BTW, DOWNLOAD part of DumpsQuestion H35-580_V2.0 dumps from Cloud Storage: https://drive.google.com/open?id=1Zv-UT6Gs2iC_wkCCoHZWYoZH9WzH0e4R
We offer you free update for 365 days after you purchase H35-580_V2.0 study materials from us, so that you donโt need to spend extra money for the update version. And the update version for H35-580_V2.0 study materials will be sent to your email address automatically. You just need to check your mail when you need the update version. Besides H35-580_V2.0 Study Materials are edited by professional experts, they are quite familiar with the dynamics of the exam center. Therefore if you choose H35-580_V2.0 study materials of us, we will help you pass the exam and get the certificate successfully.
The HCIA-5G-RNP certification exam evaluates an individual's knowledge on 5G network planning fundamentals, network design, deployment, and maintenance. H35-580_V2.0 Exam covers topics such as wireless access evaluation, traffic forecast, coverage planning, capacity planning, parameter design, and optimization. Individuals who earn this certification can efficiently plan and design 5G network solutions.
>> Braindumps H35-580_V2.0 Pdf <<
At the DumpsQuestion, you can download top-notch and easy-to-use H35-580_V2.0 practice test material quickly. Just take the smart and the best decision of your career and get registered for HCIA-5G-RNP&RNO V2.0 H35-580_V2.0 Exam and download DumpsQuestion H35-580_V2.0 PDF Questions and practice tests and start this journey right now. And DumpsQuestion provides 365 days updates.
Huawei H35-580_V2.0 exam is an ideal certification for professionals who want to stay up-to-date with the latest technologies and trends in the field of wireless networking. HCIA-5G-RNP&RNO V2.0 certification covers all aspects of 5G radio network planning and optimization and is recognized globally. Candidates who Pass H35-580_V2.0 Exam will receive the HCIA-5G-RNP&RNO V2.0 certification, which is highly respected in the industry.
NEW QUESTION # 10
In order to achieve ideal coverage, what is the clearance requirement around an antenna?
Answer: D
Explanation:
Explanation
In order to achieve ideal coverage, there should be a clearance zone around an antenna of at least d, where d is the Fraunhofer or Rayleigh distance at which the near/far-field transition zone exists 17. This distance depends on the largest dimension of the antenna, D, and the operating wavelength, \uF06C. Ideally, D should be at least a half of a wavelength, which gives a minimum clearance zone of a half-wavelength. For example, at 2.4 GHz, the wavelength is about 0.125 m, so the minimum clearance zone is about 0.0625 m. However, in practical situations, this clearance zone is often compromised and the effects must be determined through simulation or empirical measurement 18. A general guideline is to have a clearance zone of 5-10 m around an antenna to avoid significant degradation of performance 19. Therefore, the best answer is C.
NEW QUESTION # 11
In NSA networking, which of the following methods can be used to support X2 interconnection between an eNodeB and a gNodeB?(Select All that Apply)
Answer: A,D
Explanation:
Explanation
According to the 5G EN-DC Architecture and Interfaces, there are two methods that can be used to support X2 interconnection between an eNodeB and a gNodeB in NSA networking:
Interconnection through CI interfaces on the UMPT boards in different subracks: The UMPT is a universal main processing and transmission unit that provides main processing and transmission functions for a subrack. The UMPT has two CI interfaces that can be used for X2 interconnection with other base stations. The CI interfaces support CPRI, OBSAI, and eCPRI protocols and can use optical fibers or electrical cables for transmission. The CI interfaces can be configured as master or slave interfaces depending on the network topology.
IPRAN interconnection between subracks: IPRAN is an IP-based radio access network that uses IP transport technologies to carry base station traffic over Ethernet or MPLS networks. IPRAN can support X2 interconnection betweendifferent base stations by using IP routers or switches. IPRAN can provide flexible networking, high bandwidth, low latency, and high reliability for X2 interconnection.
