FreeDumps offers highly designed Huawei H19-404_V1.0 exam questions and online H19-404_V1.0 practice test engine to help you successfully clear the Huawei exam. Their study materials cover all the basic to advanced required H19-404_V1.0 Exam Questions material that you need to know to pass the H19-404_V1.0 Exam. These two simple, easy, and accessible learning formats will boost your confidence.
| Section | Weight | Objectives |
|---|---|---|
| Campus Network Technology Design | 25% | - VLAN, IP addressing and routing design - WLAN planning, coverage and roaming design - QoS, security and high availability design |
| Huawei Campus Network Solutions and Products | 20% | - Switches, WLAN products and AR routers - iMaster NCE-Campus management platform - Xinghe Intelligent Campus Solution overview |
| Solution Promotion and Project Implementation | 15% | - Solution value analysis and competitive differentiation - Deployment guidance and acceptance criteria |
| Scenario-based Campus Network Design | 25% | - Small and medium-sized campus network design - Large campus and multi-branch interconnection design - Cloud-managed and virtualized campus network design |
| Campus Network Planning and Design Fundamentals | 15% | - Service requirements and demand analysis - Campus network architecture and evolution - Network design principles and methodologies |
>> New H19-404_V1.0 Test Registration <<
For years our company is always devoted to provide the best H19-404_V1.0 practice questions to the clients and help them pass the test H19-404_V1.0 certification smoothly. Our company tried its best to recruit the famous industry experts domestically and dedicated excellent personnel to compile the H19-404_V1.0 cram guide and serve for our clients wholeheartedly. Our company sets up the service tenet that customers are our gods and the strict standards for the quality of our H19-404_V1.0 training materials.
NEW QUESTION # 49
Which of the following protocol data packets can be encapsulated in a VPN using GRE?
Answer: A,B,C,D
Explanation:
GRE is a multiprotocol encapsulation mechanism and can carry all the listed packet types. It inserts a GRE header around the original payload and then places the resulting GRE packet inside a delivery-protocol packet. Because the GRE header contains a Protocol Type field identifying the encapsulated payload, GRE is not restricted to ordinary IPv4 unicast traffic.
IPv6 packets can be transported as GRE payloads when supported by the tunnel endpoints. IP unicast traffic is the most common use case. GRE can also carry IP multicast and broadcast packets, which is one of its major advantages over basic IPsec tunnel selectors that traditionally focus on IP unicast traffic. This enables routing protocols, multicast applications, discovery traffic, and other non-unicast services to operate across a logical point-to-point tunnel.
RFC 2784 defines GRE as a general mechanism for encapsulating an arbitrary network-layer protocol over another network-layer protocol. It also defines the Protocol Type field used to identify the carried payload.
Huawei uses GRE as an SD-WAN overlay data-channel option and can additionally secure it using IPsec when confidentiality and integrity are required.
NEW QUESTION # 50
Which of the following are common terminal identification methods?
Answer: A,B,C,D
Explanation:
All four options are recognized terminal identification methods. MAC OUI examines the first three bytes of a device's MAC address to determine its manufacturer, although it generally cannot identify the exact model or operating system. DHCP option identification analyzes fields such as DHCP options 12, 55, and 60, which can reveal the hostname, parameter-request list, vendor class, and other terminal characteristics. SNMP query is an active identification method that retrieves device details from relevant MIB objects and is particularly useful for printers, network devices, and other SNMP-capable equipment.
Nmap is also an active scanning method. It analyzes open ports, service responses, protocol behavior, and operating-system fingerprints to estimate a terminal's device type and OS. Huawei distinguishes information- reporting methods from proactive scanning methods: MAC OUI and DHCP options generally use information observed in traffic, whereas SNMP and Nmap actively query or scan the endpoint. iMaster NCE-Campus can correlate multiple fingerprints to improve identification accuracy and automatically apply terminal-specific access policies.
