Fortinet NSE6_EDR_AD-7.0덤프구매에 관심이 있는데 선뜻 구매결정을 하지 못하는 분이라면 사이트에 있는 demo를 다운받아 보시면Fortinet NSE6_EDR_AD-7.0시험패스에 믿음이 생길것입니다. Fortinet NSE6_EDR_AD-7.0덤프는 시험문제변경에 따라 업데이트하여 항상 가장 최선버전이도록 유지하기 위해 최선을 다하고 있습니다.
| Section | Objectives |
|---|---|
| Topic 1: Installation and Deployment | - Server and console installation requirements - Agent deployment and onboarding |
| Topic 2: FortiEDR Architecture and Components | - System architecture and deployment models - FortiEDR components overview (agents, management console, collectors) |
| Topic 3: Forensics and Investigation | - Endpoint investigation workflows - Event analysis and telemetry review |
| Topic 4: Policy Configuration and Management | - Policy tuning and exclusions - Prevention and detection policies |
| Topic 5: System Administration and Troubleshooting | - Troubleshooting common FortiEDR issues - System monitoring and health checks |
| Topic 6: Threat Detection and Response | - Incident detection and alert handling - Automated response actions and remediation |
Fortinet인증NSE6_EDR_AD-7.0시험을 패스함으로 취업에는 많은 도움이 됩니다. ITDumpsKR는Fortinet인증NSE6_EDR_AD-7.0시험패스로 꿈을 이루어주는 사이트입니다. 우리는Fortinet인증NSE6_EDR_AD-7.0시험의 문제와 답은 아주 좋은 학습자료로도 충분한 문제집입니다. 여러분이 안전하게 간단하게Fortinet인증NSE6_EDR_AD-7.0시험을 응시할 수 있는 자료입니다.
질문 # 23
Which two Python commands are supported when using FortiEDR Connect to directly access a protected device shell? (Choose two answers)
정답：B,C
설명：
The correct answers are A. %upload_file and B. %ipconfig_all .
The FortiEDR 7.0.0 Administration Guide states that FortiEDR Connect opens a console that provides direct access to a FortiEDR-protected device through a remote shell connection. This allows administrators to respond to incidents, run commands and scripts, collect and download forensic data, and remediate threats.
The guide also states that the FortiEDR Connect terminal has a prompt where commands can be typed, and the Help button displays the supported commands and their parameters.
The guide further confirms that FortiEDR Connect supports FortiEDR-specific commands, Windows command-line access through %cmd , and Python commands.
For the exact command list, Fortinet's official FortiEDR Connect technical tip lists the supported commands.
In that list, %ipconfig_all is explicitly described as returning extended IP information, and %upload_file is explicitly described as uploading a file to the specified path. ( Fortinet Community ) Options C. %psexec and D. %timestamp are not listed as supported FortiEDR Connect commands in the official Fortinet command list. Therefore, they must not be selected.
=========
=========
질문 # 24
A playbook is configured with two actions: terminate process and isolate device. The terminate process action fails because the process is protected by Windows. What is the expected behavior for the second action, isolate device? (Choose one answer)
정답：C
설명：
The correct answer is D .
The FortiEDR guide confirms that Playbook actions are automatic incident response actions configured under Security Settings > Playbooks and applied based on security event classification. It also confirms that actions such as Terminate Process and device isolation actions can be configured as playbook responses. For scheduled-query-triggered events, the guide states that FortiEDR can automatically apply the Playbook action assigned to the Collector Group that the triggering device belongs to.
For isolation, the guide shows that isolation actions such as Isolate device with NAC are configured under the Investigation section of Playbooks, and similar isolation actions are triggered automatically when selected for the relevant classification.
The uploaded guide does not provide a specific line saying "if terminate process fails, continue to the next action." Based on FortiEDR playbook behavior, configured actions are executed independently. A failure to terminate a protected Windows process does not automatically cancel the remaining playbook actions.
Therefore, the next configured action, isolate device , is still executed.
Options A , B , and C are wrong because the playbook does not pause for administrator intervention, does not stop merely because an email is generated, and does not cancel all remaining configured actions because one action failed.
