JN0-336 Latest Exam Labs, JN0-336 Training Pdf

BTW, DOWNLOAD part of PassExamDumps JN0-336 dumps from Cloud Storage: https://drive.google.com/open?id=1tgbdMsLQjqaH4PRcS-TEqjg31Cxvctt_

One of the most important functions of our JN0-336 preparation questions are that can support almost all electronic equipment. If you want to prepare for your exam by the computer, you can buy our JN0-336 training quiz. Of course, if you prefer to study by your mobile phone, our study materials also can meet your demand. You just need to download the online version of our JN0-336 Preparation questions. We can promise that the online version will not let you down. We believe that you will benefit a lot from it if you buy our JN0-336 study materials and pass the JN0-336 exam easily.

Juniper JN0-336 Exam Syllabus Topics:

Section	Weight	Objectives
Topic 1: UTM (Unified Threat Management)	15%	- Content Filtering - Web Filtering - Antivirus - Antispam
Topic 2: Security Policy	25%	- Policy Troubleshooting - Policy Scheduling - Policy Components and Structure - Policy Logging
Topic 3: Screen Options	15%	- Screen Options Configuration - Attack Detection and Mitigation - Custom Screen Options
Topic 4: High Availability Clustering	20%	- Chassis Cluster Architecture - Failover Behavior - Control and Data Plane Synchronization - Configuration and Troubleshooting
Topic 5: IPsec VPNs	25%	- VPN Troubleshooting - IKE Phase 1 and Phase 2 - VPN High Availability - Policy-Based VPNs - Route-Based VPNs

>> JN0-336 Latest Exam Labs <<

JN0-336 Training Pdf | Valid JN0-336 Test Labs

We all know that the JN0-336 exam is not easy to pass and the certification is not easy to get. But where is a will, there is a way. if you are really determined, go buy JN0-336 study materials now. With the help of JN0-336 learning guide, your road will go more smoothly. If you want to know more about our products, maybe you can use the trial version of JN0-336 simulating exam first. Of course, you can also spend a few minutes looking at the feedbacks to see how popular our JN0-336 exam questions are.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q29-Q34):

NEW QUESTION # 29
How does the SSL proxy detect if a particular session is SSL encrypted?

A. It uses a certificate authority (CA).
B. It uses AppID services.
C. It looks at the destination port number.
D. It verifies the length of the packet.

Answer: B

Explanation:
The correct answer is A. It uses AppID services. Juniper SSL proxy does not rely only on TCP/443 or a static destination-port assumption. It uses Application Identification services to dynamically determine whether the session is SSL/TLS encrypted. Juniper states directly that SSL proxy uses application identification services to detect whether a session is SSL encrypted, and SSL proxy is allowed only when the session is identified as encrypted. If the application system cache marks the session as Encrypted=Yes, SSL proxy can transition into proxy processing; if the session is marked Encrypted=No, SSL proxy ignores it.
Option B is wrong because packet length does not reliably identify SSL/TLS encryption. Option C is a common trap: many SSL/TLS sessions use port 443, but SSL/TLS can run on nonstandard ports, and non-SSL applications can also use port 443. Junos uses AppID to avoid that weak assumption. Option D is wrong because a CA is used to sign or validate certificates during SSL forward or reverse proxy operations; it is not the mechanism used to detect whether a session is encrypted. Reference topics: SSL Proxy, AppID, encrypted session detection, application system cache, SSL/TLS inspection.

NEW QUESTION # 30
Which method does the loT Security feature use to identify traffic sourced from IoT devices?

A. The SRX Series device identifies loT devices from metadata extracted from their transit traffic.
B. The SRX Series device identifies loT devices using their MAC address.
C. The SRX Series device streams transit traffic received from the IoT device to Juniper ATP Cloud.
D. The SRX Series device streams metadata from the loT device transit traffic to Juniper ATP Cloud Juniper ATP Cloud.

Answer: A

Explanation:
The metadata is used to identify the type of device, its associated activities and its threat profile. This information is used to determine the appropriate security policy for the device. For more information on loT Security, please refer to the Juniper Security, Specialist (JNCIS-SEC) study guide.

NEW QUESTION # 31
A pair of branch SRX Series devices are booted up in cluster mode.

Referring to the exhibit, which statement is correct?

A. fxp0 or fxp1 on either device has an existing configuration.
B. node1 is running a " factory-default config " .
C. the devices are not the same hardware.
D. the devices are not running the same version of Junos.

Answer: A

Explanation:
The correct answer is C. fxp0 or fxp1 on either device has an existing configuration. The exhibit shows each node reporting itself in hold state and the peer as lost under redundancy group 0. Juniper's chassis cluster troubleshooting documentation shows this same hold/lost symptom and states that when a node is in hold, it is not ready to operate in a chassis cluster. For branch SRX devices, when cluster mode is enabled, specific physical interfaces are automatically converted into fxp0 for out-of-band management and fxp1 for the HA control link. These interfaces cannot retain normal transit or standalone interface configuration. If the ports that become fxp0 or fxp1 already have configuration, the cluster can enter the hold/lost condition shown in the exhibit.
Option A is wrong because the output does not indicate a Junos version mismatch. Option B is wrong because hardware mismatch is not the symptom being shown. Option D is too specific: a factory-default configuration can cause this problem because it may include configuration on interfaces that become fxp0/fxp1, but the exhibit does not prove specifically that node1 alone is running factory-default configuration. The tested issue is the existing configuration on the interfaces reserved for chassis-cluster management/control. Reference topics: HA Clustering, chassis cluster hold/lost state, fxp0, fxp1, branch SRX cluster initialization.

NEW QUESTION # 32
You set up the Juniper ATP Appliance solution on your network and notice that the macOS files are not being analyzed......... malware.
In this scenario, what must you do?

A. Create a macOS virtual machine on the JATP Appliance and install the secondary core software.
B. Under Config > System Profiles≥Secondary Cores workspace, enable macOs Detection.
C. Under Config -> System Profiles→≥Secondary Cores workspace, create a macOS profile
D. You must obtain a Apple Mac Mini device and install the secondary core software.

Answer: C

NEW QUESTION # 33
Click the Exhibit button.

Which two statements about the log output shown in the exhibit are correct? (Choose two)

A. AppTrack is enabled on the trast zone.
B. Traffic destined to the HTTP server is placed in an IPsec tunnel
C. AppTrack is enabled on the untrust zone.
D. Source NAT is performed

Answer: A,C

NEW QUESTION # 34
......

Remember that this is a crucial part of your career, and you must keep pace with the changing time to achieve something substantial in terms of a certification or a degree. So do avail yourself of this chance to get help from our exceptional Security, Specialist (JNCIS-SEC) (JN0-336) dumps to grab the most competitive Security, Specialist (JNCIS-SEC) (JN0-336) certificate.

JN0-336 Training Pdf: https://www.passexamdumps.com/JN0-336-valid-exam-dumps.html

DOWNLOAD the newest PassExamDumps JN0-336 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1tgbdMsLQjqaH4PRcS-TEqjg31Cxvctt_