Die Huawei H19-404_V1.0 Dumps von EchteFrage haben die sagenhafte Hit-Rate. Diese Dumps beinhalten alle mögliche Fragen in den aktuellen Prüfungen. Deshalb können Sie Huawei H19-404_V1.0 Prüfungen sehr leicht bestehen, wenn Sie diese Dumps ernst lernen. Als eine sehr wichtige Huawei H19-404_V1.0 Prüfung Zertifizierung spielt heute eine übergreifende Rolle. Deswegen können Sie die Chance nicht verlieren, die Prüfung zu bestehen. EchteFrage verspricht Ihnen volle Rückerstattung wenn durchgefallen. Informieren Sie bitte mehr an EchteFrage, wenn Sie die H19-404_V1.0 Zertifizierungsprüfung bestehen wollen.
| Section | Objectives |
|---|---|
| Topic 1: Campus Network Fundamentals | - Enterprise campus network architecture principles - Typical campus network deployment models |
| Topic 2: Switching and Routing in Campus Networks | - VLAN and segmentation design - Layer 2 and Layer 3 design principles |
| Topic 3: Presales Solution Design | - Solution proposal and design methodology - Customer requirement analysis |
| Topic 4: WLAN Planning and Design | - Wireless coverage planning - Capacity and performance design considerations |
| Topic 5: Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Topic 6: Network Security Design | - Campus security architecture considerations - Access control strategies |
Die meisten Leute wählen EchteFrage, denn es über große Bequemlichkeit und Anwendbarkeit verfügt. Die IT-Eliten von EchteFrage verfolgen ständig die Schulungsunterlagen von Huawei H19-404_V1.0 Zertifizierung aus ihren professionellen Prospektiven, was die Genauigkeit unserer Schulungsunterlagen zur Huawei H19-404_V1.0 Prüfung garantiert. Wenn Sie noch besorgt sind, können Sie einen Teil der Prüfungsfragen und Antworten downloaden, bevor Sie die Huawei H19-404_V1.0 Schulungsunterlagen von EchteFrage kaufen.
33. Frage
Which of the following is not part of an IFIT measurement model?
Antwort: D
Begründung:
The Network Management System is not an element of the IFIT measurement model. An IFIT measurement definition identifies the traffic to be measured, the locations where measurement actions occur, and the direction in which the flow is evaluated. The measurement flow specifies the target packets, usually through flow-identification fields. Measurement points define where packets are marked, counted, timestamped, or reported, such as ingress, transit, and egress nodes. Measurement direction distinguishes forward and reverse monitoring so that packet loss, delay, and path behavior can be analyzed correctly for each direction.
An NMS or controller remains operationally important because it creates measurement tasks, distributes configurations, receives telemetry data, correlates the results, and presents fault-location information.
However, it is the management and analysis system surrounding the measurement model, not one of the model's constituent measurement parameters.
Huawei positions IFIT as a high-precision telemetry mechanism used to delimit and locate application-quality faults. The training material highlights IFIT's capability to locate faults rapidly and detect packet loss with extremely high reliability. Therefore, the component that is not part of the measurement model is the NMS.
34. Frage
Which of the following can be determined through a survey of the terminal types on a customer's network?
Antwort: B
Begründung:
A terminal-type survey primarily determines the appropriate network admission control solution. Different terminal categories have different authentication capabilities and security requirements. Corporate laptops may support 802.1X authentication, guests may require Portal authentication, and printers, cameras, sensors, and other dumb terminals commonly require MAC-address authentication or automatic terminal identification.
Huawei recommends selecting authentication technologies according to the terminal type and usage scenario.
For example, access switches can serve as authentication points for wired dumb terminals, while APs or other access devices can perform authentication for wireless users. After terminal identification is enabled, iMaster NCE-Campus can automatically assign VLANs, ACLs, security groups, QoS parameters, and other authorization policies according to terminal category.
The survey therefore establishes which endpoints support interactive authentication, which require non- interactive admission, and which must receive special isolation or compliance policies. It does not independently determine the complete physical network architecture or the overall O & M platform.
Consequently, the terminal survey is used to formulate the network admission control solution, making option C correct.
