Authoritative New JN0-364 Exam Guide & Leading Offer in Qualification Exams & Updated JN0-364: Service Provider Routing and Switching, Specialist (JNCIS-SP)

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by DumpTorrent: https://drive.google.com/open?id=1CgTs7rVhUD6jGOFqz582dLRmaPA4gJr7

Juniper JN0-364 certification exam opens the doors for starting a bright career in the sector. After passing the Juniper JN0-364 test you will easily apply for good jobs in top companies all over the world. Juniper JN0-364 exam offers multiple advantages including, high salaries, promotions, enhancing resumes, and skills improvement. Once you pass the JN0-364 Exam, you can avail all these benefits. If you want to pass the Juniper JN0-364 certification exam, you must find the best resource to prepare for the Juniper JN0-364 test.

Juniper JN0-364 Exam Syllabus Topics:

Section	Objectives
Topic 1: Spanning Tree Protocols	- Identify the concepts, operation, or functionality of STP 1. MSTP 2. STP 3. RSTP 4. VSTP - Demonstrate knowledge of how to configure, monitor, or troubleshoot Spanning Tree Protocols 1. MSTP 2. STP 3. RSTP 4. VSTP
Topic 2: IPv6	- Identify the concepts, operation, or functionality of IPv6 1. Dynamic routing - OSPFv3, IS-IS, BGP 2. IPv6 over IPv4 tunneling 3. Static routes - Demonstrate knowledge of how to configure, monitor, or troubleshoot IPv6
Topic 3: Intermediate System to Intermediate System (IS-IS)	- Demonstrate knowledge of how to configure, monitor, or troubleshoot IS-IS 1. Troubleshooting tools 2. Interfaces and adjacencies 3. Routing policy application - Identify the concepts, operation, or functionality of IS-IS 1. Levels and areas 2. Type, length, values (TLVs) 3. Link-state database 4. IS-IS protocol data units (PDUs) 5. Designated intermediate system (DIS) 6. Adjacencies and neighbors 7. Metrics
Topic 4: Open Shortest Path First (OSPF)	- Identify the concepts, operation, or functionality of OSPF 1. OSPF area and router types 2. Link-state database 3. Router ID 4. OSPF packet types 5. Adjacencies and neighbors 6. Designated router and backup designated router 7. Link-state advertisement (LSA) packet type - Demonstrate knowledge of how to configure, monitor, or troubleshoot OSPF 1. Troubleshooting tools 2. Interfaces and neighbor 3. Routing policy application
Topic 5: Multiprotocol Label Switching (MPLS)	- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS 1. RSVP-signaled Label-Switched Paths (LSPs) 2. MPLS forwarding 3. Shortest path segment-routing LSPs 4. LDP-signaled Label-Switched Paths (LSPs) - Identify the concepts, operation, or functionality of MPLS CoS processing on Junos devices 1. MPLS terminology 2. End-to-end packet flow and forwarding 3. RSVP 4. LDP 5. MPLS packet header 6. Segment routing with MPLS 7. MPLS and routing tables 8. Labels and the label information base
Topic 6: Layer 2 Bridging or VLANs	- Identify the concepts, benefits, or functionality of VLANs 1. Port modes 2. Integrated Routing and Bridging (IRB) 3. Tagging - Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs 1. Provider bridging 2. Interfaces and ports 3. IRB 4. VLANs - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS 1. Frame processing 2. Virtual Switches 3. Provider bridging (Q-in-Q tunneling) 4. Bridging elements and terminology 5. Service provider switching platforms
Topic 7: Protocol-Independent Routing	- Identify the concepts, operation, or functionality of various protocol-independent routing components 1. Static, aggregate, and generated routes 2. Martian addresses 3. Routing instances, including routing information base (RIB) (also known as routing table) group 4. Load balancing 5. Filter-based forwarding - Demonstrate knowledge of how to configure, monitor, or troubleshoot various protocol-independent routing components 1. Static, aggregate, and generated routes 2. Load balancing 3. Filter-based forwarding
Topic 8: Border Gateway Protocol (BGP)	- Identify the concepts, operation, or functionality of BGP 1. Route selection process 2. Attributes 3. IBGP and EBGP functionality and interaction 4. BGP message types 5. BGP route reflection and confederations 6. BGP basic operation - Demonstrate knowledge of how to configure, monitor, or troubleshoot BGP 1. Troubleshooting tools 2. Peers and peer groups 3. Routing policy application

>> New JN0-364 Exam Guide <<

JN0-364 Braindumps Torrent - Clearer JN0-364 Explanation

Our JN0-364 Online test engine is convenient and easy to learn, it supports all web browsers. If you want, you can have offline practice. One of the most outstanding features of JN0-364 Online test engine is it has testing history and performance review. You can have general review of what you have learnt. Besides, JN0-364 Exam Braindumps offer you free demo to have a try before buying. You can get the downloading link and password within ten minutes after payment. JN0-364 exam dumps contain both questions and answers, and it’s convenient for you to check your answers.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q125-Q130):

NEW QUESTION # 125
Referring to the exhibit. Which two statements are correct about the information shown in the exhibit? (Choose two.)