The other two methods are not valid for X2 interconnection between an eNodeB and a gNodeB:
Interconnection via backplane in a subrack: This method is only applicable for X2 interconnection between two eNodeBs or two gNodeBs that are installed in the same subrack. The backplane is the internal bus that connects different boards within a subrack. The backplane supports CPRI, OBSAI, and eCPRI protocols and can provide high-speed data transmission between boards.
Interconnection through HEI interfaces on the UBBP boards in different subracks: This method is not supported by Huawei base stations. The HEI interface is a high-speed Ethernet interface that is used for data transmission between base stations and core networks or transport networks. The HEI interface supports S1, Xn, F1, E1, and N2 protocols and can use optical fibers or electrical cables for transmission. The HEI interface cannot be used for X2 interconnection between base stations.
Therefore, the correct answer is A and D.
NEW QUESTION # 12
Which of the following items can be used for measurement evaluation in idle mode during coverage problem analysis?
Answer: A
Explanation:
According to the HCIA-5G V2.0 Exam Outline , SS-RSRP is the reference signal received power of the synchronization signal block (SSB) in NR systems. It can be used for measurement evaluation in idle mode during coverage problem analysis, which corresponds to option D. OPMI is an indicator of uplink interference power measurement, CSI-RSRP is the reference signal received power of the channel state information reference signal (CSI-RS), and SRS is the sounding reference signal. These indicators are used for measurement evaluation in connected mode, not idle mode, which correspond to options A, B, and C.
NEW QUESTION # 13
Which of the following statements about the space principles for 5G BBU installation are correct?(Select All that Apply)
Answer: A,B,C
Explanation:
Explanation
According to the Hardware Description: Bbu5900 V100r013c10, these statements are correct about the space principles for 5G BBU installation:
If the installation space is insufficient, the BBU can be installed on a wall. Ensure that the wall meets the load bearing requirements: The BBU can be installed on a wall using wall-mounted brackets. The wall must be able to bear at least four times the weight of the BBU and must be flat and vertical. The installation height of the BBU must not exceed 2 m.
If the space is greater than 600 mm, a cabinet can be added to install the BBU: The BBU can be installed in a cabinet that meets the requirements of Huawei base stations. The cabinet must have a width of 19 inches and a depth of at least 600 mm. The cabinet must also provide sufficient ventilation, grounding, and lightning protection for the BBU.
If the remaining space of an existing cabinet is greater than 4 U, the BBU can be installed directly: The BBU can be installed in an existing cabinet that has enough space for it. The BBU has a height of 2 U, so it requires at least 4 U of space in a cabinet. The existing cabinet must also meet the requirements of Huawei base stations.
The other statement is incorrect about the space principles for 5G BBU installation:
If the installation space is insufficient, install 5G boards directly into the existing 4G B8U: This statement is not supported by Huawei base stations. The 5G boards cannot be installed directly into the existing 4G B8U because they have different slot distributions and board types. The 5G boards can only be installed in a BBU5900 subrack that supports both LTE and NR modes.
NEW QUESTION # 14
Which of the following statements about downlink beamforming are correct?(Select All that Apply)
Answer: A,B,C
Explanation:
Explanation
According to the Beamforming techniques for massive MIMO systems in 5G, these statements are correct about downlink beamforming. Beamforming is a technique that uses multiple antennas to steer the transmitted signal toward the intended user or direction. Static beams are used for broadcast channels, such as MIB and SIB, which are transmitted to all UEs in a cell. Dynamic beams are used for traffic channels, such as PDSCH and PDCCH, which are transmitted to specific UEs based on their channel conditions and locations. Both broadcast channels and traffic channels support beamforming, but with different beamforming methods and performance requirements.
NEW QUESTION # 15
......
H35-580_V2.0 Pass Leader Dumps: https://www.dumpsquestion.com/H35-580_V2.0-exam-dumps-collection.html
BTW, DOWNLOAD part of DumpsQuestion H35-580_V2.0 dumps from Cloud Storage: https://drive.google.com/open?id=1Zv-UT6Gs2iC_wkCCoHZWYoZH9WzH0e4R