BONUS!!! Download part of Exam4Labs NSE5_FSW_AD-7.6 dumps for free: https://drive.google.com/open?id=1mSVNVZ9DKDHEE2op9mJbsNA7la-RGcRV
It's better to hand-lit own light than look up to someone else's glory. Exam4Labs Fortinet NSE5_FSW_AD-7.6 exam training materials will be the first step of your achievements. With it, you will be pass the Fortinet NSE5_FSW_AD-7.6 Exam Certification which is considered difficult by a lot of people. With this certification, you can light up your heart light in your life. Start your new journey, and have a successful life.
| Certification Vendor: | Fortinet |
|---|---|
| Exam Name: | Fortinet NSE 5 - FortiSwitch 7.6 Administrator |
| Exam Number: | NSE5_FSW_AD-7.6 |
| Available Languages: | English |
| Exam Price: | $200 USD |
| Passing Score: | Pass / Fail |
| Real Exam Qty: | 35-40 |
| Exam Duration: | 70 minutes |
| Related Certifications: | Fortinet Certified Professional (FCP) - Secure Networking |
| Exam Format: | Multiple Choice, Scenario-Based Items, Configuration Reasoning |
| Sample Questions: | Fortinet NSE5_FSW_AD-7.6 Sample Questions |
| Exam Way: | Pearson VUE |
| Pre Condition: | None specified |
| Official Syllabus URL: | https://training.fortinet.com/local/staticpage/view.php?page=library_fortiswitch |
>> NSE5_FSW_AD-7.6 Exam Cram Review <<
In order to meet different needs of our customers, we offer you three versions of NSE5_FSW_AD-7.6 study materials for you. Each version has its own advantages, and you can choose the most suitable one according to your own needs. NSE5_FSW_AD-7.6 PDF version is printable, and if you like paper one, you can choose this version. NSE5_FSW_AD-7.6 soft test engine can stimulate the real exam environment, and you can build your confidence if you choose this version. NSE5_FSW_AD-7.6 Online test engine can practice offline and can record the training process, if you have the needs like this, you can choose this version.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 42
Which Ethernet frame can create Layer 2 flooding due to all bytes on the destination MAC address being set to all FF?
Answer: D
Explanation:
Layer 2 flooding caused by Ethernet frames with all bytes in the destination MAC address set to FF refers to broadcast frames.Here's why:
* Broadcast Ethernet Frame (A):
* Address Specification:In Ethernet networking, a broadcast frame has a destination MAC address ofFF:FF:FF:FF:FF:FF, which instructs network devices to forward the frame to all devices within the broadcast domain.
* Network Behavior:This causes Layer 2 flooding as the frame is sent to all ports in the VLAN, except the originating port, ensuring that the broadcast reaches all network segments.
* Other Frame Types:
* Unicast (B)targets a single device.
* Multicast (C)targets a group of devices.
* Anycast (D)is not used in Ethernet but rather in IP-based routing to route to the nearest of multiple destinations, typically in internet addressing.
References:You can find more information about Ethernet frame types in networking textbooks or documentation that discusses network layer interaction:Network Theory Books
NEW QUESTION # 43
Refer to the diagnostic output:
Two entries in the exhibit show that the same MAC address has been used in two different VLANs. Which MAC address is shown in the above output?
Answer: C
Explanation:
The MAC address " 00:50:56:96:e3:fc " appearing in two different VLANs (4089 and 4094) in the diagnostic output indicates it is a MAC address associated with a device that supports traffic from multiple VLANs.
Such a behavior is typical of network infrastructure devices like switches or routers, which are configured to allow traffic from various VLANs to pass through a single physical or logical interface. This is essential in network designs that utilize VLANs to segregate network traffic for different departments or use cases while using the same physical infrastructure.
References:
For more detailed information on MAC table diagnostics and VLAN configurations in FortiGate devices, refer to the official Fortinet documentation:Fortinet Product Documentation.
NEW QUESTION # 44
(Full question statement start from here)
A FortiGate is connected to a pair of FortiSwitch devices.
For redundancy, FortiGate must use uplinks on both switches simultaneouslywithout depending on Spanning Tree Protocol (STP).
Which configuration is required? (Choose one answer)
Answer: B
Explanation:
In FortiSwitchOS 7.6, achieving link-level redundancy and active-active uplink utilization acrosstwo separate FortiSwitch unitsrequires a technology that operates independently of Spanning Tree Protocol (STP). This requirement is fulfilled byMultichassis Link Aggregation Group (MCLAG).
