It is common in modern society that many people who are more knowledgeable and capable than others finally lost some good opportunities for development because they didn’t obtain the 4A0-D03 certification. The prerequisite for obtaining the 4A0-D03 Certification is to pass the exam, but not everyone has the ability to pass it at one time. But our 4A0-D03 exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Layer 3 EVPN Services | 25% | - VRF integration and route targets - EVPN Route Type 5 - Symmetric and asymmetric routing |
| Topic 2: SR Linux and EVPN Fundamentals | 25% | - VXLAN encapsulation and underlay - SR Linux architecture and CLI - EVPN control plane and MP-BGP |
| Topic 3: Layer 2 EVPN Services | 25% | - EVPN Route Types 1–4 - Multi-homing and Ethernet Segments - Anycast Gateway and IRB |
| Topic 4: Data Center Interconnect (DCI) Solutions | 25% | - BGP route policies and route reflectors - Gateway-less EVPN DCI - Interoperability with Nokia 7750 SR |
During the prolonged review, many exam candidates feel wondering attention is hard to focus. But our 4A0-D03 real exam is high efficient which can pass the 4A0-D03 exam during a week. To prevent you from promiscuous state, we arranged our 4A0-D03 Learning Materials with clear parts of knowledge. Besides, without prolonged reparation you can pass the 4A0-D03 exam within a week long. Everyone's life course is irrevocable, so missing the opportunity of this time will be a pity.
NEW QUESTION # 49
A host is connected to multiple PEs through multi-homing.
Which of the following is NOT a function of the EVPN route-type 4 route?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
EVPN route type 4 is the Ethernet Segment route. Its core role is to advertise Ethernet Segment membership so that PEs attached to the same multi-homed segment can discover each other. This discovery is essential for multi-homing procedures such as DF election, split-horizon behavior, and redundancy handling. When multiple PEs advertise the same ESI, the EVPN control plane can build the candidate set of PEs that participate in that Ethernet Segment. This enables DF election for BUM forwarding and supports the correct interpretation of the segment's redundancy model. The incorrect statement is option C. The election algorithm itself is not the basic function of the route type 4 advertisement in the way the question frames it. The route type is primarily about Ethernet Segment discovery and participation; the algorithmic decision process is derived from configured DF election behavior and candidate information, not from route type 4 acting as a generic algorithm identifier. Therefore, route type 4 enables DF procedures, but it is not described as the mechanism that identifies the election algorithm type. Reference: EVPN RT-4 Ethernet Segment route, DF election, multi-homing discovery.
NEW QUESTION # 50
When configuring the EVPN MP-BGP route reflector sessions between the leaf and spine routers, which of the following statements is TRUE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
In SR Linux BGP configuration, parameters defined at a more specific hierarchy level can override broader protocol-level settings. Therefore, if a `local-as` value is configured within the BGP group used for EVPN MP-BGP route-reflector sessions, that value overrides the AS number configured directly under the BGP protocol for that group's sessions. Option A is correct. Option B is false because the cluster ID is configured on the route reflector, not on every participating client. The cluster ID identifies the RR cluster and helps prevent route-reflection loops. Option C is false because redundant route reflectors normally operate in parallel rather than as strict primary/backup devices; clients can peer with both for resilience. Option D is misleading because EVPN route reflectors are used to avoid a full mesh of overlay MP-BGP EVPN sessions between leaves, not to replace ordinary underlay eBGP leaf-spine routing sessions. In a clean fabric design, the underlay provides IP reachability, while the EVPN overlay uses MP-BGP sessions, often via route reflectors, to distribute tenant reachability. Reference: SR Linux BGP hierarchy, EVPN route reflector sessions, local-AS override, cluster ID behavior.
NEW QUESTION # 51
Consider the exhibit.
