Exam JN0-336 Tutorials - JN0-336 Test Simulator Online

P.S. Free & New JN0-336 dumps are available on Google Drive shared by BraindumpQuiz: https://drive.google.com/open?id=1PDiX7cmrU0OOlriQBoAG0iQ1SwdzXCxz

According to our investigation, the test syllabus of the JN0-336 exam is changing every year. Some new knowledge will be added into the annual real exam. Some old knowledge will be deleted. So you must have a clear understanding of the test syllabus of the JN0-336 study materials. Now, you can directly refer to our study materials. Our experts have carefully researched each part of the test syllabus of the JN0-336 Study Materials. Then they compile new questions and answers of the study materials according to the new knowledge parts.

Juniper JN0-336 Exam Syllabus Topics:

Section	Objectives
Topic 1: High Availability (HA) Clustering	- Chassis cluster operations 1. State synchronization 2. Real-time objects - HA fundamentals 1. HA features and characteristics 2. Deployment requirements
Topic 2: Identity-Aware Security Policies	- Identity concepts 1. Ports and protocols 2. Data flow 3. Juniper Identity Management Service (JIMS)
Topic 3: Intrusion Detection and Prevention (IDP)	- IDP concepts and architecture 1. Monitoring and troubleshooting IDP 2. IDP policy configuration and operation 3. IDP database management
Topic 4: Security Director (Junos Space)	- Management platform 1. Deployment options 2. Policy management 3. Device onboarding
Topic 5: IPsec VPN	- Operations and troubleshooting 1. Configuration and validation 2. Debugging and monitoring - IPsec fundamentals and deployment 1. Juniper Secure Connect 2. IPsec tunnel establishment 3. Site-to-site VPNs 4. IPsec traffic processing
Topic 6: Juniper Advanced Threat Prevention (ATP) Cloud	- ATP Cloud concepts 1. Adaptive threat profiling 2. Traffic remediation 3. Security feeds - Operations 1. Configuration, monitoring, troubleshooting
Topic 7: SSL Proxy	- SSL inspection concepts 1. Certificates 2. Client and server protection

>> Exam JN0-336 Tutorials <<

JN0-336 Test Simulator Online, JN0-336 Examcollection Free Dumps

Now you don't need to spend too much time and money preparing for the Juniper JN0-336 test. Just get the latest JN0-336 exam dumps from BraindumpQuiz and prepare the JN0-336 test in a very short time. These Customer Experience (Juniper) JN0-336 updated dumps will eliminate your risk of failing and enhance your chance of success in the BraindumpQuiz test. Using Juniper JN0-336 Exam study material you will gain the best Juniper JN0-336 exam knowledge and you will attempt the final JN0-336 certification test with confidence.

Juniper Security, Specialist (JNCIS-SEC) Sample Questions (Q29-Q34):

NEW QUESTION # 29
You want to include a custom attack object named Custom-FTP-Attack and set the action to drop the packet.

Referring to the exhibit, which modifications would you make?

A. Add custom-attack Custom-FTP-Attack to the notification section and change the action to drop-packet.
B. Add custom-attack Custom-FTP-Attack to the action section and change the action to drop-packet.
C. Add custom-attack Custom-FTP-Attack to the attacks section and change the action to close-client.
D. Add custom-attack Custom-FTP-Attack to the attacks section and change the action to drop-packet.

Answer: D

Explanation:
The correct answer is B. Add custom-attack Custom-FTP-Attack to the attacks section and change the action to drop-packet. In the exhibit, the IDP rule is built under rulebase-ips with a match block and a then block.
Attack objects belong inside the match attacks hierarchy because they define what malicious pattern the IDP rule is trying to detect. Juniper's IDP documentation states that attack objects are specified in rules to identify malicious activity and that the rule's attack objects/groups are the attacks the device matches in monitored traffic.
The enforcement behavior belongs in the then action hierarchy. The current rule uses close-client; to meet the requirement, it must be changed to drop-packet. Juniper defines Drop Packet as an IDP action that drops a matching packet before it reaches its destination without closing the connection. Option A keeps the wrong action. Option C is structurally wrong because a custom attack object is not configured under the action section. Option D is also wrong because the notification section controls logging/alert behavior, not attack matching. Reference topics: IDP rulebase, custom attack objects, match attacks hierarchy, IDP actions, drop- packet behavior.

