We provide three versions to let the clients choose the most suitable equipment on their hands to learn the H19-404_V1.0 exam guide such as the smart phones, the laptops and the tablet computers. We provide the professional staff to reply your problems about our H19-404_V1.0 study materials online in the whole day and the timely and periodical update to the clients. So you will definitely feel it is your fortune to buy our H19-404_V1.0 Exam Guide question. If you want to pass the H19-404_V1.0 exam, you should buy our H19-404_V1.0 exam questions.
| Section | Objectives |
|---|---|
| Topic 1: Campus Network Fundamentals | - Enterprise campus network architecture principles - Typical campus network deployment models |
| Topic 2: Huawei Campus Network Solutions | - iMaster NCE-Campus management platform - CloudCampus solution architecture |
| Topic 3: WLAN Planning and Design | - Capacity and performance design considerations - Wireless coverage planning |
| Topic 4: Presales Solution Design | - Customer requirement analysis - Solution proposal and design methodology |
| Topic 5: Switching and Routing in Campus Networks | - Layer 2 and Layer 3 design principles - VLAN and segmentation design |
| Topic 6: Network Security Design | - Access control strategies - Campus security architecture considerations |
>> New H19-404_V1.0 Braindumps Pdf <<
ITExamDownload offers you a full refund if you are not able to pass the H19-404_V1.0 certification exams after preparing with our products. The high quality of H19-404_V1.0 certification exam preparation products increases your success probability and reduces the chances of failure. The H19-404_V1.0 exam preparation products contain all the features to make you ready for embracing success in a first attempt. These H19-404_V1.0 Exam Preparation products are updated regularly for guaranteed success. Free demo is also offered to the users for checking the H19-404_V1.0 exam preparation products quality.
NEW QUESTION # 36
iMaster NCE-Campus can implement refined policy control over user permissions. Which of the following can be used as policy conditions?
Answer: A,B,C,D
Explanation:
All four options can be used as conditions by the iMaster NCE-Campus intelligent policy engine. Huawei describes this capability through a 5W1H-based policy model. "Who" represents the user identity, user group, or role. "Where" represents the access location, including the site, region, device group, device, SSID, or IP address. "How" represents the access mode, such as wired or wireless access and the authentication method used. "What" represents the terminal type or device attributes, including PCs and mobile operating systems.
The platform can combine these conditions rather than evaluating them independently. For example, a finance employee using a corporate laptop through wired 802.1X access at headquarters can receive different permissions from the same employee connecting through a personal mobile device at a branch. The authorization result can include a VLAN, ACL, security group, bandwidth limit, DSCP value, application policy, or URL-filtering rule.
This multidimensional evaluation enables context-aware, fine-grained access control. Therefore, A, B, C, and D are all correct.
NEW QUESTION # 37
Which of the following can be prevented by using the unauthorized access prevention function of Huawei switches?
Answer: A,B
Explanation:
Huawei switches' unauthorized access prevention function can prevent users from connecting unauthorized hubs and sharing network access through unauthorized Wi-Fi hotspots. An unauthorized hub allows multiple terminals to enter the network through a port intended for a single managed endpoint. This can bypass normal terminal-count limitations, admission controls, and access-policy enforcement.
Unauthorized Wi-Fi hotspot sharing occurs when a user connects an authenticated endpoint to the enterprise network and then enables hotspot or connection-sharing functionality. Other terminals can subsequently access the network through that endpoint without completing the required authentication process. Huawei switches can analyze terminal behavior, MAC-address relationships, packet characteristics, and access patterns to identify and restrict this behavior.
A USB flash drive is a local storage device and does not provide Ethernet network access, so option A is unrelated to switch-based unauthorized network access prevention. An unauthorized router is normally controlled through device identification, NAC, port security, or explicit access policies rather than the specific hub and hotspot-sharing prevention function described by this question.
