Please believe that our company is very professional in the research field of the H19-404_V1.0 study materials, which can be illustrated by the high passing rate of the examination. Despite being excellent in other areas, we have always believed that quality and efficiency should be the first of our H19-404_V1.0 study materials. For study materials, the passing rate is the best test for quality and efficiency. There may be some other study materials with higher profile and lower price than our products, but we can assure you that the passing rate of our H19-404_V1.0 Study Materials is much higher than theirs.
| Section | Objectives |
|---|---|
| Campus SD-WAN Planning and Design | - SD-WAN Solutions
|
| Campus WLAN Planning and Design | - WLAN Technologies
|
| Pre-sales Methodology and Solution Presentation | - Pre-sales Skills
|
| Industry Scenario Solution Design | - Industry-Oriented Campus Solutions
|
| Campus Network Security Design | - Security Planning
|
| Huawei Campus Network Products and Solutions | - Campus Network Product Portfolio
|
| Campus Network Solution Architecture and Design | - Enterprise Campus Network Architecture
|
| CloudCampus and Intelligent Campus Solutions | - CloudCampus Architecture
|
Do you have tried the H19-404_V1.0 online test engine? Here we will recommend the H19-404_V1.0 online test engine offered by Itbraindumps for all of you. Firstly, H19-404_V1.0 online training can simulate the actual test environment and bring you to the mirror scene, which let you have a good knowledge of the actual test situation. Secondly, the H19-404_V1.0 online practice allows self-assessment, which can bring you some different experience during the preparation. You can adjust your H19-404_V1.0 study plan according to the test result after each practice test.
NEW QUESTION # 30
Which of the following are Target Wake Time (TWT) technologies?
Answer: A,B,C
Explanation:
Broadcast TWT, Individual TWT, and Implicit TWT are valid Target Wake Time concepts. Individual TWT establishes a wake schedule between an AP and a specific station. Broadcast TWT advertises scheduling information that multiple stations can use, reducing individual negotiation overhead and coordinating groups of devices. An implicit TWT agreement defines a repeating schedule in which subsequent wake times are calculated from the agreed wake interval instead of being renegotiated for every service period.
These mechanisms allow stations, particularly battery-powered IoT devices, to sleep for predictable periods and wake only when transmission or reception is scheduled. TWT consequently reduces power consumption, channel contention, collisions, and unnecessary medium access in dense WLAN environments. Research describing IEEE 802.11ax TWT confirms that the mechanism schedules station transmission periods and allows stations to remain asleep outside their negotiated service periods.
"Multicast TWT" is not one of the standard TWT concepts represented by this question. Broadcast scheduling can cover multiple stations, but that does not create a separate mechanism formally identified here as Multicast TWT. Therefore, the correct answers are A, B, and C.
NEW QUESTION # 31
How many ports can a 400GE card offer on the CloudEngine S16700 series next-generation flagship core switches?
Answer: C
Explanation:
A high-density 400GE service card for the CloudEngine S16700 series can provide 18 ports. The S16700 is positioned as a next-generation flagship campus core switch designed for ultra-high-capacity aggregation, large-scale Wi-Fi backhaul, data-center interconnection, and long-term bandwidth evolution.
An 18-port 400GE card provides a theoretical aggregate port rate of 7.2 Tbit/s in each direction before considering the switching fabric's internal architecture and forwarding design. This density allows a single chassis slot to aggregate numerous high-speed distribution switches, connect multiple campus fabrics, or provide high-bandwidth links toward data centers and service platforms. It also reduces the number of cards and chassis required compared with lower-density 8-port, 12-port, or 16-port alternatives.
The question asks specifically for the number of physical 400GE interfaces offered by the card, not the entire chassis capacity or the number of ports after breakout. Under the H19-404 product-portfolio specification represented by this question, the correct density is 18 native 400GE ports. Therefore, option B is correct.
NEW QUESTION # 32
What are the two IPsec data encapsulation modes?