NEW QUESTION # 30
What are two causes that end the processing of rules in IDP? (Choose two.)

A. when a terminal rule is matched in the rule base
B. when a rule is matched in the rule base with an action of close
C. when any rule is matched in the exempt rule base
D. when a rule is matched in the rule base with an action of ignore

Answer: A,D

Explanation:
The correct answers are B and D. A terminal rule is specifically designed to stop further rule evaluation.
Juniper states that the IDP rule-matching algorithm normally checks traffic against all matching rules in the rulebase, but when a terminal rule matches the source, destination, zones, and application, IDP does not continue to check subsequent rules for that same traffic. Juniper also warns that traffic matching a terminal rule is not compared to later rules even if it does not match the attack object inside that terminal rule.
Option D is also correct because the Ignore Connection action stops scanning traffic for the rest of the connection if an attack match is found. Juniper defines Ignore Connection as disabling the rulebase for that specific connection after a match. Option A is wrong because a close action closes the connection by sending reset behavior, but it is not the rule-processing control mechanism being tested. Option C is a trap: the exempt rulebase is used to suppress known false positives after an IPS rule match, but the two direct mechanisms that end IDP rule processing are terminal rule matching and ignore connection. Reference topics: IDP rulebases, terminal rules, Ignore Connection action, rule-matching algorithm, false-positive exemption.

NEW QUESTION # 31
You are asked to set up SSL proxy in SRX Series devices. An SSL proxy profile is already defined for you.
Which two steps are required to complete the setup? (Choose two.)

A. Reference the SSL proxy profile in a security zone.
B. Enable host-inbound-traffic HTTPS in the security zone in which SSL proxy is referenced.
C. Enable any Layer 7 services in the security policy in which SSL proxy is referenced.
D. Reference the SSL proxy profile in a security policy.

Answer: C,D

NEW QUESTION # 32
Your network uses a single JSA host and you want to implement a cluster.
In this scenario, which two statements are correct? (Choose two.)

A. The primary and secondary hosts must be configured with the same storage devices.
B. The cluster virtual IP will need an unused IP address assigned.
C. The software versions on both primary and secondary hosts
D. The secondary host can backup multiple JSA primary hosts.

Answer: B,C

Explanation:
According to the Juniper Networks JNCIP-SEC Study Guide, when setting up a cluster with a single JSA host, both the primary and secondary hosts must have the same software version installed. Additionally, an unused IP address must be assigned to the cluster virtual IP. The primary and secondary hosts do not need to be configured with the same storage devices, and the secondary host cannot be used to backup multiple JSA primary hosts.

NEW QUESTION # 33
Click the Exhibit button.

Which two statements describe the output shown in the exhibit? (Choose two.)

A. Redundancy group 1 experienced an operational failure.
B. Node 0 is controlling traffic for redundancy group 1.
C. Redundancy group 1 was administratively failed over.
D. Node 1 is controlling traffic for redundancy group 1.

Answer: B,D

Explanation:
The output indicates that node1 has a priority of 200 and is marked as "Primary," which means it is currently the active node controlling traffic for redundancy group 1. The "Primary" status designates that this node is handling the traffic for the specified redundancy group.
According to the exhibit, node0 is listed with a priority of 0 and is marked as "Secondary." This status indicates that node0 is currently not controlling traffic for redundancy group 1, serving instead in a standby role ready to take over should node1 fail or become unavailable.

NEW QUESTION # 34
......

The value of professional qualification has been shown to rise with time. For the advancement of your profession, exams like the Juniper exam given by Juniper are crucial. Candidates aim to pass the Security, Specialist (JNCIS-SEC) exam on their first attempt. With Juniper JN0-336 Exam Questions, applicants may study for and pass their desired certification exam on the first attempt. You may use BraindumpQuiz's top JN0-336 study resources to prepare for the Security, Specialist (JNCIS-SEC) exam. The Juniper JN0-336 exam questions offered by BraindumpQuiz are dependable and trustworthy sources of preparation.

JN0-336 Test Simulator Online: https://www.braindumpquiz.com/JN0-336-exam-material.html

2026 Latest BraindumpQuiz JN0-336 PDF Dumps and JN0-336 Exam Engine Free Share: https://drive.google.com/open?id=1PDiX7cmrU0OOlriQBoAG0iQ1SwdzXCxz