Huawei intelligent terminal management combines terminal identification, authorization, traffic analysis, and bogus-terminal detection to achieve visualized access and prevent unauthorized connectivity.
NEW QUESTION # 38
What is the function of the PROFINET DCP?
Answer: B
Explanation:
PROFINET DCP, meaning Discovery and Basic Configuration Protocol, is used during device discovery and initial network configuration. It operates at the data-link layer and enables an engineering station or PROFINET IO controller to locate devices on the local Ethernet segment, identify them by MAC address or station name, assign a PROFINET device name, and configure IP parameters such as the IP address, subnet mask, and default gateway.
DCP is therefore not responsible for normal cyclic process-data exchange. Real-time PROFINET communication performs that function after the controller and I/O device have been configured and an application relationship has been established. Alarm exchange and acyclic parameterization are also handled through other PROFINET communication relationships and services.
The distinction matters during commissioning. A new I/O device may initially have no usable IP configuration. DCP allows the controller or engineering tool to discover it at Layer 2 and provision the identity and addressing information required before higher-layer communication can begin. PROFINET documentation identifies DCP as mandatory for assigning IP addresses and configuring station names on the local network.
NEW QUESTION # 39
Traffic can be forwarded directly between the two PRP ports of a PRP RedBox.
Answer: A
Explanation:
The statement is false. In Parallel Redundancy Protocol, LAN A and LAN B must remain two separate, failure-independent networks. A PRP RedBox connects a singly attached node or conventional network to both parallel LANs and behaves toward the PRP network like a doubly attached node. It duplicates outgoing frames and transmits one copy through each PRP port. For incoming traffic, it accepts the first valid copy and discards the later duplicate before forwarding the frame through its interlink port.
The RedBox must not operate as a normal bridge that directly forwards frames from its LAN A port to its LAN B port. Doing so would connect the two redundant LANs, potentially creating loops, duplicate propagation, broadcast amplification, and a common failure path. That would defeat the fundamental PRP requirement that failure or disruption in one LAN must not affect the other.
The original video contains the typing error "PPR RedBox"; the correct term is PRP RedBox , meaning Parallel Redundancy Protocol Redundancy Box. PRP topology requires two separate networks with no direct links between them, while the RedBox provides controlled redundant attachment for non-PRP devices.
NEW QUESTION # 40
Which experience-assurance technologies does Huawei SD-WAN provide?
Answer: A,B,C,D
Explanation:
Huawei SD-WAN provides all four technologies. Per-flow load balancing distributes separate application flows among multiple links that have the same priority and satisfy the required SLA. Per-packet load balancing can transmit packets from one flow across multiple eligible links, improving aggregate bandwidth utilization for large file transfers, backups, and replication.
Multi-fed and selective receiving duplicates critical traffic across different links. The receiving device selects valid packets, removes duplicates, and preserves packet order. Packet loss or failure on one path therefore does not interrupt the service, enabling zero-millisecond link switchover in applicable deployments.
A-FEC dynamically generates redundant packets and adjusts the redundancy ratio according to measured packet loss. The receiving device reconstructs lost packets, reducing video freezing and voice-quality deterioration. Huawei describes both adaptive FEC and multi-fed selective receiving as WAN-optimization mechanisms for key traffic.
Intelligent traffic steering selects links according to application identity, quality, bandwidth, priority, and load.
Therefore, A, B, C, and D are all correct.
NEW QUESTION # 41
......
Our company always put the quality of the H19-404_V1.0 practice materials on top priority. In the past ten years, we have made many efforts to perfect our H19-404_V1.0 study materials. Our H19-404_V1.0 study questions cannot tolerate any small mistake. All staff has made great dedication to developing the H19-404_V1.0 Exam simulation. Our professional experts are devoting themselves on the compiling and updating the exam materials and our services are ready to guide you 24/7 when you have any question.
H19-404_V1.0 Customized Lab Simulation: https://www.itexamdownload.com/H19-404_V1.0-valid-questions.html