have a try, so that you can know the mode of the complete version. You can enjoy free update for one year for JN0-364 Exam Materials, so that you can know the latest version for the exam timely. The update version for JN0-364 exam materials will be sent to your email automatically.

Juniper JN0-364 Exam Syllabus Topics:

SectionObjectives
Border Gateway Protocol (BGP)- Identify the concepts, operation, or functionality of BGP
  • 1. BGP basic operation
  • 2. BGP message types
  • 3. Route selection process
  • 4. Attributes
  • 5. BGP route reflection and confederations
  • 6. IBGP and EBGP functionality and interaction
- Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Peers and peer groups
IPv6- Identify the concepts, operation, or functionality of IPv6
  • 1. Dynamic routing - OSPFv3, IS-IS, BGP
  • 2. Static routes
  • 3. IPv6 over IPv4 tunneling
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Multiprotocol Label Switching (MPLS)- Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices
  • 1. LDP
  • 2. Labels and the label information base
  • 3. MPLS packet header
  • 4. MPLS and routing tables
  • 5. Segment routing with MPLS
  • 6. MPLS terminology
  • 7. RSVP
  • 8. End-to-end packet flow and forwarding
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS
  • 1. LDP-signaled Label-Switched Paths (LSPs)
  • 2. MPLS forwarding
  • 3. RSVP-signaled Label-Switched Paths (LSPs)
  • 4. Shortest path segment-routing LSPs
Intermediate System to Intermediate System (IS-IS)- Identify the concepts, operation, or functionality of IS-IS
  • 1. Metrics
  • 2. Adjacencies and neighbors
  • 3. Designated intermediate system (DIS)
  • 4. IS-IS protocol data units (PDUs)
  • 5. Type, length, values (TLVs)
  • 6. Levels and areas
  • 7. Link-state database
- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS
  • 1. Routing policy application
  • 2. Interfaces and adjacencies
  • 3. Troubleshooting tools
Layer 2 Bridging or VLANs- Identify the concepts, benefits, or functionality of VLANs
  • 1. Integrated Routing and Bridging (IRB)
  • 2. Port modes
  • 3. Tagging
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs
  • 1. VLANs
  • 2. Provider bridging
  • 3. IRB
  • 4. Interfaces and ports
- Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS
  • 1. Bridging elements and terminology
  • 2. Virtual Switches
  • 3. Frame processing
  • 4. Service provider switching platforms
  • 5. Provider bridging (Q-in-Q tunneling)
Open Shortest Path First (OSPF)- Identify the concepts, operation, or functionality of OSPF
  • 1. OSPF packet types
  • 2. OSPF area and router types
  • 3. Adjacencies and neighbors
  • 4. Router ID
  • 5. Designated router and backup designated router
  • 6. Link-state advertisement (LSA) packet type
  • 7. Link-state database
- Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF
  • 1. Routing policy application
  • 2. Troubleshooting tools
  • 3. Interfaces and neighbor
Protocol-Independent Routing- Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components
  • 1. Load balancing
  • 2. Static, aggregate, and generated routes
  • 3. Filter-based forwarding
- Identify the concepts, operation, or functionality of various protocol-independent routing components
  • 1. Load balancing
  • 2. Martian addresses
  • 3. Static, aggregate, and generated routes
  • 4. Routing instances, including routing information base (RIB) (also known as routing table) group
  • 5. Filter-based forwarding
Spanning Tree Protocols- Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols
  • 1. RSTP
  • 2. VSTP
  • 3. MSTP
  • 4. STP
- Identify the concepts, operation, or functionality of STP
  • 1. RSTP
  • 2. VSTP
  • 3. MSTP
  • 4. STP

>> Valid JN0-364 Test Preparation <<

JN0-364 Updated Dumps & Exam JN0-364 Tutorials

Our Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam questions are being offered in three easy-to-use and compatible formats. These Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam dumps formats offer a user-friendly interface and are compatible with all devices, operating systems, and browsers. The TestKingFree Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) PDF questions file contains real and valid Juniper JN0-364 exam questions that assist you in JN0-364 exam dumps preparation and boost the candidate's confidence to pass the challenging Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) exam easily.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q32-Q37):

NEW QUESTION # 32
In OSPF, which three fields must match between neighbors before forming an adjacency?
(Choose three.)

Answer: A,C,D

Explanation:
For OSPF neighbors to form an adjacency, certain parameters exchanged in Hello packets must match. The hello interval must be identical on both routers so they send Hello packets at the same rate. The network mask must match on broadcast and nonbroadcast networks to ensure both routers are operating on the same subnet. The dead interval must also match so both routers agree on how long to wait before declaring a neighbor down.


NEW QUESTION # 33
You are evaluating BGP between two Juniper routers and the BGP session is stuck in the Idle state. What would cause this behavior?

