P.S. Free & New 350-101 dumps are available on Google Drive shared by Free4Dump: https://drive.google.com/open?id=14pxfU4GZFKJr7e4yo955aEjjUekGKfNa
A lot of applicants have studied from Cisco 350-101 practice material. They have rated it positively because they have cracked Cisco 350-101 Certification on their first try. Free4Dump guarantees its customers that they can pass the 350-101 test on the first attempt.
| Section | Weight | Objectives |
|---|---|---|
| 802.11 Technology Fundamentals | 20% | - Wireless standards and operations
|
| Wireless Monitoring and Management | 25% | - Monitoring and troubleshooting
|
| Automation and AI | 10% | - Automation technologies
|
| RF Fundamentals | 15% | - RF characteristics
|
| Wireless Client Connectivity | 30% | - Client access and security
|
>> Latest 350-101 Test Simulator <<
Our Cisco 350-101 web-based practice exam software also simulates the Implementing and Operating Cisco Wireless Core Technologies (350-101) environment. These Cisco 350-101 mock exams are also customizable to change the settings so that you can practice according to your preparation needs. Free4Dump web-based 350-101 Practice Exam software is usable only with a good internet connection.
NEW QUESTION # 82
A business requires a Cisco 9163E AP to act as a point-to-point connection between two buildings on campus.
No wired connection is available between the sites, and the AP must relay network traffic across the wireless link. The administrator must ensure that the AP is configured to forward Ethernet frames between its radio and Ethernet interfaces. Which CLI command must the administrator use to configure the AP for this application?
Answer: A
Explanation:
In point-to-point wireless deployments, the AP must act as a transparent bridge, forwarding Ethernet frames between the wired network interface and the wireless radio. The correct configuration command in Cisco IOS XE for a Cisco 9163E AP isap name < ap_name > mode bridge. This sets the AP into bridge mode, allowing it to function as a Layer 2 relay between the two connected sites, effectively extending the Ethernet network over the wireless link. Option A, FlexConnect mode, is intended for APs to locally switch client traffic while maintaining CAPWAP control connectivity, not for bridging traffic between networks. Option B,capwap mode p2p, is not valid syntax in IOS XE; CAPWAP does not provide a dedicated P2P mode for Ethernet bridging. Option D,capwap mode mesh, configures the AP for mesh networking, which is for multi-hop client coverage rather than a direct point-to-point bridge. Cisco Wireless Core Technologies recommend bridge mode for point-to-point wireless links to maintain transparent forwarding, support VLAN tagging, and ensure seamless Layer 2 connectivity between remote buildings, which is essential for applications like IP telephony, security cameras, and campus LAN extension. Reference topics:Wireless Network Implementation - Bridge mode, point-to-point AP, Layer 2 traffic forwarding, Cisco 9163E configuration.
NEW QUESTION # 83
Exhibit:
Refer to the exhibit. A Cisco 9800 WLC is deployed at a branch location to facilitate secure client connectivity. A network engineer configures a WLAN using WPA2 Enterprise authentication and activates the RADIUS server-based method to align with company security policies. Which CLI command must be added to the box in the configuration to enable client authentication for this WLAN?
Answer: D
Explanation:
The correct command issecurity dot1x authentication-list RADIUS_AUTH_LIST. On a Catalyst 9800 WLC, the WLAN configuration must bind the WLAN's 802.1X authentication process to an AAA authentication method list. Cisco's Catalyst 9800 802.1X configuration workflow shows the WLAN entered with wlan < profile-name > < wlan-id > < ssid-name > , followed by the command security dot1x authentication-list < dot1x-list-name > . Cisco configuration guide examples also show the same syntax under WLAN configuration mode as Device(config-wlan)# security dot1x authentication-list auth-list-name.
In the exhibit, security wpa akm dot1x enables 802.1X as the key-management method, while security wpa wpa2 and security wpa wpa2 ciphers aes establish WPA2/AES security. These statements define the WLAN security framework, but they do not identify which AAA method list will be used to reach the RADIUS backend. The missing command must therefore attach the named authentication list RADIUS_AUTH_LIST to dot1x authentication. Options A, B, and C are parser-invalid or incorrectly ordered IOS XE syntax.
