DOWNLOAD the newest Prep4pass NSE7_FSN_AR-7.6 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1k5-13cYOcHX15N8LMUNvz-g6Xw-uBLLJ
After using our NSE7_FSN_AR-7.6 study materials, you will feel your changes. These changes will increase your confidence in continuing your studies on NSE7_FSN_AR-7.6 real exam. Believe me, as long as you work hard enough, you can certainly pass the exam in the shortest possible time. The rest of the time, you can use to seize more opportunities. As long as you choose NSE7_FSN_AR-7.6 simulating exam, we will be responsible to you.
| Section | Objectives |
|---|---|
| Topic 1: SD-WAN | - SD-WAN deployment
|
| Topic 2: Enterprise Firewall | - Routing and VPN
|
>> PDF NSE7_FSN_AR-7.6 Cram Exam <<
Our NSE7_FSN_AR-7.6 study materials will be very useful for all people to improve their learning efficiency. If you do all things with efficient, you will have a promotion easily. If you want to spend less time on preparing for your NSE7_FSN_AR-7.6 exam, if you want to pass your exam and get the certification in a short time, our NSE7_FSN_AR-7.6 learning braindumps will be your best choice to help you achieve your dream. Don't hesitate, you will be satisfied with our NSE7_FSN_AR-7.6 exam questions!
NEW QUESTION # 31
Refer to the exhibit.
The exhibit shows a session entry. Which statement about this TCP session is true?
Answer: C
Explanation:
The correct answer is C. The session is offloaded using NPU.
The exact session example in the study guide shows:
proto=6 # this is a TCP session
expire=3599 # the session will expire in 3599 seconds, not in one second hook=post dir=org act=snat 10.9.31.117:45388- > 200.8.57.5:443(10.1.0.3:45388) hook=pre dir=reply act=dnat 200.8.57.5:443- > 10.1.0.3:45388(10.9.31.117:45388) npu info: ... offload=8/8 ...
and the slide explicitly states: "Offloaded in both directions using NP6" The study guide also explains this exact point clearly:
"Counters for hardware acceleration-The presence of the npu info field indicates the session has been offloaded to hardware acceleration. In this example, traffic is being offloaded in both directions using network processor (NP) 6, which is represented by the value of 8." Why the other options are wrong:
A is wrong because expire=3599, not 1. The duration=1 field means the session has existed for 1 second, not that it will expire in 1 second.
B is wrong because the original session is from 10.9.31.117 to the remote server 200.8.57.5:443. The IP
10.1.0.3 is the SNAT-translated source address, not the final destination.
D is not the best answer for this single-select question. The reply is indeed DNATed back toward the original client, but the exact validated takeaway highlighted by the study guide for this exhibit is the NPU offload state.
NEW QUESTION # 32
Which three common FortiGate-to-collector-agent connectivity issues can you identify using the FSSO real- time debug? (Choose three.)
Answer: A,B,D
NEW QUESTION # 33
Refer to the exhibits.
Exhibit - Interface configuration and FortiGate routing table
Video exhibit showing port2 preserve-session-route configuration and the FortiGate routing table with two default routes.
The administrator increases the member priority on port2 to 20.
Assuming the route egressing port2 is still valid, upon configuration changes and the receipt of new packets, which two actions does FortiGate perform on existing sessions established over port2? (Choose two.)
Answer: B,D
Explanation:
" The result is that the gateway address will not be updated, unless the existing gateway is no longer valid " The study guide identifies preserve-session-route as the configuration responsible for this behavior.
Technical Explanation:
The exhibit shows two WAN interfaces, port1 and port2, with static default routes.
Originally, both interfaces participate in routing with equal priority. The administrator changes the priority of port2 to 20, making port1 the preferred interface for new route selections.
However, the existing sessions were established using port2, and its interface configuration includes:
config system interface
edit " port2 "
set preserve-session-route enable
next
end
Option A is correct: The preserve-session-route setting enables interface stickiness for sessions using port2.
Because the original gateway and route remain valid, FortiGate preserves the existing sessions ' routing information and continues forwarding them through port2.
Option B is correct: Increasing the priority value on port2 makes it less preferred than port1. Consequently, new sessions that use the relevant default route are directed through port1.
