If you are planning to pass the NSEI_OTS_AR-7.6 exam, you can choose our NSEI_OTS_AR-7.6 practice materials as your learning material since our products are known as the most valid exam engine in the world, which will definitely be beneficial to your preparation for exams. There are many impressive advantages of our NSEI_OTS_AR-7.6 Study Guide. And our NSEI_OTS_AR-7.6 actual exam will be definitely conducive to realizing the dream of obtaining the certificate.
| Section | Weight | Objectives |
|---|---|---|
| Monitoring and Risk Assessment | 25% | - Threat detection using FortiSIEM 7.4 - OT-focused risk assessment and management - Event handling and logging with FortiAnalyzer 7.6 |
| Network Security | 25% | - Virtual patching for legacy OT systems - Security automation and threat response - Deep inspection for industrial protocols (Modbus, DNP3, OPC) |
| Network Access Control | 25% | - Purdue Model and secure network segmentation - OT Ethernet and industrial communication models - Authentication and access policies for OT devices |
| Asset Management | 25% | - Fortinet Security Fabric for OT environments - Device detection and inventory using FortiGate & FortiNAC - OT security standards and compliance (IEC 62443, NIST) |
>> NSEI_OTS_AR-7.6 Reliable Braindumps Sheet <<
The Internet is increasingly becoming a platform for us to work and learn, while many products are unreasonable in web design, and too much information is not properly classified. It's disorganized. Our NSEI_OTS_AR-7.6 study materials draw lessons from the experience of failure, will all kinds of qualification examination has carried on the classification of clear layout, at the same time the user when they entered the NSEI_OTS_AR-7.6 Study Materials page in the test module classification of clear, convenient to use a very short time to find what they want to study, which began the next exercise.
NEW QUESTION # 45
Refer to the exhibits.
A partial Basic Event Handler page on FortiAnalyzer and the creation of a trigger in a FortiGate device are shown. To improve the protection of your OT network, you want to automate the handling of compromised devices notified through FortiAnalyzer. You have configured an event handler named Alert_trigger as shown in the exhibit. When you create the trigger on the FortiGate device, the Event handler name field does not provide the Alert_trigger option. What two actions must you perform to make the Alert_trigger option available? (Choose two answers)
Answer: A,D
Explanation:
The correct answers are C and D .
Option C is correct because the study guide explains that when "a handler generates an event with the automation stitch option enabled, FortiAnalyzer sends a notification" and, in the Security Fabric workflow, "FortiAnalyzer parses the logs and notifies the root FortiGate." This means FortiGate must first have the FortiAnalyzer connection configured so it can consume FortiAnalyzer event handlers and use them in automation. The wizard message in the exhibit also points to this requirement by indicating that a FortiAnalyzer connection must be configured.
Option D is also correct because the study guide explicitly says that in this automation flow "the root FortiGate triggers the action" and shows "Stitches configured on root FortiGate." Therefore, if you want the FortiAnalyzer event handler to appear and be usable for automation, the trigger must be configured on the root FortiGate , not on an arbitrary downstream FortiGate.
Option A is incorrect because + Create is only a GUI control and does not solve the missing-event-handler visibility problem. Option B is not identified in the study guide as the requirement for making a FortiAnalyzer event handler available in the FortiGate automation trigger list.
NEW QUESTION # 46
You want to improve the security of your OT network and therefore deploy a FortiGate device with the OT signatures database. Which two statements about this database are true? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and D .
Option A is correct because the study guide states that for OT protocol coverage, "a valid OT security service license is required to receive updates on both intrusion prevention and application control signatures." It also shows "Valid license required" in the FortiGuard subscriptions section for OT protocol coverage. This confirms that a valid OT security service license is required to use and maintain the OT signatures database correctly.
Option D is also correct because the guide explicitly shows the CLI configuration used "To enable OT signatures" :
config ips global
set exclude-signatures none
end
It then states that "By default, OT signatures are excluded from the signatures lists on the GUI until you enable them on the CLI." This directly confirms that you must set exclude-signatures to none in the CLI to enable OT signatures.
Option B is incorrect because the study guide does not say you manually import the OT signatures database.
Instead, it explains that FortiGuard maintains updated OT signatures and that a valid license is required to receive updates. Option C is incorrect because the guide clearly says OT signatures are excluded by default until enabled from the CLI.
NEW QUESTION # 47
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,B
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 48
What is the next step if FortiGate cannot detect a device locally? (Choose one answer)
Answer: C
NEW QUESTION # 49
Which industrial protocol does not support VLANs? (Choose one answer)
Answer: D
Explanation:
The correct answer is C. EtherCAT .
The study guide states that for industrial Ethernet protocols, "such as Ethernet/IP and Modbus/TCP, you can use VLANs to segment your physical LAN into multiple logical LANs." This directly confirms that Ethernet/IP and Modbus/TCP support VLAN-based segmentation in the OT context.
By contrast, the guide explains that "EtherCAT skips layers 3 to 6 to deliver real-time communication" and describes it as an "Open-Software Modified-Ethernet" approach. Because it does not operate like the standard Ethernet/IP model used for normal VLAN-based segmentation, EtherCAT is the protocol identified here as not supporting VLANs in the way Ethernet/IP and Modbus/TCP do.
So, based on the study guide comparison, the verified answer is EtherCAT .
NEW QUESTION # 50
......
A lot of office workers in their own professional development encounter bottleneck and begin to choose to continue to get the test NSEI_OTS_AR-7.6 certification to the school for further study. We all understand the importance of education, and it is essential to get the NSEI_OTS_AR-7.6 certification. Our NSEI_OTS_AR-7.6 study tools not only provide all candidates with high pass rate study materials, but also provide them with good service. If you have some question or doubt about us or our products, you can contact us to solve it. The thoughtfulness of our NSEI_OTS_AR-7.6 Study Guide services is insuperable. What we do surly contribute to the success of NSEI_OTS_AR-7.6 practice materials.
Braindumps NSEI_OTS_AR-7.6 Torrent: https://www.braindumpsvce.com/NSEI_OTS_AR-7.6_exam-dumps-torrent.html