A considerable amount of effort goes into our products. So in most cases our NSE7_FSN_AR-7.6 exam study materials are truly your best friend. On one hand, our NSE7_FSN_AR-7.6 learning guide is the combination of the latest knowledge and the newest technology, which could constantly inspire your interest of study. On the other hand, our NSE7_FSN_AR-7.6 test answers can predicate the exam correctly. Therefore you can handle the questions in the real exam like a cork. Through highly effective learning method and easily understanding explanation, you will pass the NSE7_FSN_AR-7.6 Exam with no difficulty. Our slogans are genuinely engraving on our mind that is to help you pass the NSE7_FSN_AR-7.6 exam, and ride on the crest of success!
| Section | Objectives |
|---|---|
| Topic 1: Enterprise Firewall | - Security Fabric integration - Routing and advanced networking - Centralized management and analytics - Troubleshooting - VPN technologies - Advanced firewall deployment - High availability - Authentication and identity |
| Topic 2: SD-WAN | - Overlay VPN - Application steering - Performance SLA - Deployment and troubleshooting - SD-WAN routing - SD-WAN architecture |
>> Pass NSE7_FSN_AR-7.6 Rate <<
Our product boosts varied functions to be convenient for you to master the NSE7_FSN_AR-7.6 training materials and get a good preparation for the exam and they include the self-learning, the self-assessment, stimulating the exam and the timing function. We provide 24-hours online on NSE7_FSN_AR-7.6 Guide prep customer service and the long-distance professional personnel assistance to for the client. If clients have any problems about our NSE7_FSN_AR-7.6 study materials they can contact our customer service anytime.
NEW QUESTION # 158
Exhibit.
Refer to the exhibit, which shows a FortiGate configuration.
An administrator is troubleshooting a web filter issue on FortiGate. The administrator has configured a web filter profile and applied it to a policy; however the web filter is not inspecting any traffic that is passing through the policy.
What must the administrator do to fix the issue?
Answer: C
Explanation:
The exhibit shows a FortiGate configuration under config system fortiguard related to web filtering and FortiGuard options. There is a line:
set webfilter-force-off enable
According to official Fortinet documentation, the " webfilter-force-off " option, when enabled, causes the FortiGate to bypass web filtering for all traffic-even if a web filter profile is applied to a policy.
This override is typically used for troubleshooting or performance reasons and is documented as an explicit bypass feature.
If an administrator wants to enforce web filtering inspection, this setting must be disabled. The correct way to restore web filtering functionality is to run:
set webfilter-force-off disable
Once done, traffic passing through policies with web filter profiles will be inspected and filtered as per configuration. Other settings such as timeout or cache TTL do not bypass web filtering; they only affect operational nuances.
Reference:
FortiOS Administration Guide: Web Filtering, FortiGuard Options, "webfilter-force-off" CLI
NEW QUESTION # 159
Refer to the exhibit.
A partial output of diagnose npu up6 port-list on FortiGate 2000E is shown.
An administrator is unable to analyze traffic flowing between port1 and port17 using the diagnose sniffer command.
Which two commands allow the administrator to view the traffic? (Choose two.)
Answer: A,B
Explanation:
The administrator cannot see traffic in the sniffer because it is being offloaded to the NPU (NP6). To view the traffic, offloading must be disabled so packets pass through the CPU.
B). config firewall policy ... set auto-asic-offload disable: This is the recommended method to troubleshoot specific traffic. By disabling ASIC offloading in the relevant firewall policies (Policies 5 and 17 in the exhibit), traffic is forced to the CPU and becomes visible to the sniffer.
C). diagnose npu np6 fastpath disable 1: This command temporarily disables the fastpath processing on the specific NP6 processor (ID 1) handling the ports. This forces all traffic handled by that NPU to the CPU, allowing the sniffer to capture it.
Incorrect Options: Option A uses invalid syntax (port-list disable is not a valid command). Option D (config system npu) is not the standard method for granular troubleshooting.
NEW QUESTION # 160
In a Security Fabric environment which three actions must you take to ensure successful communication among the nodes? (Choose three.)
Answer: B,D,E
Explanation:
To establish a functional Security Fabric, specific network and configuration prerequisites must be met to ensure nodes can communicate, authorize, and share telemetry data:
A). You must ensure that TCP port 8013 is not blocked along the way:
TCP port 8013 is the dedicated port for FortiTelemetry (Fabric) communication. If firewalls (intermediate or local) block this port, the Fabric connection between the root and downstream FortiGates will fail.