Which of the following statements about the proxy ARP entry for the neighbor IP 192.168.100.1 is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
Proxy ARP in a Layer 2 EVPN service allows the leaf to answer ARP requests locally using learned IP/MAC bindings, reducing broadcast flooding across the overlay. SR Linux can also monitor IP duplication and MAC/IP inconsistencies in the proxy ARP table. A pending state indicates that the system has detected suspicious or conflicting information and is monitoring the binding before declaring it duplicate. If the entry becomes duplicate, SR Linux can use a blackhole behavior to prevent forwarding traffic toward a conflicted endpoint, and a special discard MAC such as 00:00:00:00:DE:AD can be associated with the duplicate entry. Option D is false because it incorrectly states that all traffic destined to 192.168.100.1 will be discarded for exactly 9 minutes. The exhibit references monitoring and hold-down behavior, but the answer key rejects the fixed "9 minutes" traffic-discard statement. The key concept is that duplicate handling protects the EVPN service from unstable or conflicting IP/MAC bindings, but the specific discard duration in option D is not correct. Reference: proxy ARP, IP duplication monitoring, duplicate-state blackhole behavior.
NEW QUESTION # 52
When providing L3 multi-homing on two or more leaf routers, which of the following is FALSE?
Answer: D
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
Layer 3 multi-homing is fundamentally about redundant or load-balanced L3 reachability for external prefixes, not about Layer 2 broadcast-domain flooding toward a host. In single-active L3 multi-homing, DF election determines which attached leaf is active for the Ethernet Segment, and only that leaf advertises or forwards for the attached customer route as required by the redundancy model. In all-active L3 multi-homing, multiple leaf routers can be valid next-hops for the same learned third-party prefix, and remote PEs may load-balance toward them based on the Ethernet Segment association. Learned external prefixes are carried as EVPN route type 5 IP Prefix routes, which is the correct route type for L3 reachability. The Ethernet Segment is associated with the next-hop for those prefixes so that remote PEs understand the multi-homed nature of the path. Option B is false because BUM forwarding is a Layer 2 EVPN concern. In an all-active L3 multi-homing scenario, DF election is not used to identify a BUM-forwarding leaf for host traffic in the same way it is used in Layer 2 multi-homing services. Reference: L3 EVPN multi-homing, RT-5 prefix routes, ES next-hop behavior.
NEW QUESTION # 53
Consider the exhibit.
All three of the leafs have a MP-BGP EVPN session to the route-reflector Spine-1. Leaf-1, Leaf-2 and Leaf-3 have existing instances of an L2 EVPN named MAC VRF-1. Host-1 has just sent its first Ethernet frame into MAC VRF-1 on Leaf-1.
Which of the following steps is FALSE?
Answer: A
Explanation:
Comprehensive and Detailed 150 to 250 words of Explanation From [SR Linux EVPN and Data Center Interconnect/Course Guide/topics]:
When Host-1 sends its first Ethernet frame into MAC VRF-1, Leaf-1 performs normal local data-plane MAC learning on the access interface and installs Host-1's MAC address into the MAC forwarding table. In an L2 EVPN MAC-VRF, host MAC reachability is then advertised into the EVPN control plane using EVPN route type 2, the MAC/IP Advertisement route. Route type 5 is not used for host MAC advertisement; RT-5 is used for IP prefix advertisement in Layer 3 EVPN services. Therefore, option B is false because it incorrectly states that Leaf-1 generates an EVPN RT-5 update with the host MAC address. In this topology, Leaf-1 sends the correct EVPN update to the route reflector, Spine-1. The route reflector then reflects the update to Leaf-2 and Leaf-3, and those remote leaves import the route if the route target matches their MAC VRF-1 import policy. The route target controls service membership, ensuring that only PEs participating in the same EVPN instance import the MAC route. Reference: L2 EVPN MAC learning, RT-2 MAC/IP advertisement, route-reflector distribution, route-target import.
NEW QUESTION # 54
......
The Nokia 4A0-D03 certification exam helps you in getting jobs easily. ValidDumps offers real 4A0-D03 exam questions so that the students can prepare in a short time and crack the 4A0-D03 exam with ease. These 4A0-D03 Exam Questions are collected by professionals by working hard for days and nights so that the customers can pass 4A0-D03 certification exam with good scores.
4A0-D03 Exam Review: https://www.validdumps.top/4A0-D03-exam-torrent.html