To be well-prepared, you require trust worthy and reliable SurePassExams practice material. You also require accurate SurePassExams study material to polish your capabilities and improve your chances of passing the FlashArray-Storage-Professional certification exam. SurePassExams facilitates your study with updated Pure Storage FlashArray-Storage-Professional Exam Dumps. This FlashArray-Storage-Professional exam prep material has been prepared under the expert surveillance of 90,000 highly experienced SurePassExams professionals worldwide.
| Section | Weight | Objectives |
|---|---|---|
| Data Protection | 18% | - Protection and Recovery
|
| Troubleshooting | 20% | - System Diagnostics
|
| Monitoring | 20% | - Pure1 and GUI Monitoring
|
| Administration | 30% | - Core FlashArray Administration
|
| FlashArray Files | 12% | - File Services
|
>> Sample FlashArray-Storage-Professional Exam <<
This is how not only you can make your success certain in the Pure Certified FlashArray Storage Professional exam in a single attempt but you can also score high marks by properly following Pure Storage FlashArray-Storage-Professional Dumps provided. Now you don't need to collect outdated and irrelevant Pure Storage FlashArray-Storage-Professional dumps from several sources and spend money on expensive books. Because the SurePassExams follows every bit of the official Pure Certified FlashArray Storage Professional exam syllabus to compile the most relevant Pure Storage FlashArray-Storage-Professional Pdf Dumps questions and answers with 100% chance of appearing in the actual exam. The Pure Storage FlashArray-Storage-Professional PDF dumps file does not require any installation and is equally suitable for PCs, mobile devices, and tablets.
NEW QUESTION # 42
Where can a snapshot be copied out to?
Answer: A
Explanation:
On a Pure Storage FlashArray, volume snapshots are immutable, read-only, point-in-time representations of your data. Because they cannot be attached directly to a host to be read or modified, you must use the Copy function to make the data usable.
The Purity operating environment allows you to copy a snapshot to two specific destinations:
A new volume: This effectively creates a clone. It provisions a brand-new, writable volume using the exact data footprint of the snapshot. This is incredibly useful for test/dev environments, offline reporting, or granular file recovery where you don't want to disrupt the original production volume.
An existing volume: This takes the data from the snapshot and completely overwrites the target volume. This is the standard procedure when you need to perform a full rollback of a corrupted volume, or when you want to quickly refresh a lower-level environment (like refreshing a QA database with yesterday's Production snapshot).
Here is why the other options are incorrect:
A new Snapshot (B & C): You cannot directly "copy" a snapshot to create another standalone snapshot. Snapshots are uniquely generated from active volumes. If you wanted to duplicate a snapshot's exact state, you would first copy it to a volume, and then take a new snapshot of that resulting volume.
NEW QUESTION # 43
A storage administrator is troubleshooting multipathing issues.
What is the CLI command that allows the administrator to sample the I/O balance information at a consistent interval?
Answer: A
Explanation:
Command Purpose: The purehost monitor command is the primary tool in the Pure Storage CLI for observing real-time performance and connectivity health from the perspective of the hosts connected to the FlashArray.
The --balance Flag: When the --balance flag is added, the output shifts from general performance (IOPS, bandwidth, latency) to showing how I/O is distributed across the available paths (controllers and ports). This is critical for identifying "unbalanced" loads, which usually point to misconfigured MPIO (Multi-Path I/O) on the host side (e.g., a host only using one controller's ports).
Interval vs. Repeat:
The --interval flag specifies the time in seconds between each sample. In option C, --interval 15 tells the array to refresh the data every 15 seconds.
The --repeat flag (seen in option A) is used to limit the total number of samples taken before the command exits. However, in standard troubleshooting, the administrator typically wants a consistent stream of data until manually stopped (Ctrl+C).
--resample (seen in option B) is not a valid flag for the purehost monitor command in Purity.
Best Practice: When troubleshooting multipathing, Pure Storage recommends monitoring the balance to ensure that the "Relative I/O" percentage is roughly equal across all active paths. Large discrepancies often indicate that the host's MPIO policy is set to "Failover Only" instead of the recommended "Round Robin" or "Least Queue Depth."
NEW QUESTION # 44
What should an administrator configure when setting up device-level access control in an NVMe/TCP network?
Answer: A
Explanation:
In any NVMe-based storage fabric (including NVMe/TCP, NVMe/FC, and NVMe/RoCE), the standard method for identifying endpoints and enforcing device-level access control is the NQN (NVMe Qualified Name).
