The AZ-802 exam questions are the ideal and recommended study material for quick and easiest Administering Windows Server (AZ-802) exam dumps preparation. The Administering Windows Server (AZ-802) practice questions are designed and verified by qualified and renowned Microsoft Certification Exams trainers. They work closely and check all Microsoft AZ-802 Exam Dumps step by step. They also ensure the best possible answer for all AZ-802 exam questions and strive hard to maintain the top standard of Administering Windows Server (AZ-802) exam dumps all the time.
| Section | Objectives |
|---|---|
| Networking and storage infrastructure | - Networking
|
| Disaster recovery and migration | - Backup and restore
|
| Monitoring and troubleshooting | - Diagnostics
|
| Implement and manage high availability | - Load balancing and redundancy
|
| Secure Windows Server hybrid infrastructures | - Security configuration
|
| Manage hybrid compute and virtualization | - Containers
|
At TopExamCollection, we are committed to providing candidates with the best possible AZ-802 practice material to help them succeed in the Administering Windows Server exam. With our real AZ-802 exam questions in AZ-802 PDF file, customers can be confident that they are getting the best possible Administering Windows Server preparation material for quick preparation. The Microsoft AZ-802 PDF Questions are portable and you can also take their print.
NEW QUESTION # 377
Your on-premises network is connected to Azure. You have an Azure subscription. The subscription contains a virtual machine named VM1 that runs Windows Server. You need to identify the latency between the on- premises network and VM1. Which Azure Network Watcher setting should you use?
Answer: C
Explanation:
Connection Monitor, the unified end-to-end monitoring capability inside Azure Network Watcher, is purpose- built to continuously measure and report latency, packet loss, and connectivity or topology issues between distributed endpoints, including an on-premises machine reached through an installed monitoring agent and an Azure virtual machine such as VM1, which directly matches the stated requirement to identify the latency between the on-premises network and VM1. IP flow verify only evaluates whether a specific network security group rule would allow or deny a particular packet based on its five-tuple, which has nothing to do with measuring latency. VPN troubleshoot is a diagnostic tool scoped specifically to the health of VPN gateway resources, such as gateway connection status and tunnel state, rather than to end-to-end latency between arbitrary endpoints. Connection troubleshoot performs a single point-in-time connectivity test that reports whether a connection currently succeeds or fails, along with basic round-trip time for that one test, but it does not provide the continuous, ongoing latency monitoring and historical trending that Connection Monitor provides, making Connection Monitor the correct setting for this ongoing latency-identification requirement.
NEW QUESTION # 378
You need to configure remote administration to meet the security requirements. What should you use?
Answer: A
Explanation:
The requirement states that server administrators must request approval before establishing a Remote Desktop connection to an Azure virtual machine, and that once approved, the connection must be established within a defined two-hour window. This request-approve-then-time-limited-access pattern for a specific management port on an Azure VM is precisely what just-in-time (JIT) VM access, a Microsoft Defender for Cloud capability, provides: it keeps the RDP/SSH management ports closed by default in the network security group, requires an explicit access request, and, once approved, opens the port only for a specified time window and only from the requester ' s source IP. Microsoft Entra Privileged Identity Management provides time-bound, approval-based elevation for Microsoft Entra and Azure RBAC roles, not for opening network ports to a VM, so it does not by itself control Remote Desktop network access. The Remote Desktop extension for Azure Cloud Services is a legacy classic-deployment feature unrelated to this scenario. Azure Bastion provides browser-based RDP/SSH without exposing public IPs but does not implement an approval workflow with a bounded connection window. JIT VM access is therefore the correct, purpose-built solution.
NEW QUESTION # 379
You plan to deploy an Azure virtual machine that will run Windows Server.
You need to ensure that an Azure Active Directory (Azure AD) user nameduserl@contoso.com can connect
10 the virtual machine by using the Azure Serial Console.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Answer:
Explanation:
Explanation:
Boot diagnostics with a custom storage account; assign User1 the Virtual Machine Contributor role.
Azure Serial Console requires boot diagnostics to be enabled on the target VM, and current Microsoft documentation specifies that Serial Console depends on a user-managed (custom) boot diagnostics storage account rather than the platform-managed default; a Microsoft-managed storage account does not satisfy this dependency, so " Boot diagnostics with a custom storage account " is the setting to configure on the VM.