MCLAG allows two FortiSwitch devices to operate as alogical aggregation peer, presenting themselves as a single logical switch to an upstream device such as a FortiGate. With MCLAG, FortiGate can form a single LACP-based aggregated interfacethat spans both FortiSwitches. This enablessimultaneous use of uplinks on both switches, providing full bandwidth utilization and redundancy without blocking links, which is a fundamental limitation of STP-based designs.
According to the FortiSwitchOS 7.6 Administrator Guide, MCLAG synchronizes control-plane information between the two FortiSwitch peers using inter-switch links (ISLs) and dedicated keepalive mechanisms. This ensures consistent forwarding behavior and loop-free topology while allowing all member links to remain active. If one FortiSwitch fails, traffic continues to flow through the remaining switch with minimal disruption.
The other options do not meet the stated requirement. A standard LAG (Option D) operates only within a single switchand cannot span multiple FortiSwitch units. Multi-tier topology (Option A) and full mesh HA (Option C) describe architectural layouts or FortiGate HA concepts but do not provide link-level aggregation across switches.
Therefore, the only configuration that allows FortiGate to use uplinks on both FortiSwitches simultaneously without relying on STPisMultichassis Link Aggregation Group (MCLAG), makingOption Bthe correct and fully verified answer.
NEW QUESTION # 45
Which statement best describes a benefit of using MAC, IP address, or protocol-based VLAN assignments on FortiSwitch? (Choose one answer)
Answer: D
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, MAC- based, IP-based, and protocol-based VLAN assignments are methods ofdynamic VLAN assignment. These features allow the switch to categorize incoming traffic and assign it to a specific VLAN based on the packet's attributes rather than just the physical port it is connected to.3 The primary benefit of these methods is that theyoffer dynamic segmentation benefits similar to 802.1X authentication (Option D). In a modern network, devices with different security requirements (such as IoT devices, printers, and workstations) often connect to the same physical switch ports. 802.1X is the "gold standard" for dynamic segmentation but requires a supplicant on the client device.4For devices that do not support 802.1X, MAC or protocol-based assignments provide a similar result: they ensure the device is automatically placed into its designated secure segment (VLAN) the moment it is identified by the switch.
* MAC-based:Assigns a VLAN based on the source MAC address.
* IP-based:Assigns a VLAN based on the source IP address or subnet.
* Protocol-based:Assigns a VLAN based on the Ethernet type (e.g., IPv4, IPv6, or AppleTalk).
Option A is incorrect because these features complement rather than "disable" 802.1X. Option B is incorrect because these specific assignment types can be configured locally on the switch without a RADIUS server.
Option C is the opposite of how these features work, as they explicitly look at the device type or traffic to make an assignment.
NEW QUESTION # 46
Refer to the exhibit.
The LLDP profile shown in the exhibit was configured to detect IP phones and automatically assign them to the appropriate VLAN. You apply this LLDP profile on a FortiSwitch port. Which configuration should you enable on the FortiSwitch profile to collect detailed information about all the connected IP phones? (Choose one answer)
Answer: A
Explanation:
According to theFortiSwitchOS 7.6 Administration Guideand theFortiSwitch 7.6 Study Guide, Link Layer Discovery Protocol-Media Endpoint Discovery (LLDP-MED) is an enhancement to standard LLDP that provides advanced discovery and configuration for endpoints li1ke IP phones. While the current configuration in the exhibit correctly handlesNetwork Policy TLVsto advertise QoS2and VLAN settings to the phones, it is missing the specific component required for data collection.34 To coll5ect detail6ed information such as themanufacturer, software version, hardware version, and serial or asset numbers, you mustEnable LLDP-MED inventory management TLVs (Option C). The documentation specifies that when the inventory-management TLV is active, the switch can retrieve these extensive device characteristics from the connected Media Endpoints. This information is then visible to the administrator through the FortiGate or FortiSwitch monitoring tools, providing a complete hardware inventory of the voice network.
Regarding the other options:Option Ais unnecessary because a single LLDP profile can support multiple TLV types simultaneously by adding them to the med-tlvs string.Option Bis already partially implemented in the exhibit's network policy but does not contribute to device detection or data collection.Option Dis used for automatic trunking between FortiSwitches and is unrelated to endpoint device information. Therefore, the addition of the inventory-management TLV is the specific requirement to fulfill the goal of collecting detailed IP phone data.
NEW QUESTION # 47
......
NSE5_FSW_AD-7.6 Examinations Actual Questions: https://www.exam4labs.com/NSE5_FSW_AD-7.6-practice-torrent.html
What's more, part of that Exam4Labs NSE5_FSW_AD-7.6 dumps now are free: https://drive.google.com/open?id=1mSVNVZ9DKDHEE2op9mJbsNA7la-RGcRV