P.S. Free & New 350-501 dumps are available on Google Drive shared by Exams4sures: https://drive.google.com/open?id=1EFgS-W4I7YDh3Eg4N7y_bg1MMVPNxZCa
The most important part of Cisco 350-501 exam preparation is practice, and the right practice is often the difference between success and failure. Exams4sures also makes your preparation easier with practice test software to help you get hands-on exam experience before the actual Implementing and Operating Cisco Service Provider Network Core Technologies (350-501) exam. After consistent practice, the final exam will not be too difficult for a student who has already practiced from real Cisco 350-501 exam questions.
| Section | Weight | Objectives |
|---|---|---|
| Core Architecture | 15% | - Describe management plane security - Describe QoS architecture - Describe service provider virtualization - Describe service provider architectures - Configure and verify control plane security - Implement data plane security - Describe Cisco network software architecture |
| Automation and Assurance | 20% | - Describe Cisco NSO - Describe the programmable, software-defined network - Describe telemetry - Describe automation and assurance tools - Implement network assurance with Cisco DNA Center - Configure and verify NETCONF/RESTCONF - Configure and verify YANG models |
| MPLS and Segment Routing | 20% | - Implement MPLS Layer 3 VPNs - Describe MPLS OAM - Implement MPLS Layer 2 VPNs - Implement segment routing traffic engineering (SR-TE) - Implement segment routing - Describe EVPN |
| Networking | 25% | - Implement BGP - Implement MPLS - Implement routing policy language and route maps - Implement IS-IS - Implement OSPF - Troubleshoot routing protocols - Describe BGP path selection algorithm - Implement segment routing - Describe IPv6 transition |
| Services | 20% | - Describe VPN technologies - Describe broadband subscriber services - Configure L2VPN and Carrier Ethernet - Configure L3VPN - Implement multicast services - Implement QoS services |
>> Exam Cisco 350-501 Topic <<
There are a lot of experts and professors in or company in the field. In order to meet the demands of all people, these excellent experts and professors from our company have been working day and night. They tried their best to design the best 350-501 certification training dumps from our company for all people. By our study materials, all people can prepare for their 350-501 exam in the more efficient method. We can guarantee that our study materials will be suitable for all people and meet the demands of all people, including students, workers and housewives and so on. If you decide to buy and use the 350-501 Training Materials from our company with dedication on and enthusiasm step and step, it will be very easy for you to pass the exam without doubt. We sincerely hope that you can achieve your dream in the near future by the 350-501 latest questions of our company.
NEW QUESTION # 471
Refer to the exhibit.
Refer to the exhibit. A network support engineer for ASN 65502 receives a technical support ticket from a customer in ASN 65503 who reports that an eBGP session is down. The engineer determines that the peering failed after a recent change to the device at 192.168.26.2. EDGE-GW-1 must establish an eBGP session with the peering router 192.168.26.2. Which configuration establishes this session?
Answer: C
NEW QUESTION # 472
Refer to the exhibit. What does this value mean when it is received in XML?
Answer: D
Explanation:
When no data exist, you can represent a level of XML hierarchy in one of two ways:
using opening and closing tags: <tag></tag>
using shorthand notation: <tag/>
NEW QUESTION # 473
A customer site is being connected to a Frame Relay network via a T1 link. The customer has a contract for 512 kbps service with a Tc value of 125 ms. Under peak line conditions customer traffic can reach four times the contracted speed. Which QoS configuration must the service provider implement to limit the customer to the contracted values?
Answer: C
NEW QUESTION # 474
SIMULATION 11
Guidelines
This is a lab item in which tasks will be performed on virtual devices.
- Refer to the Tasks tab to view the tasks for this lab item.
- Refer to the Topology tab to access the device console(s) and perform the tasks.
- Console access is available for all required devices by clicking the device icon or using the tab(s) above the console window.
- All necessary preconfigurations have been applied.
- Do not change the enable password or hostname for any device.
- Save your configurations to NVRAM before moving to the next item.
- Click Next at the bottom of the screen to submit this lab and move to the next question.
- When Next is clicked, the lab closes and cannot be reopened.
Topology
Tasks
BGP peering has been pre-configured. Perform following control-plane security featuresy given the topology below.
Task1:
Configure MD5 authentication between the BGP peers across both R1 and R2's Loopback 0 interface using the password: Ci$c012345!!
Task2:
Configure five as maximum number of BGP prefixes allowed to be learned between R1 and R2.
Initial configuration with IP addressing has been completed. The candidate must not make any changes to the configurations except to fulfill the tasks listed above.
Answer:
Explanation:
BGP MD5 authentication is enabled per-neighbor by configuring a shared password on both peers; it must match on each side or the TCP session will not establish. The maximum-prefix feature protects the control plane by limiting how many routes a neighbor can advertise/receive before triggering the configured action. Apply both settings on each router for the Loopback0- based eBGP neighbor.
R1 (AS 100), neighbor = R2 Loopback0 (10.2.2.2):
router bgp 100
neighbor 10.2.2.2 password Ci$c012345!!
neighbor 10.2.2.2 maximum-prefix 5
R2 (AS 200), neighbor = R1 Loopback0 (10.1.1.1):
router bgp 200
neighbor 10.1.1.1 password Ci$c012345!!
neighbor 10.1.1.1 maximum-prefix 5
NEW QUESTION # 475
Refer to the exhibit. A regional company is implementing a network-health monitoring solution on their Cisco ISR routers to monitor network performance metrics and gather real time data. The router R1 Ethernet interface, GigabitEthemet0/0, is assigned IP address 192.168.1.1/24, and basic IP addressing and connectivity to the data-collection server have already been configured.
A network engineer must update R1 to ensure secure and reliable data transmission to the monitoring server, which is located at IP address 192.168.50.50 on port 50051. To achieve secure communication, the configuration must comply with RPC 5246, and to ensure reliable data transmission, it must follow RFC 793. Which command must the engineer execute to configure data collection?
Answer: C
Explanation:
The configuration specifies that the router must transmit telemetry data securely and reliably to the monitoring server. To achieve this:
gRPC-TCP (gRPC with Transport Layer Security) is compliant with RFC 5246 for secure communication using TLS.
Reliable transmission is ensured through TCP, as it adheres to RFC 793 for reliability.
The command telemetry ietf subscription 1 receiver ip address 192.168.50.50 50051 protocol grpc-tcp explicitly configures R1 to send telemetry data to the specified server and port using the required secure and reliable protocol.
NEW QUESTION # 476
......
Our 350-501 learning question can provide you with a comprehensive service beyond your imagination. 350-501 exam guide has a first-class service team to provide you with 24-hour efficient online services. Our team includes industry experts & professional personnel and after-sales service personnel, etc. Industry experts hired by 350-501 exam guide helps you to formulate a perfect learning system, and to predict the direction of the exam, and make your learning easy and efficient. Our staff can help you solve the problems that 350-501 Test Prep has in the process of installation and download. They can provide remote online help whenever you need. And after-sales service staff will help you to solve all the questions arising after you purchase 350-501 learning question, any time you have any questions you can send an e-mail to consult them. All the help provided by 350-501 test prep is free. It is our happiest thing to solve the problem for you. Please feel free to contact us if you have any problems.
Valid 350-501 Exam Simulator: https://www.exams4sures.com/Cisco/350-501-practice-exam-dumps.html
P.S. Free 2026 Cisco 350-501 dumps are available on Google Drive shared by Exams4sures: https://drive.google.com/open?id=1EFgS-W4I7YDh3Eg4N7y_bg1MMVPNxZCa