P.S. Free & New MB-335 dumps are available on Google Drive shared by Prep4King: https://drive.google.com/open?id=1dSs1BI3bpHkC6zo5UtgFb9n2PMjcz71i
Many candidates find the Microsoft MB-335 exam preparation difficult. They often buy expensive study courses to start their Microsoft MB-335 certification exam preparation. However, spending a huge amount on such resources is difficult for many Microsoft MB-335 Exam applicants.
| Section | Objectives |
|---|---|
| Configure and manage product information | - Manage product and product master data
|
| Implement planning and optimization | - Supply chain optimization
|
| Manage supply chain processes | - Procurement and sourcing
|
| Manage inventory and warehouse operations | - Warehouse management
|
| Implement transportation and logistics | - Transportation management
|
Time is flying and the exam date is coming along, which is sort of intimidating considering your status of review process. The more efficient the materials you get, the higher standard you will be among competitors. So, our high quality and high accuracy rate MB-335 Training Materials are your ideal choice this time. With the high pass rate as 98% to 100%, i can say that you won't find the better MB-335 exam questions than ours. And our MB-335 study guide is offered by a charming price.
NEW QUESTION # 157
A company uses multiple Dynamics 365 applications to track and repair equipment.
The company wants to improve its repair order process. Repair technicians frequently encounter unexpected issues daily. The technicians must be empowered to address the issues and create new work orders by doing the following:
* Provide step-by-step, just-in-time training for work order completion in the field by using videos and text.
* Document work order creation in a single, printable document.
* Report on the use of hands-on training.
You need to implement a solution forth requirements.
Which solution should you implement for each requirement? To answer, drag the appropriate solutions to the correct requirements. Each solution may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
Explanation:
Explanation:
To implement a solution for the requirements, you should use the following solutions:
* Just-in-time training: You should use Dynamics 365 Guides. This solution allows you to create interactive, step-by-step learning experiences for repair technicians in the field. You can use videos, images, and text to provide instructions and tips for work order completion. You can also use mixed reality tools to overlay holograms on physical objects and guide technicians through complex tasks.
* Work order creation document: You should use Dynamics 365 Supply Chain Management. This solution allows you to create and manage work orders for equipment maintenance and repair. You can use the Work order page to enter the details of the work order, such as the customer, the equipment, the service tasks, the materials, and the costs. You can also print a work order report that summarizes the information in a single document.
* Training reporting: You should use Dynamics 365 Guides. This solution allows you to track and analyze the usage and effectiveness of your guides. You can use Power BI dashboards to view metrics such as completion rates, duration, errors, and feedback for each guide and step. You can also filter the data by date, location, operator, or device.
[What is Dynamics 365 Guides?] : [Work orders overview] : [Print a work order report] : [Analyze guide effectiveness]
NEW QUESTION # 158
A recreational vehicle (RV) manufacturing company is implement Dynamics 365 Supply Chain Management.
All RVs are configured to order.
Quality checks show that there is an issue with the sealant used with the windows in some of the RVs.
You need to identify which RV models use the sealant and change the sealant item.
Which function should you use for each requirement? To answer, drag the appropriate functions to the correct requirements. Each function may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 159
You need to set up the system to calculate the overhead rates automatically for production.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
A screenshot of a computer Description automatically generated
Topic 1, CASE STUDY 1 Manufacturing Company
General information
A manufacturing company produces custom configured-to-order motorcycles. The company plans to implement Dynamics 365 Supply Chain Management. The company contains one legal entity located in Missouri where all production and warehousing operations occur.
Customization options
The custom motorcycles have a variety of selections that can be selected in the listed order by the end customer, including the following:
Customization restrictions
The following restrictions on customizations are in place:
* Green color can only be sold with the Legend Trim.
* Orange color can be sold with the Sport or Legend Trim.
* The ML seat must be included in the Legend package.
* The MS seat must be included in the Sport package.
