Juniper JN0-351 Reliable Test Review & JN0-351 Passing Score

P.S. Free 2026 Juniper JN0-351 dumps are available on Google Drive shared by GetValidTest: https://drive.google.com/open?id=1carpCgHwwnc3A-s4l7sxn8fEjqah8doy

Your aspiring wishes such as promotion chance, or higher salaries or acceptance from classmates or managers and so on. And if you want to get all benefits like that, our JN0-351 training quiz is your rudimentary steps to begin. So it is undisputed that you can be prepared to get striking outcomes if you choose our JN0-351 Study Materials. And so many of our loyal customers have achieved their dreams with the help of our JN0-351 exam questions.

Juniper JN0-351 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
Topic 2
  • Spanning Tree: Networking professionals explore the principles and advantages of the Spanning Tree Protocol (STP) to ensure loop-free topologies in Layer 2 networks.
Topic 3
  • BGP: This topic focuses on the operational and conceptual elements of BGP, a cornerstone in enterprise networks.
Topic 4
  • Protocol Independent Routing: An essential domain for understanding routing components outside protocol dependencies, this topic enhances expertise in configuring, monitoring, and troubleshooting critical elements.

>> Juniper JN0-351 Reliable Test Review <<

JN0-351 Passing Score - JN0-351 Latest Test Dumps

By gathering, analyzing, filing essential contents into our JN0-351 training quiz, they have helped more than 98 percent of exam candidates pass the JN0-351 exam effortlessly and efficiently. You can find all messages you want to learn related with the exam in our JN0-351 Practice Engine. Any changes taking place in the environment and forecasting in the next JN0-351 exam will be compiled earlier by them. About necessary or difficult questions, they left relevant information for you.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q125-Q130):

NEW QUESTION # 125
Which two statements are correct about Junos OS static route configuration with a "qualified- next-hop"? (Choose two.)

Answer: C,D

Explanation:
The "qualified-next-hop" option in a Junos OS static route configuration allows an administrator to specify a different preference (administrative distance) for individual next hops of the same destination prefix. This is commonly used to implement floating static routes, where a backup next hop with a higher preference value is only used if the primary next hop becomes unavailable.


NEW QUESTION # 126
Your BGP neighbors, one in the USA and one in France, are not establishing a connection with each other.
Referring to the exhibit, which statement is correct?

Answer: A

Explanation:
In the configuration shown, BFD (Bidirectional Forwarding Detection) liveness detection is globally configured, but for BFD to work with specific BGP neighbors, it must be configured under each BGP neighbor or BGP group. Without specific BFD configuration at the neighbor or group level, BFD will not be used to monitor the BGP sessions, which might be causing the BGP neighbors not to establish a connection.


NEW QUESTION # 127
Your network has two ISPs available. You want to ensure that all outbound traffic is routed out ISP-1. If the connection to ISP-1 fails, all outbound traffic is routed to the backup ISP, ISP-2. In this scenario, how should you configure BGP on your network?

Answer: A


NEW QUESTION # 128
Exhibit

You have configured a GRE tunnel. To reduce the risk of dropping traffic, you have configured a keepalive OAM probe to monitor the state of the tunnel; however, traffic drops are still occurring.
Referring to the exhibit, what is the problem?

Answer: C

Explanation:
Explanation
A keepalive OAM probe is a mechanism that can be used to monitor the state of a GRE tunnel and detect any failures in the tunnel path. A keepalive OAM probe consists of sending periodic packets from one end of the tunnel to the other and expecting a reply. If no reply is received within a specified time, the tunnel is considered down and the line protocol of the tunnel interface is changed to down1.
To configure a keepalive OAM probe for a GRE tunnel, you need to specify two parameters: the keepalive-time and the hold-time. The keepalive-time is the interval between each keepalive packet sent by the local router. The hold-time is the maximum time that the local router waits for a reply from the remote router before declaring the tunnel down2.
According to the Juniper Networks documentation, the hold-time value must be two times the keepalive-time value for a GRE tunnel2. This is because the hold-time value must account for both the round-trip time of the keepalive packet and the processing time of the remote router. If the hold-time value is too small, it may cause false positives and unnecessary tunnel flaps.
In the exhibit, the configuration shows that the keepalive-time is set to 10 seconds and the hold-time is set to
15 seconds for the gr-1/1/10.1 interface. This means that the local router will send a keepalive packet every 10 seconds and will wait for 15 seconds for a reply from the remote router. However, this hold-time value is not two times the keepalive-time value, which violates the recommended configuration. This may cause traffic drops if the remote router takes longer than 15 seconds to reply.
Therefore, option D is correct, because the hold-time value must be two times the keepalive-time value for a GRE tunnel. Option A is incorrect, because BFD is not required for GRE tunnels; BFD is another protocol that can be used to monitor tunnels, but it is not compatible with GRE keepalives3. Option B is incorrect, because the "event link-adjacency-loss" option is not related to GRE tunnels; it is an option that can be used to trigger an action when a link goes down4. Option C is incorrect, because LLDP does not need to be removed from the gr-1/1/10.1 interface; LLDP is a protocol that can be used to discover neighboring devices and their capabilities, but it does not interfere with GRE tunnels5.
References:
1: Configuring Keepalive Time and Hold time for a GRE Tunnel Interface 2: keepalive | Junos OS | Juniper Networks 3: Configuring Bidirectional Forwarding Detection 4: event link-adjacency-loss | Junos OS | Juniper Networks 5: Understanding Link Layer Discovery Protocol


NEW QUESTION # 129
Referring to the exhibit, all users connected to the same VLAN can communicate with each other, but not with users on other VLANs in this network.

What must be configured to enable communication between the VLANs?

Answer: B


NEW QUESTION # 130
......

A Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) practice questions is a helpful, proven strategy to crack the Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam successfully. It helps candidates to know their weaknesses and overall performance. GetValidTest software has hundreds of Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam dumps that are useful to practice in real-time. The Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) practice questions have a close resemblance with the actual Enterprise Routing and Switching, Specialist (JNCIS-ENT) (JN0-351) exam.

JN0-351 Passing Score: https://www.getvalidtest.com/JN0-351-exam.html

DOWNLOAD the newest GetValidTest JN0-351 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1carpCgHwwnc3A-s4l7sxn8fEjqah8doy