=========
질문 # 25
Refer to the Exhibit:
Based on the incident details shown in the exhibit, which two statements about this incident are true? (Choose two answers)
정답：B,C
설명：
The correct answers are A and C .
The exhibit shows an audit/response action stating that IP address 74.125.235.20 was added to malicious IP addresses on firewall FortiGate . This matches the FortiEDR playbook action Block address on Firewall .
The guide states that this action ensures connections to remote malicious addresses associated with the security event are blocked, and that a firewall connector must already be configured for this action. It also explains that a checkmark in a classification column means communication with the affected destination is automatically blocked when a security event with that classification is triggered.
Option C is the second best answer because FortiEDR events are initially classified by FortiEDR detection logic/Core, and the guide states that classifications are initially determined by the Core but can later be changed automatically by FortiEDR Cloud Service or manually. The exhibit shows "Classification Changed To: Suspicious (By Fortinet)" , but it does not say the event was manually classified by an administrator. So the event classification process is FortiEDR-driven, with later Fortinet/FCS-style automatic classification possible.
Option B is wrong. The exhibit shows one raw-data row with device cwinserv-32 +2 , which indicates more than one affected device/raw item is represented in the aggregation. So it did not occur on only one device.
Option D is wrong because the incident rows clearly show Unhandled . The guide states that security events are initially marked as unread and unhandled, and the unread/unhandled status helps users track whether anyone has read and handled the event.
=========
질문 # 26
Refer to the exhibits.
What happens when the net user command runs on an endpoint? (Choose one answer)
정답：C
설명：
The correct answer is C .
The exhibit shows a Threat Hunting saved query named CLI Command with the query:
Target.Process.Filename ( " net.exe " )
It is configured as a Scheduled Query , classified as Suspicious , and set to repeat every 15 minutes . The FortiEDR guide states that saving a Threat Hunting query allows it to be defined as a scheduled query to automate threat detection. When the scheduled query runs and detects matching activity, a security event is automatically created in the Incidents tab .
The guide also states that scheduled queries run automatically according to the configured schedule, and each time a match is detected, FortiEDR generates a security event in the Incidents tab and sends notifications according to the security event configuration.
So, when the endpoint runs:
net user edruser password! /ADD
FortiEDR records the relevant process activity, and when the scheduled query runs, it matches the target process net.exe and creates an incident/security event. It is not immediate by default because the query is scheduled every 15 minutes. It also does not block CLI commands by default unless playbook actions or policy controls are configured. The activity is treated according to the saved query classification, which in the exhibit is Suspicious .
=========
질문 # 27
You added three new applications to FortiEDR using only the Path attribute. What are two expected outcomes of this configuration? (Choose two answers)
정답：C,D
설명：
The correct answers are A and B .
The FortiEDR 7.0.0 Administration Guide states that newly added applications are disabled by default , which means they are not blocked unless enabled. The guide further explains that the default state can be changed by enabling the Enable Default application state option in the Application Control Manager settings. Therefore, option A is correct.
Option B is also correct because Application Control allows an application to be defined by Hash or by any combination of File Name / Path / Signer . The guide says that the Path field specifies the path to the executable file of the application to be blocked. When using path-based matching, the enforcement is tied to the specified path criteria, not to every possible location of the same file.
Option C is wrong because the file name does not also need to match when only the Path attribute is used.
Option D is wrong because blocking all instances regardless of location applies when only the File Name field is used, not when the match is path-specific. The guide explicitly states that if only the File Name field is filled, the application is blocked no matter where the executable appears.
질문 # 28
......
IT국제공인자격증Fortinet NSE6_EDR_AD-7.0시험대비덤프를 제공하는 전문적인 사이트로서 회원님의 개인정보를 철저하게 보호해드리고 페이팔을 통한 결제라 안전한 결제를 진행할수 있습니다. Fortinet NSE6_EDR_AD-7.0 덤프외에 다른 인증시험덤프에 관심이 있으신 분은 온라인 서비스를 클릭하여 문의해주세요.
NSE6_EDR_AD-7.0시험패스 인증덤프: https://www.itdumpskr.com/NSE6_EDR_AD-7.0-exam.html