DOWNLOAD the newest itPass4sure VNX301 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=15SnZDOkKsPMhuIKfrL9NFBKUDNx67_Rt
No doubt the Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification is one of the most challenging certification exams in the market. This Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification exam gives always a tough time to Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam candidates. The itPass4sure understands this hurdle and offers recommended and real Versa Networks VNX301 Exam Practice questions in three different formats. These formats hold high demand in the market and offer a great solution for quick and complete Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam preparation.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
The VNX301 web-based practice exam requires no installation so you can start your preparation instantly right after you purchase. With thousands of satisfied customers around the globe, questions of the Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam dumps are real so you can pass the Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification on the very first attempt. Hence, it reduces your chances of failure and you can save money and time as well. Versa Networks exam questions come in three formats i.e., web-based practice test, desktop practice test software, and PDF dumps.
NEW QUESTION # 35
Examine the exhibit below.
The exhibit shows a device group created for a new group of hubs. The device template called "BMBF- TEMPLATE" has an Address object called "Server". A network administrator creates the Class of Service Template called "Ship-CoS-IT" that has an Address object with the same name. Then it tries to onboard a new device to this device group.
Which statement is true about the configuration that this device will have?
Answer: C
Explanation:
The correct answer is D . In the displayed post-staging template association order, the device template BMBF- TEMPLATE is applied before the QoS service template Ship-CoS-IT . Versa documentation explains that device templates, also called post-staging templates, provide the baseline configuration for devices, while service templates are service-specific configurations that can be applied to device configurations. It also states that service templates are associated with device groups and that, in a device group, the administrator can choose the order in which service templates are applied.
Because the QoS template is later in the shown association order, the final merged device configuration uses the Address object definition from the QoS template when the same object name exists in both templates. It does not automatically create two copies of the same Address object, because the object name is the key for the configuration element. It also should not fail merely because the same object name exists in a later template; the merge behavior resolves the effective configuration according to the template order. Therefore, the onboarded hub device receives the Server Address object version from Ship-CoS-IT, the QoS template.
NEW QUESTION # 36
You are onboarding a branch with one WAN and one LAN interface. After a successful branch activation, the branch is not able to reach the Versa Controller. You realize that the WAN gateway IP address originally entered under the Device Bind Data menu in Versa Director is incorrect. Which action will you perform to solve the problem?
Answer: D
Explanation:
The correct action is to update the WAN gateway IP address in Device Bind Data and onboard the branch appliance again. Device Bind Data supplies site-specific values, such as WAN interface addressing and gateway information, that are merged with the workflow and template configuration during onboarding. If the wrong WAN gateway is entered, the branch may activate successfully from a workflow perspective, but the resulting WAN routing configuration is incorrect. As a result, the branch cannot establish proper transport reachability to the Controller. Versa troubleshooting documentation explains that, after establishing transport connectivity from a branch to a Controller, at least one WAN interface must be available, and the branch then establishes IKE-based IPsec connectivity to the Controller. If that IKE/IPsec connectivity fails, the Controller- facing ptvi interface remains down.
Changing the configuration only from the Appliance context is not the best answer because the incorrect value originated in the bind-data source used for provisioning. Modifying it manually from the branch CLI is also not recommended because the device is managed by Versa Director and template-driven configuration. Resetting the device does not automatically discover or "ping" the correct gateway. The correct remediation is to fix the bind data and repeat onboarding so the branch receives the correct generated configuration.
NEW QUESTION # 37
A branch using DIA with CGNAT reports that new internet sessions intermittently fail. CGNAT pool counters show increasing out-of-ports errors, while out-of-address errors remain zero. What is the most likely problem?
Answer: A
Explanation:
The correct answer is A . Versa CGNAT troubleshooting documentation includes per-pool and resource counters that show allocation behavior and failures. The counters include values such as bindings allocated, bindings freed, allocation failures, out-of-address errors, and out-of-ports errors. It also shows that CGNAT source-port resources are divided and distributed to worker threads by Versa RFD/RFM, and that allocated source-port ranges can be viewed using show rfm table src-port allocated.
If out-of-ports errors increase while out-of-address errors remain zero, the pool still has usable translated IP addresses, but the available port resource for NAT bindings is exhausted. This commonly occurs when too many concurrent sessions share a limited public IP or source-port range. The corrective action would be to expand the NAT resource, add more public translated IPs, adjust port allocation, or reduce excessive session usage.
A missing NAT IP pool would more likely produce out-of-address problems. A wrong zone match might prevent translation entirely, and OSPF in the LAN VR is unrelated to CGNAT port-resource exhaustion.
NEW QUESTION # 38
A VOS branch has two WAN circuits. You suspect the configured transport domain mapping is wrong because one link is not building the expected SD-WAN path. Which VSM control-plane command is most useful to check local WAN circuit information, transport domains, NAT status, and local tunnel-site details?
Answer: C
Explanation:
The correct answer is A . Versa SD-WAN data-path troubleshooting documentation instructs administrators to connect to the VSM control plane with vsh connect vsmd and then use show vsm p2mp local-tunnel-sites 0 to check the status of local site objects. The example output includes the local site key, neighbor IP, site type, site name, branch ID, tenant ID, and detailed WAN link information. It also shows fields such as WAN local VRF ID, WAN local link name, circuit information, link ID, behind-NAT status, shaping rate, public and private addresses, link flags, transport domain, and SLA interval.
This command is therefore highly relevant when validating whether the local SD-WAN site has learned and built the correct WAN transport objects for overlay tunnel creation. If a circuit is mapped to the wrong transport domain or has incorrect NAT/public/private address state, the local-tunnel-site output is one of the best places to confirm it.
The other commands are useful for software version, CGNAT summary, or CPU usage, but they do not show the detailed SD-WAN local tunnel-site transport mapping.
NEW QUESTION # 39
Examine the exhibit below.
Spoke1 and Spoke2 are part of Spoke-to-Hub-Only spoke group, the hub is advertising a default route to both the spokes.
Referring to the exhibit, which statement is true?
Answer: B
Explanation:
In Versa SD-WAN, a Spoke-to-Hub-Only topology is specifically designed for deployments where spoke branches communicate only with hub resources and not with other spokes. Versa's SD-WAN design documentation states that in a spoke-to-hub-only topology, the default behavior is that only hub routes are advertised, and spoke routes are not re-advertised by the hub branch. It also explains that this topology is used when spokes do not have to communicate with each other.
Even though the hub in the exhibit advertises a default route, that does not change the topology behavior into spoke-to-spoke communication. The default route can attract unknown traffic from the spokes toward the hub, but the Spoke-to-Hub-Only policy prevents the spoke prefixes from being redistributed or imported in a way that allows spoke-to-spoke reachability. Versa documentation further shows that spoke routes are filtered using BGP communities and import policies, and that the spoke route table contains only destinations behind the hubs, not other spoke routes.
NEW QUESTION # 40
......
We should use the most relaxed attitude to face all difficulties. Although Versa Networks VNX301 exam is very difficult, but we candidates should use the most relaxed state of mind to face it. Because itPass4sure's Versa Networks VNX301 exam training materials will help us to pass the exam successfully. With it, we would not be afraid, and will not be confused. itPass4sure's Versa Networks VNX301 Exam Training materials is the best medicine for candidates.
New VNX301 Exam Pdf: https://www.itpass4sure.com/VNX301-practice-exam.html
P.S. Free & New VNX301 dumps are available on Google Drive shared by itPass4sure: https://drive.google.com/open?id=15SnZDOkKsPMhuIKfrL9NFBKUDNx67_Rt