BTW, DOWNLOAD part of Dumpkiller F5CAB2 dumps from Cloud Storage: https://drive.google.com/open?id=1diCZaHxRk2no5AsF8Vba2uylXRYLVIwH
Perhaps you plan to seek a high salary job. But you are not confident enough because of lack of ability. Now, our F5CAB2 practice guide is able to give you help. You will quickly master all practical knowledge in the shortest time. Also, obtaining the F5CAB2 certificate fully has no problem. With the high pass rate of our F5CAB2 exam braindumps as 98% to 100%, we can claim that as long as you study with our F5CAB2 study materials, you will pass the exam for sure.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
In recent years, some changes are taking place in this line about the new points are being constantly tested in the BIG-IP Administration Data Plane Concepts (F5CAB2) real exam. So our experts highlight the new type of F5CAB2 questions and add updates into the practice materials, and look for shifts closely when they take place. As to the rapid changes happened in this F5CAB2 Exam, experts will fix them and we assure your F5CAB2 exam simulation you are looking at now are the newest version. And we only sell the latest F5CAB2 exam questions and answers.
NEW QUESTION # 29
What is the result when a BIG-IP Administrator manually disables a pool member? (Choose one answer)
Answer: D
Explanation:
Comprehensive and Detailed Explanation From BIG-IP Administration Data Plane Concepts documents:
In BIG-IP LTM, a pool member state directly affects how traffic is handled at the data plane level. When a pool member is manually disabled, BIG-IP changes the member's availability state to disabled, which has specific and predictable traffic-handling consequences.
According to BIG-IP Administration Data Plane Concepts:
A disabled pool member:
Does not accept new connections
Continues to process existing non-persistent connections until they naturally close Is removed from load-balancing decisions, including persistence lookups Most importantly for this question:
Persistent connections
(such as those created using source-address persistence, cookie persistence, or SSL persistence) are not honored for a disabled pool member BIG-IP will not send new persistent traffic to a disabled member, even if persistence records exist Therefore, when a pool member is manually disabled, it stops processing persistent connections, while allowing existing non-persistent flows to drain gracefully.
Why the Other Options Are Incorrect:
B - Persistent connections are not honored for a disabled pool member
C - Existing connections are not immediately terminated when a pool member is disabled D - Only the disabled pool member stops accepting new connections, not all pool members Key Data Plane Concept Reinforced:
Manually disabling a pool member is a graceful administrative action that prevents new and persistent traffic from reaching the member while allowing existing connections to complete, which is critical for maintenance and troubleshooting scenarios.
NEW QUESTION # 30
An organization needs to deploy an HTTP application on a BIG-IP system. The requirements specify hardware acceleration to enhance performance, while HTTP optimization features are not required.
What type of virtual server and associated protocol profile should be used to meet these requirements? (Choose one answer)
Answer: D
Explanation:
Comprehensive and Detailed Explanation From BIG-IP Administration Data Plane Concepts documents:
To select the correct virtual server type, an administrator must balance the need for L7 intelligence versus raw throughput and hardware offloading:
Performance (Layer 4) Virtual Server: This type is designed for maximum speed. It uses the fastL4 profile, which allows the BIG-IP system to leverage the ePVA (Embedded Packet Velocity Accelerator) hardware chip. When a Performance (L4) virtual server is used, the system processes packets at the network layer (L4) without looking into the application payload (L7). This fulfills the requirement for hardware acceleration and avoids the overhead of HTTP optimization features, which are not needed in this scenario.
Performance (HTTP) Virtual Server: While fast, this type uses the fasthttp profile to provide some L7 awareness and optimization (like header insertion or small-scale multiplexing). Since the requirement specifically states HTTP optimization is not required, the L4 variant is more efficient.
Standard Virtual Server: This is a full-proxy type. While it offers the most features (SSL offload, iRules, Compression), it processes traffic primarily in the TMOS software layer (or via high-level hardware assistance), which is "slower" than the pure hardware switching path of the Performance (L4) type.
Stateless Virtual Server: This is typically used for specific UDP/ICMP traffic where the system does not need to maintain a connection table. It is not appropriate for standard HTTP (TCP) applications requiring persistent sessions or stateful load balancing.
By choosing Performance (Layer 4) with the fastL4 profile, the organization ensures that the traffic is handled by the hardware acceleration chips, providing the lowest latency and highest throughput possible for their HTTP application.
NEW QUESTION # 31
Refer to the exhibit.
During a planned upgrade to a BIG-IP HA pair running Active/Standby, an outage to application traffic is reported shortly after the Active unit is forced to Standby. Reverting the failover resolves the outage. What should the BIG-IP Administrator modify to avoid an outage during the next failover event? (Choose one answer)
Answer: A
Explanation:
Comprehensive and Detailed Explanation (BIG-IP Administration - Data Plane Concepts):
In an Active/Standby BIG-IP design, application availability during failover depends on both units having equivalent data-plane connectivity for the networks that carry application traffic. Specifically:
VLANs are bound to specific interfaces (and optionally VLAN tags).
