DOWNLOAD the newest Itexamguide SRAN-Radio-Network-Performance-Optimization PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1Oed8iekDn922SuMJAoGcNusjIO-_wrmS
These Nokia SRAN-Radio-Network-Performance-Optimization Exam questions help you practice theoretical and practical skills in different aspects, making problem-solving easier. Our Nokia SRAN-Radio-Network-Performance-Optimization questions PDF is a complete bundle of problems presenting the versatility and correlativity of questions observed in past exam papers. These questions are bundled into Nokia SRAN-Radio-Network-Performance-Optimization PDF Questions following the official study guide.
| Section | Weight | Objectives |
|---|---|---|
| Radio Network Optimization Techniques | 25-30% | - Handover optimization - Parameter tuning best practices - Interference analysis and mitigation - Load balancing techniques - Coverage optimization methods - Capacity optimization strategies |
| Radio Network Performance Monitoring | 20-25% | - Performance data collection and analysis - Performance monitoring tools and dashboards - Threshold configuration and alerting - KPI definition and measurement - Real-time network monitoring techniques |
| SRAN Architecture and Fundamentals | 15-20% | - SRAN solution components and functions - Single RAN integration principles - Radio access concepts and principles - SRAN network architecture overview |
| SRAN Optimization Tools and Reports | 10-15% | - Automated optimization features - Nokia NetAct and performance tools - Configuration management for optimization - Report generation and interpretation |
| Performance Troubleshooting | 20-25% | - Troubleshooting tools utilization - Network failure identification and resolution - Common performance issues diagnosis - Root cause analysis methodologies - Optimization case studies |
>> SRAN-Radio-Network-Performance-Optimization Passing Score <<
So many candidates have encountered difficulties in preparing to pass the SRAN-Radio-Network-Performance-Optimization exam. But our study materials will help candidates to pass the exam easily. Our SRAN-Radio-Network-Performance-Optimization guide questions can provide statistics report function to help the learners to find weak links and deal with them. The SRAN-Radio-Network-Performance-Optimization test torrent boost the function of timing and simulating the exam. They set the timer to simulate the exam and help the learners adjust the speed and keep alert. So the SRAN-Radio-Network-Performance-Optimization Guide questions are very convenient for the learners to master and pass the exam. So believe us and take action immediately to buy our SRAN-Radio-Network-Performance-Optimization exam torrent.
NEW QUESTION # 13
When selecting an LTE anchor layer for EN-DC , why is it important to check 3GPP band combinations ?
Answer: A
Explanation:
The correct answer is B .
In 5G NSA EN-DC , the UE connects to LTE as the Master Cell Group , or anchor, and NR as the Secondary Cell Group . Not every LTE band can be paired with every NR band. The supported LTE-NR combinations are defined by 3GPP band-combination rules and must also be supported by the UE chipset and device capability.
For example, an operator may have LTE Band 3, Band 7, or Band 20 and NR n78, but only certain LTE-NR combinations may be valid for EN-DC. If the selected LTE anchor band is not supported in combination with the NR band, the UE will not be able to establish EN-DC even if LTE and NR coverage both exist.
Option C is not correct because dual-uplink support depends on UE capability and specific band-combination support; it cannot be guaranteed for all UE models. Option A and D are unrelated to the main purpose of checking 3GPP band combinations.
So the correct reason is:
To ensure that LTE and NR bands are compatible and allowed as EN-DC pairs.
NEW QUESTION # 14
At which mark are all conditions fulfilled for energy saving , so the cell will be switched off? Refer to the image below.
Answer: B
Explanation:
The correct answer is B , which corresponds to mark C in the diagram.
In the diagram, the energy-saving process follows these stages:
Before mark B , the cell is entering the power-saving period, but the required load condition has not yet been satisfied for the required duration.
At mark B , the measured load has gone below the configured threshold, but the cell is not switched off immediately. The system must confirm that the load remains below the required threshold for the configured time.