35. Frage
Which of the following WLAN networking solutions is recommended when there are 15,000 wireless terminals on the customer network?
Antwort: D
Begründung:
A network serving 15,000 wireless terminals is a large-scale WLAN and should use a standalone WAC solution. A dedicated WAC provides independent controller resources, scalable AP and user management, centralized WLAN policy control, and the ability to deploy controller redundancy without tying wireless- control capacity directly to a specific core-switch service card.
Huawei recommends a standalone WAC when the wireless network scale is large or when the wireless network is deployed independently over an existing wired campus. The WAC is typically connected to the aggregation or core layer in off-path mode, and VRRP hot standby can be used to improve reliability.
Native WAC solutions are valuable for unified wired and wireless management, authentication, forwarding, and policy enforcement. However, for a very large number of wireless terminals, the controller platform must be selected according to user, AP, traffic, and forwarding-capacity specifications. A standalone WAC allows the wireless control plane to be sized and expanded independently.
Option C provides the dedicated WAC together with the required core and aggregation or access infrastructure. Therefore, it is the recommended architecture for 15,000 wireless terminals.
36. Frage
Which of the following statements is true about MACsec?
Antwort: B
Begründung:
Hardware-based encryption is the unambiguously correct statement. MACsec protects Ethernet frames at Layer 2 using AES-GCM-based authenticated encryption. On enterprise switches and routers, the encryption and integrity operations are commonly implemented in forwarding ASICs or dedicated hardware so that frames can be protected at high throughput with low latency.
Option A is incorrect because complex manual configuration is not an inherent requirement. MACsec can use manually configured connectivity-association keys, but IEEE 802.1X MACsec Key Agreement can automate peer authentication, secure-channel establishment, key distribution, and rekeying. The operational complexity therefore depends on the deployment model and management platform.
Option C is also inaccurate. MACsec is media-independent, meaning it can operate over supported copper or fiber Ethernet; however, it does not eliminate the requirement for appropriate Layer 2 connectivity between participating MACsec entities. Standard hop-by-hop MACsec protects Ethernet links or LAN connectivity between peers and is not a general Layer 3 tunneling mechanism.
MACsec supplies Layer 2 confidentiality, integrity, origin authentication, and replay protection. Its encryption can be performed directly in network-device hardware, enabling substantially better forwarding performance than software-only encryption implementations.
37. Frage
Which of the following models supports IPS, antivirus, and URL filtering at the same time?
Antwort: C
Begründung:
The AR5710-SE is the security-enhanced model that supports intrusion prevention, antivirus, and URL filtering concurrently. The "SE" variant is designed for branch scenarios requiring integrated routing and advanced security processing instead of only basic WAN connectivity and packet forwarding.
IPS examines network traffic for attack signatures and abnormal behavior and can block detected intrusions.
Antivirus inspection identifies malicious files or content using security-signature databases. URL filtering controls access to websites based on categories, reputation, or explicitly configured allowlists and blocklists.
Supporting all three functions simultaneously allows the AR5710-SE to operate as both an SD-WAN CPE and a secure branch egress gateway, reducing the requirement for an additional branch firewall.
Huawei's SD-WAN security architecture identifies firewall protection, antivirus, IPS, and URL filtering as its principal service-traffic security functions. Huawei also recommends advanced security functions such as URL filtering, IPS, and antivirus for branch scenarios requiring stronger Internet-egress protection. Among the listed models, the AR5710-SE provides the combined feature set. Therefore, option A is correct.
38. Frage
......
Wenn Sie unsere Lernmaterialien zur Huawei H19-404_V1.0 Zertifizierungsprüfung benutzen wollen, werden sicher die Zeit und Wirtschaftskosten reduziert. Vorm Kauf unserer Huawei H19-404_V1.0 Prüfungsfrage können Sie kostenlos unsere Fragen herunterladen. Sie sind in der Form von PDF und Software. Wenn Sie die Softwareversion brauchen, bitte setzen Sie sich inVerbindung mit unserem Kundenservice.
H19-404_V1.0 Simulationsfragen: https://www.echtefrage.top/H19-404_V1.0-deutsch-pruefungen.html