Floating self IPs / traffic groups move to the new Active device during failover.
For traffic to continue flowing after failover, the new Active device must have the same VLANs available on the correct interfaces that connect to the upstream/downstream networks.
What the symptom tells you:
Traffic works when Device A is Active
Traffic fails when Device B becomes Active
Failback immediately restores traffic
This pattern strongly indicates the Standby unit does not have the VLAN connected the same way (wrong physical interface assignment), so when it becomes Active, it owns the floating addresses but cannot actually pass traffic on the correct network segment.
Why Interface mismatch is the best match:
If the Active unit is already working, its interface mapping is correct.
The fix is to make the Standby unit's VLAN/interface assignment match the Active unit.
That corresponds to changing the Standby device interface to 1.1.
Why the Tag options are less likely here (given the choices and the exhibit intent):
Tag issues can also break failover traffic, but the question/options are clearly driving toward the classic HA requirement: consistent VLAN-to-interface mapping on both devices so the data plane remains functional after the traffic group moves.
Conclusion: To avoid an outage on the next failover, the BIG-IP Administrator must ensure the Standby device uses the same interface (1.1) for the relevant VLAN(s) that carry the application traffic, so when it becomes Active it can forward/receive traffic normally.
NEW QUESTION # 32
Which two statements describe differences between the active and standby systems? (Choose two.)
Answer: C,D
Explanation:
The primary distinction between Activ41e and Standby units revolves around which unit is currently processing traffic.
* Traffic Objects (C & E): The unit in the 43Active state is the only one that answers ARP requests for Virtual Server addresses and Floating Self-IPs. The Standby unit remains "quiet" for these addresses to avoid IP conflicts on the network.
* Monitors (A - False): Both the Active and Standby units perform health monitors on pool members by default. This ensures that the Standby unit is ready to take over with an up-to-date view of the pool's health.
* Failover (B - False): A failover trigger (like a VLAN fail-safe) causes the Active unit to go Standby and the Standby unit to go Active; it affects both.
* Management (D - False): Configuration changes can technically be made on either unit (though it is best practice to make them on the Active unit) and then synchronized to the peer.
NEW QUESTION # 33
A BIG-IP Administrator configures remote authentication and needs to ensure that users can still log in even when the remote authentication server is unavailable. Which action should the BIG-IP Administrator take in the remote authentication configuration to meet this requirement? (Choose one answer)
Answer: D
Explanation:
Although remote authentication (LDAP, RADIUS, TACACS+) is a control-plane / management-plane feature, it directly affects availability and resiliency of administrative access, which is a critical operational HA consideration.
How BIG-IP Remote Authentication Works:
* BIG-IP can authenticate administrators against:
* LDAP
* RADIUS
* TACACS+
* When remote authentication is enabled, BIG-IP by default relies on the remote server for user authentication
* If the remote authentication server becomes unreachable, administrators may be locked out unless fallback is configured Why "Fallback to Local" Is Required:
The Fallback to Local option allows BIG-IP to:
* Attempt authentication against the remote authentication server first
* If the remote server is unreachable or unavailable, fall back to:
* Local BIG-IP user accounts (admin, or other locally defined users)
This ensures:
* Continuous administrative access
* Safe recovery during:
* Network outages
* Authentication server failures
* Maintenance windows
This behavior is explicitly recommended as a best practice in BIG-IP administration to avoid loss of management access.
Why the Other Options Are Incorrect:
* A. Configure a second remote user directory
* Provides redundancy only if both directories are reachable
* Does not help if remote authentication as a whole is unavailable
* B. Configure a remote role group
* Maps remote users to BIG-IP roles
* Does not affect authentication availability
* D. Set partition access to "All"
* Controls authorization scope after login
* Has no impact on authentication success
Key Availability Concept Reinforced:
To maintain administrative access resiliency, BIG-IP administrators should always enable Fallback to Local when using remote authentication. This prevents lockouts and ensures access even during authentication infrastructure failures.
NEW QUESTION # 34
......
We can guarantee that you are able not only to enjoy the pleasure of study but also obtain your F5 F5CAB2 certification successfully, which can be seen as killing two birds with one stone. And you will be surprised to find our superiorities of our F5 F5CAB2 Exam questioms than the other vendors.
New F5CAB2 Dumps Questions: https://www.dumpkiller.com/F5CAB2_braindumps.html
DOWNLOAD the newest Dumpkiller F5CAB2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1diCZaHxRk2no5AsF8Vba2uylXRYLVIwH