BONUS!!! Download part of ExamsLabs 800-150 dumps for free: https://drive.google.com/open?id=16l_U-H8bDaRcmdOEWVUo7yCLkUaLFwk4
During your use of our 800-150 learning materials, we also provide you with 24 hours of free online services. Whenever you encounter any 800-150 problems in the learning process, you can email us and we will help you to solve them immediately. And you will find that our service can give you not only the most professional advice on 800-150 Exam Questions, but also the most accurate data on the updates.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Networking Fundamentals | 20% | - OSI model and network topologies - IP addressing, subnetting and routing basics - VLAN, switching and connectivity concepts |
| Topic 2: Software and Configuration Support | 15% | - Accessing devices via console or remote methods - Basic configuration and license verification - Software image management and verification |
| Topic 3: Cisco Device Installation and Setup | 20% | - Initial verification and startup procedures - Power, cabling and interface identification - Physical installation and rack mounting |
| Topic 4: Troubleshooting and Field Operations | 20% | - Diagnose hardware, connectivity and interface issues - Wireless device support and basic troubleshooting - Documentation, safety and escalation processes |
| Topic 5: Hardware Components and Replacement | 25% | - Identify field replaceable units (FRUs) for switches, routers, firewalls - Replacement for UCS, collaboration and Meraki devices - Safe replacement procedures and ESD protection |
If you buy our 800-150 practice engine, you can get rewords more than you can imagine. On the one hand, you can elevate your working skills after finishing learning our 800-150 study materials. On the other hand, you will have the chance to pass the exam and obtain the 800-150certificate, which can aid your daily work and get promotion. All in all, learning never stops! It is up to your decision now. Do not regret for you past and look to the future.
NEW QUESTION # 92
Refer to the exhibit.
Refer to the exhibit. Which component is highlighted on the Cisco I/O module image?
Answer: A
Explanation:
The highlighted component on the Cisco I/O module is the chassis connections LED, which indicates the status of connectivity between the I/O module and the chassis.
In the exhibit, the orange arrow points to a small rectangular LED indicator located to the left side of the I/O module (Cisco UCS-IOM-2304). This specific LED is not aligned with the ports, fans, or screws, which helps identify it correctly.
Chassis connections LED (B) is responsible for indicating the status of uplink/downlink communication between the I/O module and the chassis.
Green usually indicates a healthy link.
Amber or off may indicate a problem or no connection.
Why the other answers are incorrect:
A . Captive screw → These are at the far corners, not where the arrow points.
C . Fan module LED → This IOM doesn't have user-visible fan LEDs at the front face.
D . Fixed port → These are the large rectangular SFP ports clearly visible in the middle, not near the arrow.
This identification is important when troubleshooting chassis-to-IOM connectivity or verifying module status LEDs during field maintenance.
NEW QUESTION # 93
Refer to the exhibit. Drag and drop the names of the field-replaceable units from the left onto the corresponding letters on the image of the Cisco Catalyst 9400 modular switch.
Answer:
Explanation:
Explanation:
A # Power supply modules
B # Fan tray assembly
C # Line card slots 1 and 2
D # Supervisor modules
E # Line card slots 5, 6, and 7
The power supply units (A) are at the top, the fan tray (B) is a vertical module on the left, line cards (C and E) span multiple slots horizontally, and supervisor modules (D) are typically placed centrally for control functions.
In theFLDTEC courseunderCisco Modular Hardware Overview, the Cisco Catalyst 9400 series is broken down into clearly defined FRU zones:
* Power Supply Modules (A):Located at thetop of the chassis, these provide redundant, hot-swappable power to the switch.
* Fan Tray Assembly (B):Mounted vertically on the left, this ensures proper cooling and airflow throughout the chassis.
* Line Card Slots 1 and 2 (C):Located in the upper section for network expansion.
* Supervisor Modules (D):Positioned centrally, they handle control plane operations, management, and switching logic.
* Line Card Slots 5, 6, and 7 (E):Lower slots for high-density port expansion.
Correct FRU identification ensures successful maintenance, upgrades, and hardware replacement during field operations.
NEW QUESTION # 94
Drag and drop the functions from the left onto the corresponding Cisco data center technologies on the right.
Answer:
Explanation:
Explanation:
Integrates multiple network layers into a single infrastructure # Unified Fabric Provides link aggregation and redundancy between switches # Virtual port channels (vPCs) Enables software-defined networking in data centers # Application Centric Infrastructure (ACI) Combines storage and network traffic on a single network # Fibre Channel over Ethernet (FCoE) These data center solutions are covered in theFLDTEC courseunder Cisco's unified data center architecture and switching portfolio:
Unified Fabric:Streamlines Layer 2 and Layer 3 into a single operational model, reducing complexity and enhancing scalability.
vPC (Virtual Port Channel): Allows two Nexus switches to appear as one logical switch, enablingloop-free topologyandactive-active uplinks.
ACI (Application Centric Infrastructure): Cisco's SDN solution, delivering centralized automation, policy enforcement, and fabric management.
FCoE: Enableslossless Ethernetforstorage (Fibre Channel)traffic to coexist withdatatraffic on the same Ethernet infrastructure.
These technologies are fundamental in modern Cisco-powered data centers tooptimize performance,reduce hardware, andsimplify management.
NEW QUESTION # 95
What are the steps to mount a Cisco device in a rack?
Answer: B
Explanation:
The correct sequence for mounting a Cisco device in a rack is:
Install mounting brackets: Attach the appropriate rack-mount brackets to the sides of the device using the screws provided. This step prepares the device for secure installation in the rack.
Mount in rack: Carefully place the device into the rack, aligning the brackets with the rack posts, and secure it using the appropriate rack-mount screws.
Ground the device: After the device is securely mounted, connect the grounding wire to the chassis grounding point and then to the facility ground. This step ensures safety and compliance with electrical standards.
This sequence is recommended to ensure both the physical security of the device and the safety of personnel during installation.
NEW QUESTION # 96
Which command is used to download a copied configuration file from a TFTP server to merge it with the running configuration of a replacement Cisco device?
Answer: C
NEW QUESTION # 97
......
At the moment you come into contact with our 800-150 learning guide you can enjoy our excellent service. You can ask our staff about what you want to know. After full understanding, you can choose to buy our 800-150 exam questions. If you use the 800-150 study materials, you have problems that you cannot solve. Just contact with us via email or online, we will deal with you right away. And we offer 24/7 online service. So if you have any problem, you can always contact with us no matter any time it is.
Excellect 800-150 Pass Rate: https://www.examslabs.com/Cisco/Cisco-Certified-Field-Technician-CCT/best-800-150-exam-dumps.html
BTW, DOWNLOAD part of ExamsLabs 800-150 dumps from Cloud Storage: https://drive.google.com/open?id=16l_U-H8bDaRcmdOEWVUo7yCLkUaLFwk4