NEW QUESTION # 51
Which experience-assurance technologies does Huawei SD-WAN provide?
Answer: A,B,C,D
Explanation:
Huawei SD-WAN provides all four technologies. Per-flow load balancing distributes separate application flows among multiple links that have the same priority and satisfy the required SLA. Per-packet load balancing can transmit packets from one flow across multiple eligible links, improving aggregate bandwidth utilization for large file transfers, backups, and replication.
Multi-fed and selective receiving duplicates critical traffic across different links. The receiving device selects valid packets, removes duplicates, and preserves packet order. Packet loss or failure on one path therefore does not interrupt the service, enabling zero-millisecond link switchover in applicable deployments.
A-FEC dynamically generates redundant packets and adjusts the redundancy ratio according to measured packet loss. The receiving device reconstructs lost packets, reducing video freezing and voice-quality deterioration. Huawei describes both adaptive FEC and multi-fed selective receiving as WAN-optimization mechanisms for key traffic.
Intelligent traffic steering selects links according to application identity, quality, bandwidth, priority, and load.
Therefore, A, B, C, and D are all correct.
NEW QUESTION # 52
What are the modes of the HSR RedBox?
Answer: A,B,C,D
Explanation:
An industrial RedBox can provide all four listed interconnection modes. In HSR-SAN mode, it connects a singly attached node that does not natively support High-availability Seamless Redundancy to an HSR network. The RedBox duplicates frames entering the HSR domain and removes duplicate frames before delivering traffic to the SAN.
HSR-PRP mode interconnects an HSR ring with a Parallel Redundancy Protocol network while preserving seamless redundancy. PRP-PRP mode couples two PRP network domains, while HSR-HSR mode connects separate HSR rings. Depending on the implementation, the HSR-HSR interconnection function may also be described as a QuadBox function because four HSR-facing ports can be involved.
The essential RedBox responsibilities are frame conversion, duplication, duplicate elimination, sequence- number handling, and prevention of unintended forwarding loops between redundancy domains. HSR and PRP use compatible duplicate-identification principles, enabling controlled interconnection between these network types without introducing a single point of failure. RedBoxes also provide redundant connectivity for devices that have only one ordinary Ethernet interface.
NEW QUESTION # 53
Which of the following SM-series cryptographic algorithms is supported?
Answer: C
Explanation:
SM4 is the supported SM-series cryptographic algorithm intended by this question. SM4 is a standardized symmetric block cipher that uses a 128-bit block size and a 128-bit key. It is suitable for high-volume data encryption because symmetric cryptography can process service traffic efficiently compared with public-key algorithms.
Within an SD-WAN or IPsec context, the bulk traffic carried through secure data channels requires a symmetric encryption algorithm. SM4 can therefore be used as the encryption component of an approved cryptographic suite where compliance with Chinese commercial cryptography requirements is necessary.
SM2 is an asymmetric public-key cryptographic suite used for functions such as digital signatures, key exchange, and public-key encryption. It is not the bulk data-encryption algorithm requested in this item. SM1 is a restricted proprietary algorithm whose implementation details are not publicly standardized in the same manner, while SM5 is not the supported option represented by the Huawei course question.
Huawei's SD-WAN architecture uses IPsec to protect site-to-site services and supports secure GRE-over- IPsec data channels between edge devices. In the SM-series selection presented here, the correct supported traffic-encryption algorithm is SM4.
NEW QUESTION # 54
......
The opportunity is for those who have patience to wait for. If you got the H19-404_V1.0 certification before your IT career starts, it will be a good preparation for you to find a satisfactory job. It is not easy to Pass H19-404_V1.0 Exam, but with the help of our H19-404_V1.0 study materials provided by our FreeDumps, there are so many candidates have pass the exam. Do you want to be one of them? Let our products to help you.
H19-404_V1.0 Exam Torrent: https://www.freedumps.top/H19-404_V1.0-real-exam.html