A. The root bridge is reachable using the ge-0/0/14 interface.
B. This switch is the root bridge for this spanning tree topology.
C. The root bridge's priority Is 4k.
D. This switch has a bridge priority of 8k.

Answer: A,D

Explanation:
The exhibit shows the output of the command show spanning-tree bridge, which provides information about the spanning tree status of the switch. From the output, we can see that the switch has a bridge ID different from the root ID, which implies that this switch is not the root bridge. The "Topology change initiator" field shows ge-0/0/14, which indicates that the last topology change occurred on this interface, and this is also the interface used to reach the root bridge.

NEW QUESTION # 126
You are asked to add next-hop redundancy using VRRP for an IPv6 enabled service. The configured primary router must always be active when available, and the servers connected to the network must be able to ping their gateway.
Which VRRP element is required to accomplish this requirement?

A. Both routers running VRRP will require a static ARP entry to be configured for the VRRP VIP
B. The preemptparameter must be added to the VRRP configuration.
C. The accept-dataparameter must be added to the VRRP configuration.
D. The backup router requires the trackparameter to track the primary router's interface.

Answer: B

Explanation:
The preempt function ensures that the router with the higher priority automatically resumes the master role when it becomes available again. This guarantees that the configured primary router always becomes the active VRRP router whenever it is operational, satisfying the requirement that the primary router must always be active when available.

NEW QUESTION # 127
You are asked to configure interfaces on Juniper devices to support dual VLAN tags. In this scenario, which two interface statements would accomplish this task? (Choose two.)

A. flexible-vlan-tagging
B. gigether-options
C. vlan-tagging
D. stacked-vlan-tagging

Answer: A,D

Explanation:
To supportdual VLAN tagging(often referred to as Q-in-Q or 802.1ad), a Juniper interface must be configured to process more than one 802.1Q header. In Junos OS, this is handled at the physical interface level ([edit interfaces <interface-name>]).
According to Juniper Service Provider documents, two primary configuration statements enable this capability:
* stacked-vlan-tagging (Option D):This is the traditional command used to enable an interface to accept frames with two VLAN tags. When this is enabled, the router expects an outer "service" tag and an inner "customer" tag. This is specifically used in provider edge scenarios where a service provider is tunneling multiple customer VLANs.
* flexible-vlan-tagging (Option A):This is a more modern and versatile command. It allows the interface to support a mix of different encapsulation types across different logical units. For example, with flexible-vlan-tagging, you can have one logical unit (unit 10) doing standard single-tagging and another logical unit (unit 20) doing dual-tagging (vlan-tags outer X inner Y). This is the preferred method on newer hardware (like the MX Series) because it provides the highest level of configuration flexibility.
Vlan-tagging (Option C)only enables the interface to support a single 802.1Q tag, andgigether-options (Option B)contains physical-layer settings like auto-negotiation or flow control, which do not influence VLAN encapsulation. Therefore, A and D are the correct mechanisms for enabling dual-tag support.

NEW QUESTION # 128
What information is determined by using the AS path attribute included in the BGP update message? (Choose two.)

A. the total number of next-hop devices to reach a prefix
B. the shortest AS path to reach a prefix
C. the presence of a routing loop
D. the origin of a route from IGP or EGP

Answer: B,C

Explanation:
The AS path attribute lists the autonomous systems that a route advertisement has traversed.
Routers use this attribute to detect routing loops by checking if their own AS number appears in the path.
The AS path length is also used in the BGP best-path selection process, where routes with shorter AS paths are preferred because they represent fewer AS hops to reach the destination prefix.

NEW QUESTION # 129
Which two steps are required to enable MPLS on a physical interface in Junos? (Choose two.)

A. Add the interface under protocols mpls.
B. Add family mpls on the interface.
C. Add family mpls on the loopback interface.
D. Add the loopback interface under protocols mpls.

Answer: A,B

Explanation:
To enable MPLS on a physical interface in Junos, the family mpls statement must be added to the interface configuration. Additionally, the interface itself must be specified under the protocols mpls section of the configuration.

NEW QUESTION # 130
......

We provide the JN0-364 study materials which are easy to be mastered, professional expert team and first-rate service to make you get an easy and efficient learning and preparation for the JN0-364 test. Our product’s price is affordable and we provide the wonderful service before and after the sale to let you have a good understanding of our JN0-364 Study Materials before your purchase, you had better to have a try on our free demos.

JN0-364 Braindumps Torrent: https://www.dumptorrent.com/JN0-364-braindumps-torrent.html

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by DumpTorrent: https://drive.google.com/open?id=1CgTs7rVhUD6jGOFqz582dLRmaPA4gJr7