The NQN serves the exact same purpose in the NVMe protocol as an IQN (iSCSI Qualified Name) does in an iSCSI environment, or a WWPN (World Wide Port Name) does in a Fibre Channel environment. It is a unique identifier assigned to both the host (initiator) and the storage array (target subsystem). When setting up access control on a Pure Storage FlashArray, the storage administrator must capture the Host NQN from the operating system and configure a Host object on the array with that specific NQN. This ensures that only the authorized host can discover, connect to, and access its provisioned NVMe namespaces (volumes).
Here is why the other options are incorrect:
VLANs (A): Virtual LANs are used for network-level isolation and segmentation at Layer 2 of the OSI model. While you might use a VLAN to separate your storage traffic from your management traffic, it is a network security measure, not a device-level access control mechanism for the storage protocol itself.
LACP (C): Link Aggregation Control Protocol (LACP) is a network protocol used to bundle multiple physical network links into a single logical link for redundancy and increased bandwidth. It has nothing to do with storage access control or mapping volumes to hosts.
NEW QUESTION # 45
An ActiveCluster (AC) FlashArray pair lost connectivity with each other over the replication network. When the pod failover occurred, a single volume in the stretched pod lost connectivity to its host while other volumes in the stretched pod remained available to the host.
What is the most likely cause of the loss of stretched volume connectivity from the host?
Answer: A
Explanation:
ActiveCluster Connectivity Models: In an ActiveCluster environment, hosts can connect to the arrays using either a Uniform or Non-Uniform access model. In a Uniform model, the host has active paths to both FlashArrays in the cluster.
The Failover Scenario: When the replication network between the two arrays fails (a "split-brain" scenario), the Mediator decides which array keeps the pod online (the winner) and which array takes it offline (the loser) to ensure data consistency.
Analyzing the Symptoms:
The pod failed over, meaning one array is now the exclusive servicer for that pod.
Most volumes in that pod stayed online for the host. This proves that the host is correctly registered in Purity (ruling out Option C) and that the general ActiveCluster/Pod logic is functioning.
Only one specific volume lost connectivity.
The Root Cause (Zoning/Access): If a single volume loses connectivity while others do not, it indicates a pathing issue specific to that volume's visibility. In an ActiveCluster failover, if the "winning" array does not have a physical path to the host for that specific volume (due to missing FC Zoning or Ethernet VLAN tagging on the switches), the host will lose access once the "losing" array drops its paths.
Why Option A is unlikely: If "Uniform access" (the ability to see both arrays) was the issue, it would typically affect all volumes in the pod equally during a failover, not just a single outlier. The fact that the rest of the volumes remained available suggests the host is configured for uniform access, but the specific network plumbing (zoning) for that one volume's path to the surviving array is missing.
!
NEW QUESTION # 46
An administrator is setting up FA File using the FlashArray GUI. The company is an NFS only shop and needs to configure their remote user authentication.
Which of the following GUI locations should the administrator use to configure access?
Answer: C
Explanation:
For FlashArray File Services (FA File), user authentication and mapping depend on the storage protocol being used. In an NFS-only environment, remote user authentication (resolving UNIX UIDs and GIDs to actual usernames and managing access) is typically handled via LDAP or NIS.
To configure this integration in the Purity GUI, the storage administrator must navigate to Settings > Access > Directory Services. This specific section allows the FlashArray to connect to a centralized directory server (such as OpenLDAP or even Active Directory providing LDAP services) to pull the necessary UNIX user and group attributes required for NFS file permissions to function properly.
Here is why the other options are incorrect:
Settings > Access > Create Active Directory Account (A): This specific menu path is used strictly for configuring native Active Directory (AD) computer accounts and joining the domain to support the SMB (Server Message Block) protocol. Since the scenario explicitly states the company is an "NFS only shop," configuring an SMB AD account is not the correct step.
Settings > Access > File System (C): While you manage file-level exports and policies within the Purity file interface, the global configuration for remote user authentication and directory server integration lives under the dedicated Directory Services pane.
NEW QUESTION # 47
......
To save the clients’ time, we send the products in the form of mails to the clients in 5-10 minutes after they purchase our FlashArray-Storage-Professional study materials and we simplify the information to let the clients only need dozens of hours to learn and prepare for the test. To help the clients solve the problems which occur in the process of using our FlashArray-Storage-Professional Study Materials, the clients can consult u about the issues about our study materials at any time.
FlashArray-Storage-Professional Exam: https://www.surepassexams.com/FlashArray-Storage-Professional-exam-bootcamp.html