D). You must authorize the downstream FortiGate on the root FortiGate:
Security Fabric relies on a trust relationship. When a downstream device attempts to join, it appears in the Root FortiGate ' s dashboard. The administrator must manually authorize this device (unless pre-authorized via serial number) to allow it to join the Fabric topology.
E). You must enable FortiTelemetry on the receiving interface of the upstream FortiGate:
The interface on the Root (upstream) FortiGate that faces the downstream devices must have the " Security Fabric Connection " (formerly CAPWAP/FortiTelemetry) administrative access setting enabled. Without this, the interface will not listen for or accept Fabric connection requests.
Why other options are incorrect:
B: Neighbor Discovery uses standard multicast/broadcast or static settings; changing the port is not a standard requirement.
C: FortiGates can participate in the Security Fabric in either NAT or Transparent mode; Transparent mode is not a mandatory requirement for the Fabric itself.
Reference:
FortiGate Security 7.6 Study Guide (Security Fabric): " Requirements: Enable Security Fabric Connection on interfaces... Authorize downstream devices... Ensure TCP 8013 is allowed. "
NEW QUESTION # 161
Refer to the exhibit.
Which two observations can you make about the web filter traffic captured using the flow tool? (Choose two.)
Answer: A,D
Explanation:
Analyze the " Send to Application Layer " Message:
The most critical line in the debug output is: id=65308 ... func=av_receive ... msg= " send to application layer
"
Meaning: This message indicates that the FortiGate kernel is handing the packet over to a user-space daemon (specifically the WAD/Proxy process, indicated by av_receive handlers) for deep inspection.
Implication: This behavior is the hallmark of Proxy-based inspection. In Flow-based inspection, the traffic is handled by the IPS engine (often within the kernel or via specific IPS handlers like ips_measure), and you would not typically see a " send to application layer " message for standard web filtering.
Evaluate Option B (Firewall Policy Mode):
Since the traffic is being sent to the application layer proxy, the Firewall Policy controlling this traffic (Policy ID 1, as seen in Allowed by Policy-1) must be configured with Inspection Mode = Proxy. If it were Flow- based, the traffic would stay in the flow path. Thus, Option B is correct.
Evaluate Option C (Web Filter Profile Mode):
In FortiOS, when a firewall policy is set to Proxy-based inspection, the security profiles (like Web Filter) applied to that policy also operate in Proxy-based inspection mode. The presence of the av_receive function confirms that the content inspection (Web Filter/AV) is being performed by the proxy engine. Thus, Option C is correct.
Why Option A is Incorrect (NPU Offload):
The output shows npu_state=0x100. In the context of a flow trace where traffic is being " sent to application layer, " this confirms the session is not fully offloaded to the NPU (Network Processor). Offloaded traffic (Fast Path) is handled by the hardware and would not generate these specific CPU-level debug logs for the payload inspection phase. The proxying process requires CPU intervention.
Why Option D is Incorrect (Port Mapping):
While valid protocol mapping is necessary for inspection, the specific debug output shown is a direct result of the Inspection Mode (Proxy vs. Flow). The observation of the traffic moving to the application layer is primarily caused by the policy and profile mode settings, making B and C the direct " observations " derived from the log data.
Reference:
FortiGate Troubleshooting (Debug Flow): " If the debug flow shows msg= ' send to application layer ' , it confirms the traffic is being handled by the proxy (WAD) for Proxy-based inspection. "
NEW QUESTION # 162
Refer to the exhibit, which shows one way communication of the downstream FortiGate with the upstream FortiGate within a Security Fabric.
What three actions must you take to ensure successful communication? (Choose three.)
Answer: A,D,E
NEW QUESTION # 163
......
To save resources of our customers, we offer real Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam questions that are enough to master for NSE7_FSN_AR-7.6 certification exam. Our Fortinet NSE7_FSN_AR-7.6 Exam Dumps are designed by experienced industry professionals and are regularly updated to reflect the latest changes in the Building Fortinet NSE 7 - Secure Networking 7.6 Architect (NSE7_FSN_AR-7.6) exam content.
NSE7_FSN_AR-7.6 Detail Explanation: https://www.2pass4sure.com/NSE-7-Network-Security-Architect/NSE7_FSN_AR-7.6-actual-exam-braindumps.html