At mark C , the load has stayed below the required threshold for the required duration, shown as 5 minutes in the diagram. At this point, all conditions are fulfilled, and the cell can be switched off. The diagram also shows the state becoming:
energySavingState = energySaving
Marks D and E are already inside or near the later part of the power-saving period. Mark E is associated with operator suspension/exit behavior, not the initial moment when all switch-off conditions are first fulfilled.
NEW QUESTION # 15
Which statement is not true about MantaRay SON ?
Answer: B
Explanation:
The correct answer is B .
The statement "Energy savings management is not covered" is not true . Nokia describes MantaRay SON as supporting radio network performance, quality, and energy efficiency optimization. Nokia also references AI-powered energy savings management and RAN energy efficiency use cases under its SON/MantaRay automation portfolio.
The other statements are aligned with Nokia SON/MantaRay positioning. Nokia describes MantaRay SON as an automation layer within the MantaRay SMO framework, with support for multi-supplier/non-real-time RIC functionality and an application ecosystem. Nokia also has historical EdenNet SON material, including EdenNet SON Energy Saving Management.
Therefore, the statement that is not true is:
Energy savings management is not covered.
NEW QUESTION # 16
Evaluate the impact of extended FR2 cell range on power consumption.
Answer: B
Explanation:
The correct answer is C .
In FR2/mmWave , uplink coverage is often the limiting factor because UE transmit power is much lower than gNodeB transmit power, and mmWave propagation suffers from high path loss and blockage. Ericsson's mmWave coverage discussion also notes that high-band coverage is limited by uplink signal quality and high- band propagation characteristics.
When the FR2 cell range is extended, UEs farther from the serving cell must transmit uplink signals over a more difficult radio path. This usually requires higher UE transmit power, more robust MCS, more repetitions or retransmissions, and potentially longer uplink activity. As a result, UE battery consumption can increase.
Therefore, extended FR2 range generally:
Increases power consumption because UEs need more energy to transmit uplink signals.
NEW QUESTION # 17
In a 5G NSA Option 3x deployment, why should we not define 5G neighbors in LTE sectors where there is no 5G coverage ?
Answer: D
Explanation:
The correct answer is A .
In 5G NSA Option 3x , LTE acts as the Master Cell Group , and NR acts as the Secondary Cell Group , usually added through EN-DC . If 5G NR neighbors are configured in an LTE sector where there is actually no 5G coverage , the LTE eNB may still configure the UE to perform NR measurements.
To perform NR inter-RAT or inter-frequency measurements, the UE may require measurement gaps .
During these gaps, the UE stops normal LTE reception/transmission activities to measure NR frequencies. If there is no real 5G coverage, those gaps become wasted measurement time and can reduce LTE user throughput.
Option B is not the best answer because if there is no 5G coverage, the main issue is not successful SCG addition or handover degradation, but unnecessary measurement activity. Option C is also not correct because redirection from 5G to 4G normally occurs when the UE is already on or connected to 5G coverage, which is not the case here.
Therefore, the main reason is:
LTE throughput degradation due to unnecessary measurement gap configuration.
NEW QUESTION # 18
......
Itexamguide has made the SRAN-Radio-Network-Performance-Optimization exam dumps after consulting with professionals and getting positive feedback from customers. The team of Itexamguide has worked hard in making this product a successful Nokia SRAN-Radio-Network-Performance-Optimization Study Material. So we guarantee that you will not face issues anymore in passing the Nokia SRAN-Radio-Network-Performance-Optimization certification test with good grades.
SRAN-Radio-Network-Performance-Optimization Practice Exams: https://www.itexamguide.com/SRAN-Radio-Network-Performance-Optimization_braindumps.html
P.S. Free & New SRAN-Radio-Network-Performance-Optimization dumps are available on Google Drive shared by Itexamguide: https://drive.google.com/open?id=1Oed8iekDn922SuMJAoGcNusjIO-_wrmS