Answer: C,D
Explanation:
The two IPsec encapsulation modes are transport mode and tunnel mode. In transport mode, IPsec protects the upper-layer payload of the original IP packet while retaining the original IP header as the packet's outer header. It is commonly associated with end-to-end host communication, although it can also protect a GRE packet between tunnel endpoints.
In tunnel mode, IPsec protects the complete original IP packet and adds a new outer IP header containing the addresses of the IPsec peers. This mode is commonly used between security gateways, routers, or site-to-site VPN endpoints because the original source and destination information can be protected within the encrypted inner packet. RFC 4301 formally defines transport and tunnel as the two IPsec security-association modes.
AH and ESP are not encapsulation modes. They are IPsec security protocols. Authentication Header provides integrity and source authentication but not encryption. Encapsulating Security Payload can provide encryption, integrity, authentication, and anti-replay protection. Either protocol can conceptually operate in transport or tunnel mode, although ESP is overwhelmingly used for encrypted enterprise VPN and SD-WAN data channels.
NEW QUESTION # 33
Which solution can be used when users need to centrally control and manage Internet access traffic but do not have the required security-processing capability?
Answer: D
Explanation:
Professional security devices should be deployed at the headquarters or another centralized Internet-access site. Under centralized Internet access, branch Internet traffic is first carried through the SD-WAN overlay to the centralized gateway. The headquarters security infrastructure then performs access control and security inspection before forwarding the traffic to the Internet.
This approach is appropriate when branch CPEs lack sufficient processing capacity or advanced security functions. A centralized firewall or dedicated security platform can provide intrusion prevention, antivirus inspection, URL filtering, application control, content security, and unified logging. It also allows the enterprise to enforce one consistent security policy instead of maintaining separate advanced configurations at every branch.
Deploying advanced security capabilities on each CPE, as proposed in option C, is a distributed local- breakout design and does not satisfy the stated limitation concerning security-processing capability. Third- party cloud security services can be used in some site-to-cloud or secure Internet-access architectures, but they are not the intended headquarters-based centralized solution in this question.
Huawei explicitly states that centralized Internet traffic is diverted to the centralized access site and that the firewall function is deployed there to secure Internet services. Therefore, option D is correct.
NEW QUESTION # 34
Which of the following statements are true about selecting network access authentication points?
Answer: A,C,D
Explanation:
Authentication points should generally be placed on access devices close to the terminals. For wireless users, the AP or WLAN access device is the natural admission point because it directly controls the station's wireless association and service access. For wired users, the access switch directly connects the endpoint and can enforce 802.1X, MAC-address authentication, VLAN authorization, ACLs, and security-group policies.
Huawei recommends access devices as authentication points for employees and specifically recommends access switches as authentication points for wired dumb terminals using MAC-address authentication.
Deploying enforcement close to endpoints prevents unauthenticated or unauthorized traffic from traversing deeper into the campus network. It also improves fault isolation, policy granularity, and scalability because admission processing is distributed across access devices.
Option A is incorrect. A centralized authentication point can simplify configuration and policy management, but it does not inherently provide higher performance. It can create concentrated processing pressure, enlarge the Layer 2 scope, and allow unauthenticated traffic to travel farther before being evaluated. Therefore, the recommended principles are represented by B, C, and D.
NEW QUESTION # 35
......
With H19-404_V1.0 study engine, you will get rid of the dilemma that you work hard but cannot improve. With our H19-404_V1.0 learning materials, you can spend less time but learn more knowledge than others. H19-404_V1.0 exam questions will help you reach the peak of your career. Just think of that after you get the HCSE-Presales-Campus Network Planning and Design V1.0 H19-404_V1.0 Certification, you will have a lot of opportunities of going to biger and better company and getting higher incomes!
H19-404_V1.0 Practice Exams Free: https://www.itbraindumps.com/H19-404_V1.0_exam.html