Why the other options are incorrect:
Option C: FortiGate does not automatically update existing SNAT session gateway information merely because a more preferred path becomes available. The guide identifies snat-route-change as a separate setting used to permit appropriate SNAT route updates.
Option D: A route change can cause affected sessions to be marked dirty and reevaluated, but it is not accurate to conclude that every session is necessarily marked dirty or that dirty status overrides interface stickiness.
Option E: SNAT session dirty-state handling does not depend exclusively on using an IP pool. Interface-based SNAT sessions can also be affected by routing changes.
Architectural Consideration:
This distinction is important for SD-WAN failback design. Preserving established sessions can help maintain connection continuity, but it can also prevent traffic from returning to a preferred WAN interface until the session ends or the preserved route becomes invalid.
References: SD-WAN 7.6 Enterprise Administrator Study Guide, Solution Slides, pages 281, 293, and 297-
300.
NEW QUESTION # 34
Refer to the exhibit, which shows the output of get router info bgp summary.
Which two statements are true? (Choose two.)
Answer: A,D
Explanation:
The get router info bgp summary output lists BGP neighbor status:
Prefix Reception: The " State/PfxRcd " column shows the number of prefixes received from the neighbor- neighbor 100.64.1.254 has " 1 " , confirming option A.
Received Message Count: Under " MsgRcvd " , 18 packets have been received from neighbor 100.64.1.254.
This matches option C.
The second neighbor 100.64.2.254 is in " Active " state and has received/sent 0 packets, indicating that its TCP connection is NOT established, disproving option B.
There is no indication anywhere that the router is " still calculating " prefixes; " Active " just means no session is established, so option D is incorrect.
References:
FortiOS BGP Command Reference: BGP Neighbor States, PfxRcd, and Counters
NEW QUESTION # 35
Which two protocol states indicate that traffic is bidirectional? (Choose two.)
Answer: C,D
Explanation:
The correct answers are A and B.
For UDP, the study guide states this directly: "For UDP, the session state can have only two values: 00 when traffic is only one way, and 01 when traffic is two ways. For ICMP, the protocol state is always 00." That makes B correct and D incorrect.
For TCP, the study guide explains that the protocol state is a two-digit number, where the first digit is the server-side state and the second digit is the client-side state. It also states that the first digit is 0 when the session is not subject to any inspection, and the TCP state table shows that value 1 = ESTABLISHED So, for a normal non-proxied/non-inspected TCP session, proto_state=01 means the TCP session is in the ESTABLISHED state. An established TCP session means the three-way handshake has completed, which requires traffic in both directions. That is why A is correct.
The study guide also says: "proto_state=11 means that the TCP three-way handshake for both server-side and client-side is completed (ESTABLISHED)." This confirms that TCP state value 1 represents an established state.
Why C is not selected: the study guide defines value 5 as TIME_WAIT and says: "When a session is closed by both the sender and receiver, FortiGate keeps that session in the session table for a few seconds... This is the state value 5." So proto_state=05 represents a closing/closed TCP session in TIME_WAIT, not the normal bidirectional state the question is testing.
Therefore, the verified answers are A and B.
NEW QUESTION # 36
......
The Fortinet NSE 7 - Secure Networking 7.6 Architect can advance your professional standing. Passing the Fortinet NSE7_FSN_AR-7.6 exam is the requirement to become Fortinet Professionals and to get your name included. Practicing with Fortinet NSE7_FSN_AR-7.6 Dumps is considered the best strategy to test the exam readiness. After passing the NSE7_FSN_AR-7.6 exam you will become a valuable asset for the company you work for or want to work. You don't need to sacrifice your job hours or travel to distant training institutes for exam preparation when you have Fortinet NSE7_FSN_AR-7.6 Dumps for instant success. These NSE7_FSN_AR-7.6 dumps questions with authentic answers are compiled by Fortinet professionals and follow the actual exam’s questioning style.
Relevant NSE7_FSN_AR-7.6 Exam Dumps: https://www.prep4pass.com/NSE7_FSN_AR-7.6_exam-braindumps.html
What's more, part of that Prep4pass NSE7_FSN_AR-7.6 dumps now are free: https://drive.google.com/open?id=1k5-13cYOcHX15N8LMUNvz-g6Xw-uBLLJ