Answer: A

Explanation:
In the BGP Finite State Machine (FSM), theIdlestate is the first stage of any BGP connection. When a BGP session is "stuck" in Idle, it typically indicates that the router is unable to even begin the process of establishing a TCP connection with its neighbor. According to Juniper Networks documentation, before BGP can transition to theConnectorActivestates, it must have a valid route to the neighbor's IP address in the routing table and be able to initiate a three-way TCP handshake on port 179.
If thepeer IP address is incorrect(Option D), the router may not have a route to that destination, or it may be attempting to connect to a non-existent or unreachable host. In many Junos configurations, if the underlying IGP (OSPF/IS-IS) or static routing cannot provide reachability to the neighbor address defined in the BGP configuration, the BGP process will remain in the Idle state and periodically retry the connection.
Regarding the other options:
* The local AS number is missing (Option C):In Junos, you cannot commit a BGP configuration if the local autonomous system is not defined at either the [edit routing-options] level or within the BGP group itself. The commit check would fail before the session could even attempt to start.
* The BGP group type (Option B):Having a mismatch in group type (internal vs. external) usually results in the session reaching theOpenSentorOpenConfirmstate before failing due to an
"unacceptable AS" error in the OPEN message.
* BGP hold time (Option A):Issues with hold timers or keepalives generally cause a session that is already in theEstablishedstate to drop; they do not prevent the session from leaving the Idle state.


NEW QUESTION # 34
Exhibit:

Referring to the exhibit, R1 is advertising prefix 203.0.113.0/24 to R2 over EBGP. R2 is configured to advertise this prefix into IBGP. R3 receives the 203.0.113.0/24 route, however the route is hidden.
Which configuration statement do you need to add to R2 to solve this problem?

Answer: C

Explanation:
In Juniper Networks Junos OS, a "hidden" route in the BGP table typically signifies that the router has received the prefix but cannot install it into the active routing table because theBGP next hop is unreachable
. This is a common occurrence in service provider environments when transitioning betweenExternal BGP (EBGP)andInternal BGP (IBGP).
According to Juniper technical documentation, when an EBGP speaker (R1) advertises a prefix to its peer (R2), it sets the next hop to its own interface IP address ($172.16.10.1$). By default, when R2 re-advertises that prefix to its IBGP peer (R3), itpreserves the original EBGP next-hop address. Unless R3 has a specific route in its Interior Gateway Protocol (IGP) or a static route to reach the $172.16.10.1$ subnet, it will mark the route as unusable (hidden).
In the exhibit, the show route output onR3explicitly shows the nexthop for $203.0.113.0/24$ as
$172.16.10.1$. Since this route is marked "hidden," we can conclude R3 does not know how to reach R2's external peering link. To resolve this, the network administrator must modify the next-hop attribute before the route is sent to R3.
By adding the statementset policy-options policy-statement export-to-ibgp then next-hop self(Option B) on routerR2, R2 will replace the external next-hop ($172.16.10.1$) with its own internal peering address ($172.16.20.1$) before advertising the route to R3. Because R3 already has a direct or IGP connection to R2's internal address, it will successfully resolve the next hop, and the route will transition from "hidden" to
"active."
Option A is unnecessary because the route is already being exported; Option C is redundant as the policy is already applied to the IBGP group; and Option D changes path preference but does not solve the underlying reachability problem.


NEW QUESTION # 35
Referring to the exhibit, from which device(s) does R3 learn about Route X?

Answer: B

Explanation:
R2 can not forward IBGP learned routes to another IBGP neighbor correct R3 will learn about Route X from R2 only. R1 is in a separate AS and Route X is advertised to R2 through eBGP. R2 will then advertise the route to R3 using iBGP. R3 cannot learn routes directly from another AS without having a direct eBGP session with that AS.


NEW QUESTION # 36
What are three types of MPLS routers? (Choose three.)

Answer: B,C,D

Explanation:
In an MPLS network, the types of routers include ingress routers (where the MPLS labels are first applied), egress routers (where MPLS labels are removed), and transit routers (which switch MPLS- labeled packets through the MPLS network). Peering routers and aggregation routers are not specific types of MPLS routers; they are general network terms.


NEW QUESTION # 37
......

But with proper planning, firm commitment, and complete JN0-364 exam preparation will enable you to make this Juniper JN0-364 easiest. Are you ready to accept this challenge? Looking for a simple, smart, and quick way of completing Juniper JN0-364 Exam Preparation? If your answer is yes then you must try TestKingFreeย JN0-364 Questions.

JN0-364 Updated Dumps: https://www.testkingfree.com/Juniper/JN0-364-practice-exam-dumps.html

DOWNLOAD the newest TestKingFree JN0-364 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1aVo0CEHyBVNtZODGFpo6ZeSbCujqd7LW