Manufacturing facilities
The company includes the following manufacturing groups: Assembly and Plastic Molding. The Assembly group is responsible for assembling the motorcycles with purchased and manufactured goods. The Plastic Molding group is responsible for manufacture of all plastic parts used in the assembly area.
Motorcycle manufacturing
The parts for the product assembly are picked from the warehouse and staged at the correct workstation by a warehouse operator for each production order.
Plastic manufacturing
Plastic parts are molded using dyes that create multiple parts at once. The parts are machined in the same production process to remove excess plastic and add additional holes for assembly. Excess plastic is recycled back into the feedstock of the same color plastic chips for use in the molding process.
Metal Parts
Raw metal parts are purchased fully machined but without primer or paint. The parts are subcontracted to a vendor for primer and paint based upon the color requirements.
Facility
The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.
Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.
Requirements
The company has a single warehouse that supports both the assembly and plastic manufacturing areas. The warehouse consists of three aisles with 15 bins and three shelves. The facility has no Wi-Fi capacity but has hardwired terminal stations throughout the assembly production line.
Transactions are currently completed by office staff. Raw materials transfer must support capacity constraints for paint and primer.
Sales Order
The company has the following requirements for sales orders:
* During the configuration of a sales order, invalid combinations must be prevented.
* Each configuration must create a unique bill of material (BOM) and Route based on options selected.
* Sales pricing for the sales order must be based upon options selected.
* Due to emissions regulations, the motorcycles cannot be sold to the state of California.
Motorcycle manufacturing
The company has the following requirements for motorcycle manufacturing:
* Schedule labor only at the labor pool level without machines by day
* Produce motorcycles within a scheduled day in any order.
* Record actual production labor with start/stop times.
* Record manager approval of labor entered prior to posting.
* Post actual material consumption after production is finished.
Plastic manufacture
The company has the following requirements for motorcycle manufacturing:
* Schedule both labor and machines.
* Adjust schedules by using a Gantt chart.
* Backflush standard labor by operation.
* Post actual material consumption at the start of production.
* Track and allocate costs to the excess plastic.
* Report multiple molded part numbers during the same production run.
* Determine the correct mold to use on a production order.
* Generate a batch number for each production order.
Metal Parts
The company has the following requirements for metal parts manufacturing:
* Schedule shipments to the vendor for painting.
* Receive painted parts into inventory from the vendor.
* Track vendor inventory levels.
Default
You must configure defaults for manufacturing execution production orders to meet the following requirements:
* Ensure accuracy for production order pick list posting.
* Ensure correct pick list creation.
Issues
A. In the current system, the company cannot calculate overhead rates and determine the breakdown of material, labor, machine, and overhead costs for production.
B. The company is manually calculating an 8% overhead on materials and posting a journal manually.
NEW QUESTION # 160
You need to resolve the issue for UserE.
Which configuration options should you use? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
NEW QUESTION # 161
A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use the same sub assembly item and resource sanding process.
You observe an Increase in the number of units a sanding belt resource can produce. The production schedule is now inaccurate due to the number of units the sanding belt line can produce. You must make a permanent change to the number of units the resource can produce for all future orders.
You need to adjust the process quantity on the route operation.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Answer:
Explanation:
Explanation:
NEW QUESTION # 162
......
We have professional technicians examine the website every day, and if you purchase Microsoft Dynamics 365 Supply Chain Management Functional Consultant Expert MB-335 Learning Materials from us, we can offer you a clean and safe online shopping environment, and if you indeed meet any questions in the process of buying, you can contact us, our technicians will solve the problem for you.
Valid Braindumps MB-335 Pdf: https://www.prep4king.com/MB-335-exam-prep-material.html
BONUS!!! Download part of Prep4King MB-335 dumps for free: https://drive.google.com/open?id=1dSs1BI3bpHkC6zo5UtgFb9n2PMjcz71i