H35-580_V2.0최신인증시험덤프데모 & H35-580_V2.0최신버전공부자료

Fast2test는IT업계전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다. 우리는 꼭 한번에Huawei H35-580_V2.0시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은Huawei H35-580_V2.0시험자료 구매로 제일 정확하고 또 최신시험버전의 문제와 답을 사용할 수 있습니다. Pass4Tes의 인증시험적중 율은 아주 높습니다. 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다.

Huawei H35-580_V2.0 Exam Syllabus Topics:

SectionObjectives
Radio Network Planning (RNP)- Capacity planning and dimensioning
- Site selection and parameter planning
- Coverage planning principles
5G Performance and Troubleshooting- Drive test and data analysis
- Fault diagnosis and optimization methods
Radio Network Optimization (RNO)- KPI monitoring and analysis
- Mobility optimization (handover, cell reselection)
- Coverage and interference optimization
5G Fundamentals- 5G network architecture and key concepts
- 5G NR principles and key technologies

>> H35-580_V2.0최신 인증시험 덤프데모 <<

H35-580_V2.0최신 인증시험 덤프데모 인기시험 기출문제모음

Fast2test 의 IT전문가들이 자신만의 경험과 끊임없는 노력으로 최고의 Huawei H35-580_V2.0학습자료를 작성해 여러분들이Huawei H35-580_V2.0시험에서 패스하도록 최선을 다하고 있습니다. 덤프는 최신 시험문제를 커버하고 있어 시험패스율이 높습니다. Huawei H35-580_V2.0시험을 보기로 결심한 분은 가장 안전하고 가장 최신인 적중율 100%에 달하는Huawei H35-580_V2.0시험대비덤프를 Fast2test에서 받을 수 있습니다.

최신 HCIA-5G H35-580_V2.0 무료샘플문제 (Q16-Q21):

질문 # 16
Which of the following SI messages must be read on a 5G network?

정답：B

설명：
Explanation
According to the 5G SIB Messages, SIB1 is the only mandatory SI message that must be read on a 5G network. SIB1 contains essential information for accessing the network, such as cell identity, cell barring, and scheduling information for other SI messages. SIB2, SIB3, and SIB4 are optional SI messages that provide additional information such as radio resource configuration, intra-frequency cell reselection, and neighboring cell information.


질문 # 17
In RAN3.0 version, for TDD 5G network, only Case C SSB beam pattern is supported.

정답：A

설명：
According to the RAN3.0 feature set, TDD NR deployment supports only the Case C SSB beam pattern configuration.


질문 # 18
Which of the following problems may cause SCTP link disconnection over the N2 interface?(Select All that Apply)

정답：A,B,C,D

설명：
Explanation
According to the Troubleshooting Guide for Huawei 5G Base Stations, the possible causes of SCTP link disconnection over the N2 interface are as follows:
Routes are not configured: If the routes between the base station and the core network are not configured correctly, the SCTP link cannot be established or may be disconnected.
PLMN configurations are incorrect: If the PLMN configurations on the base station and the core network do not match, the SCTP link cannot be established or may be disconnected.
Physical ports are faulty: If the physical ports on the base station or the core network are faulty, such as damaged cables, loose connectors, or port errors, the SCTP link cannot be established or may be disconnected.
The SCTP port configuration is incorrect: If the SCTP port configuration on the base station or the core network is incorrect, such as using a reserved port number or a conflicting port number, the SCTP link cannot be established or may be disconnected.


질문 # 19
Which of the following is not a typical application scenario of massive MIMO?

정답：C

설명：
Explanation
Massive MIMO is a technology that uses a large number of antennas at the base station to serve multiple users simultaneously, thereby increasing the spectral efficiency and capacity of the wireless system 1. Massive MIMO is especially suitable for application scenarios where there is high user density and high traffic demand, such as large venues, high-rise buildings, and densely populated urban areas 2. Suburban areas with light traffic do not have such high requirements for spectral efficiency and capacity, and therefore are not a typical application scenario of massive MIMO.


질문 # 20
In the SIB1 message, if the expected preamble power is -100 dBm, the SSB transmit power is 18 dBm, and the current RSRP is -90 dBm, what is the preamble transmit power of the first PRACH of the terminal?

정답：C

설명：
The initial PRACH preamble power is calculated as:
Preamble Power = PreambleReceivedTargetPower + Path Loss
Path Loss = SSB Tx Power - RSRP
= 18 - (-90) = 108 dB
Preamble Power = -100 + 108 = 8 dBm


질문 # 21
......

꿈을 안고 사는 인생이 멋진 인생입니다. 고객님의 최근의 꿈은 승진이나 연봉인상이 아닐가 싶습니다. Huawei인증 H35-580_V2.0시험은 IT인증시험중 가장 인기있는 국제승인 자격증을 취득하는데서의 필수시험과목입니다.그만큼 시험문제가 어려워 시험도전할 용기가 없다구요? 이제 이런 걱정은 버리셔도 됩니다. Fast2test의 Huawei인증 H35-580_V2.0덤프는Huawei인증 H35-580_V2.0시험에 대비한 공부자료로서 시험적중율 100%입니다.

H35-580_V2.0최신버전 공부자료: https://kr.fast2test.com/H35-580_V2.0-premium-file.html