Separately, to authorize a Microsoft Entra user to actually open and use the Serial Console for a given VM, Microsoft ' s documentation states the account needs the Virtual Machine Contributor role assigned on both the VM and the boot diagnostics storage account; this role grants the management-plane rights the Serial Console feature checks before allowing the connection, which is a broader ARM role than the RDP-focused Virtual Machine Administrator/User Login roles used for the AADLoginForWindows sign-in scenario. A system-assigned managed identity and operating-system guest diagnostics are unrelated settings that do not satisfy the Serial Console storage-account dependency. Note that Microsoft has signaled it intends to remove the boot-diagnostics storage-account dependency for Serial Console over time, so this configuration requirement should be re-checked against the Serial Console documentation if it is not working as expected in a given tenant.
NEW QUESTION # 380
You have a server named Server1 that runs Windows Server. The disks on Server1 are configured as shown in the following exhibit: Disk 0 (System Reserved + C: NTFS), Disk 1 (Data D: NTFS), Disk 2 (Data E:
exFAT). You need to convert volume E to ReFS. The solution must meet the following requirements: * Preserve the existing data on volume E. * Minimize administrative effort. What should you do first?
Disk Management showing Disk 0-2 and volume E as exFAT
Answer: D
Explanation:
Unlike the FAT-to-NTFS conversion path, which has an in-place, non-destructive conversion tool (convert.
exe) that preserves existing files, there is no equivalent in-place conversion utility for changing an existing volume ' s file system to ReFS: a volume must be reformatted as ReFS, which destroys all data currently on that volume. Because the requirement is explicitly to preserve the existing data on volume E while still ending up with an ReFS volume, the necessary first step is to back up the data currently on volume E to another location, so that after the volume is reformatted as ReFS, the data can be restored onto it. Taking Disk 2 offline is not needed to perform a backup and does not by itself help preserve data through a reformat.
Converting Disk 2 to a dynamic disk changes the disk ' s partitioning type but has no bearing on the volume ' s file system or on data preservation, and ReFS conversion does not require a dynamic disk. Running convert.
exe is specifically the FAT/FAT32-to-NTFS in-place conversion tool; it does not support converting a volume to ReFS at all, so it cannot be used here regardless of order. Therefore, backing up the data on volume E is the necessary first action, after which the volume can be reformatted as ReFS and the backed-up data restored.
NEW QUESTION # 381
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a failover cluster named Cluster1 that hosts an application named App1. The General tab in App1 Properties is shown in the General exhibit. (Click the General tab.) The Failover tab in App1 Properties is shown in the Failover exhibit. (Click the Failover tab.) Server2 shuts down unexpectedly. You need to ensure that when you start Server2, App1 continues to run on Server2. Solution: You pause the Server1 node in Cluster1 and then start Server1. Does this meet the goal?
Answer: B
Explanation:
The General tab for App1 shows that its Preferred Owners list has no nodes selected at all, and the Failover tab shows Allow failback set to Immediately, but the Allow failback setting only has any practical effect once a most-preferred owner node has actually been defined in the Preferred Owners list; with that list empty, the cluster has no designated target node to fail the role back to, regardless of how the failback timing is configured. After Server2 ' s unexpected shutdown, App1 is presumably now running on Server1, since Server1 is the surviving node in this two-node scenario. Pausing the Server1 node, which is the node currently running App1, and then simply starting Server1 again does nothing to move App1 back onto Server2 once Server2 is restarted, because pausing a node only prevents new roles from being placed onto it while it is paused; it does not trigger any existing role to move away from that node, nor does it configure any preferred- owner relationship that would drive App1 back to Server2. To actually meet the stated goal, Server2 would need to be explicitly configured as the preferred owner for App1 so that automatic failback has a defined target once Server2 comes back online, and that configuration change is not what this solution performs.
NEW QUESTION # 382
......
You may be busy in your jobs, learning or family lives and canโt get around to preparing and takes the certificate exams but on the other side you urgently need some useful AZ-802 certificates to improve your abilities in some areas. So is there a solution which can kill two birds with one stone to both make you get the certificate and spend little time and energy to prepare for the exam? If you choose the test Microsoft certification and then buy our AZ-802 prep material you will get the panacea to both get the useful certificate and spend little time. Passing the test certification can help you stand out in your colleagues and have a bright future in your career.
AZ-802 Practice Exam Online: https://www.topexamcollection.com/AZ-802-vce-collection.html