After taking a bird's eye view of applicants' issues, LatestCram has decided to provide them with the Real NSE6_FNC_AD-7.6 Questions. These Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) dumps pdf is according to the new and updated syllabus so they can prepare for Fortinet certification anywhere, anytime, with ease. A team of professionals has made the product of LatestCram after much hard work with their complete potential so the candidates can prepare for Fortinet practice test in a short time.
| Section | Weight | Objectives |
|---|---|---|
| Deployment and Provisioning | 30% | - Security automation configuration - Access control and logical networks - Security policies and enforcement - High Availability (HA) setup and monitoring |
| Network Visibility and Monitoring | 20% | - Troubleshooting network and device status - Logging and reporting - Guest and contractor management - Device profiling and classification |
| Integration | 25% | - Syslog and SNMP trap integration - MDM and third-party device integration - FortiNAC-F Manager configuration - Integration with FortiGate/FortiOS |
| Concepts and Initial Configuration | 25% | - Model and organize infrastructure devices - Isolation networks and configuration wizard - FortiNAC-F architecture and concepts |
>> NSE6_FNC_AD-7.6 Exam Brain Dumps <<
The Fortinet NSE 6 - FortiNAC-F 7.6 Administrator (NSE6_FNC_AD-7.6) certification is the way to go in the modern Fortinet era. Success in the Fortinet NSE6_FNC_AD-7.6 exam of this certification plays an essential role in an individual's future growth. Nowadays, almost every tech aspirant is taking the test to get Fortinet NSE6_FNC_AD-7.6 Certification and find well-paying jobs or promotions. But the main issue that most of the candidates face is not finding updated Fortinet NSE6_FNC_AD-7.6 practice questions to prepare successfully for the Fortinet NSE6_FNC_AD-7.6 certification exam in a short time.
NEW QUESTION # 79
Refer to the exhibit. An administrator has configured the DHCP scope for a registration isolation network, but the isolation process isn't working.
What is the problem with the configuration?
Answer: B
Explanation:
In a FortiNAC-F deployment, the configuration of the DHCP scope for isolation networks (Registration, Remediation, etc.) must perfectly align with the underlying network infrastructure to ensure that isolated hosts can communicate with the FortiNAC appliance. In the provided exhibits, there is a clear discrepancy between the DHCP configuration and the Network Topology.
As shown in the "Network Topology" exhibit, the Registration Network resides on a router interface (or sub-interface) with the IP address 192.168.180.1. This address represents the default gateway for any host placed into the Registration VLAN. However, the "DHCP configuration" exhibit shows the scope "REG-ScopeOne" configured with a Gateway of
10.0.1.254. This 10.0.1.254 address belongs to the management/service network (port2 of FortiNAC), not the registration subnet. If a host in the Registration VLAN receives this incorrect gateway via DHCP, it will attempt to send all off-link traffic to an unreachable IP, preventing it from loading the Captive Portal or communicating with the FortiNAC server.
According to the FortiNAC-F Configuration Wizard Reference, when defining a Layer 3 network scope, the "Gateway" field must contain the IP address of the router interface that acts as the gateway for that specific isolation VLAN. The FortiNAC appliance itself usually sits on a different subnet, and traffic is directed to it via the router's DHCP Relay (IP Helper) and DNS redirection.
"When configuring scopes for a Layer 3 network, the Gateway value must be the IP address of the router interface for that subnet. This allows the host to reach its local gateway to route traffic.
If the gateway is misconfigured, the host will be unable to reach the FortiNAC eth1/port2 interface for registration... Ensure the Gateway matches the network topology for the isolation VLAN."
NEW QUESTION # 80
Which three communication methods are used by FortiNAC to gather information from and control, infrastructure devices? (Choose three.)
Answer: B,C,E
NEW QUESTION # 81
Which two actions must the administrator perform to allow FortiNAC-F to process incoming syslog messages from an unknown vendor? (Choose two.)
Answer: B,C
Explanation:
An event parser must be created so FortiNAC-F can interpret and extract meaningful data from the unknown vendor's syslog messages. The sending device must be modeled in the Network Inventory so FortiNAC-F can associate the incoming syslog messages with a known device and properly process the generated events.
NEW QUESTION # 82
When working with a FortiNAC-F Manager and cluster management, what will occur when a cluster manager recovers from a non-responsive state?
Answer: B
Explanation:
The correct answer is C . In FortiNAC-F Manager clustering, the active cluster management role is the leader role, and other cluster members operate as worker nodes. Fortinet's FortiNAC-F 7.6 Manager Cluster Guide states that when a worker is promoted to leader during automatic transition, the original leader becomes a worker node when it comes back online. It also explains that a cluster has one leader and can have multiple workers, with leader/worker roles used for cluster management and heartbeat exchange.
So, if the cluster manager becomes non-responsive and another node takes over leadership, the recovered manager does not automatically reclaim the leader role. It rejoins as a worker node. Option A is wrong because recovery does not automatically remove it into a standalone group. Option B is wrong because automatic return to the previous manager/leader state would create instability and possible split-brain behavior. Option D is wrong because "standby" is not the role described for FortiNAC-F Manager clustering in this context; the documented cluster roles are leader and worker.
NEW QUESTION # 83
Which two things must be done to allow FortiNAC to process incoming syslog messages from an unknown vendor? (Choose two.)
Answer: B,C
NEW QUESTION # 84
......
Our NSE6_FNC_AD-7.6 learning guide allows you to study anytime, anywhere. If you are concerned that your study time cannot be guaranteed, then our NSE6_FNC_AD-7.6 learning guide is your best choice because it allows you to learn from time to time and make full use of all the time available for learning. Our online version of NSE6_FNC_AD-7.6 learning guide does not restrict the use of the device. You can use the computer or you can use the mobile phone. You can choose the device you feel convenient at any time. What is more, you can pass the NSE6_FNC_AD-7.6 exam without difficulty.
Exam NSE6_FNC_AD-7.6 Reference: https://www.latestcram.com/NSE6_FNC_AD-7.6-exam-cram-questions.html