Reference topic:Client Connectivity Configuration - WPA2-Enterprise WLAN configuration, 802.1X authentication, AAA method lists, RADIUS-backed client access, and Catalyst 9800 WLAN security commands.
NEW QUESTION # 84
What is an attribute of the workgroup bridge mode for an AP in a wireless network?
Answer: A
Explanation:
The workgroup bridge mode on a Cisco access point is designed to integrate a wired network segment into an existing wireless infrastructure. In this mode, the AP acts as a client to a root AP or wireless controller-managed network, bridging Ethernet-connected devices on its wired ports to the wireless LAN. This is commonly deployed in environments where wired devices, such as printers, legacy systems, or isolated office equipment, require network connectivity but cannot directly connect to the wired backbone.
Traffic from devices on the wired segment is encapsulated and transmitted over the wireless link to the root AP, effectively extending network access without running physical cabling. Unlike bridging between multiple AP radios (2.4 GHz vs. 5 GHz), or providing inter-Ethernet port forwarding, the primary attribute of a workgroup bridge is wireless-to-wired integration, not radio- to-radio communication or internal LAN segmentation. Broadcast domains are limited to the bridged wired segment and the wireless uplink; they are not automatically extended across all interfaces without VLAN configuration.
Cisco deployment guides emphasize that workgroup bridge mode is ideal for connecting remote wired clusters to a centralized WLAN, providing seamless connectivity while maintaining security and management under the controller or root AP.
NEW QUESTION # 85
What is a characteristic of 20 MHz channel width in a wireless network?
Answer: A
Explanation:
In wireless networks, the 20 MHz channel width is the standard and narrowest channel allocation in the 2.4 GHz frequency band. Using narrower channels reduces adjacent-channel interference and allows for better coexistence in high-density environments, which is particularly important in the crowded 2.4 GHz spectrum.
A 20 MHz channel uses less RF bandwidth than 40 MHz or 80 MHz channels, providing more non- overlapping channels (channels 1, 6, and 11 in 2.4 GHz) to reduce co-channel interference. Option B is incorrect, as channel width does not inherently increase authentication handoff frequency; handoff behavior is determined by RSSI, client roaming thresholds, and 802.11r fast roaming settings. Option C describes client reassociation support, which is handled by the wireless controller and client firmware, not the channel width itself. Option D is incorrect because wider channels (40 MHz, 80 MHz) provide higher throughput than 20 MHz, at the expense of increased interference potential. Cisco Wireless Core Technologies emphasize that 20 MHz channels are preferred for dense deployments in the 2.4 GHz band to maximize non-overlapping channels and reduce interference, ensuring predictable coverage and reliable client connectivity. Reference topics:RF Fundamentals - 20 MHz channels, 2.4 GHz spectrum planning, interference management, channel allocation.
NEW QUESTION # 86
high-availability configurations and relies heavily on consistent visibility into device health. Event logging and alerting must be ensured throughout maintenance windows, and the maintenance process must be centrally managed. Which process meets the requirements?
Answer: B
Explanation:
For enterprise-grade wireless networks using Cisco Catalyst Center, managing planned maintenance requires a process that ensures minimal disruption, central visibility, and event tracking. Cisco Catalyst Center provides a scheduled maintenance feature specifically designed to manage maintenance windows across WLANs and devices. This process allows administrators to define start and end times, temporarily suppress non-critical alerts, and automatically resume monitoring and event logging after completion.
NEW QUESTION # 87
......
The Free4Dump is one of the best platforms that has been helping the 350-101 exam candidates for many years. Over this long time period the countless Implementing and Operating Cisco Wireless Core Technologies 350-101 exam candidates have passed their dream Cisco 350-101 Certification Exam and they have become certified Cisco 350-101 professionals. All the successful Cisco 350-101 certification professionals are doing jobs in small, medium, and large size enterprises.
Minimum 350-101 Pass Score: https://www.free4dump.com/350-101-braindumps-torrent.html
BTW, DOWNLOAD part of Free4Dump 350-101 dumps from Cloud Storage: https://drive.google.com/open?id=14pxfU4GZFKJr7e4yo955aEjjUekGKfNa