최근인기시험FCP_FGT_AD-7.6최신인증시험자료대비자료

참고: Itexamdump에서 Google Drive로 공유하는 무료, 최신 FCP_FGT_AD-7.6 시험 문제집이 있습니다: https://drive.google.com/open?id=1-PNZ1Zv84s89aC2GhmmTRw3uAkC0m-hX

Fortinet FCP_FGT_AD-7.6 시험 기출문제를 애타게 찾고 계시나요? Itexamdump의 Fortinet FCP_FGT_AD-7.6덤프는Fortinet FCP_FGT_AD-7.6최신 시험의 기출문제뿐만아니라 정답도 표기되어 있고 저희 전문가들의 예상문제도 포함되어있어 한방에 응시자분들의 고민을 해결해드립니다. 구매후 시험문제가 변경되면 덤프도 시험문제변경에 따라 업데이트하여 무료로 제공해드립니다.

Fortinet FCP_FGT_AD-7.6 시험요강:

주제	소개
주제 1	VPN: This section of the exam measures the skills of network security engineers and covers the configuration and deployment of Virtual Private Network (VPN) solutions. Candidates are required to implement SSL VPNs to grant secure remote access to internal resources and configure IPsec VPNs in either meshed or partially redundant topologies to ensure encrypted communication between distributed network locations.
주제 2	Content inspection: This section of the exam measures the skills of network security engineers and covers the setup and management of content inspection features on FortiGate. Candidates must demonstrate an understanding of encrypted traffic inspection using digital certificates, identify and apply FortiGate inspection modes, and configure web filtering policies. The ability to implement application control for monitoring and regulating network application usage, configure antivirus profiles to detect and block malware, and set up Intrusion Prevention Systems (IPS) to shield the network from threats and vulnerabilities is also assessed.
주제 3	Firewall policies and authentication: This section of the exam measures the skills of firewall administrators and covers the implementation and management of security policies. It involves configuring basic and advanced firewall rules, applying Source NAT (SNAT) and Destination NAT (DNAT) options, and enforcing various firewall authentication methods. The section also includes deploying and configuring Fortinet Single Sign-On (FSSO) to streamline user access across the network.
주제 4	Routing: This section of the exam measures the skills of firewall administrators and covers the configuration of routing features on FortiGate devices. It includes defining and applying static routes for directing traffic within and outside the network, as well as setting up Software-Defined WAN (SD-WAN) to distribute and balance traffic loads across multiple WAN connections efficiently.
주제 5	Deployment and system configuration: This section of the exam measures the skills of network security engineers and covers essential tasks for setting up a FortiGate device in a production environment. Candidates are expected to perform the initial configuration, establish basic connectivity, and integrate the device within the Fortinet Security Fabric. They must also be able to configure a FortiGate Cluster Protocol (FGCP) high availability setup and troubleshoot resource and connectivity issues to ensure system readiness and network uptime.

>> FCP_FGT_AD-7.6최신 인증시험자료 <<

퍼펙트한 FCP_FGT_AD-7.6최신 인증시험자료 덤프 최신 데모

Fortinet인증 FCP_FGT_AD-7.6시험은 IT인증시험중 가장 인기있는 시험입니다. Fortinet인증 FCP_FGT_AD-7.6시험패스는 모든 IT인사들의 로망입니다. Itexamdump의 완벽한 Fortinet인증 FCP_FGT_AD-7.6덤프로 시험준비하여 고득점으로 자격증을 따보세요.

최신 Network Security FCP_FGT_AD-7.6 무료샘플문제 (Q10-Q15):

질문 # 10
Refer to the exhibit, which shows the IPS sensor configuration.

If traffic matches this IPS sensor, which two actions is the sensor expected to take? (Choose two.)

A. The sensor will reset all connections that match these signatures.
B. The sensor will gather a packet log for all matched traffic.
C. The sensor will block all attacks aimed at Windows servers.
D. The sensor will allow attackers matching the Microsoft.Windows.iSCSI.Target.DoS signature.

정답：C,D

설명：
The sensor will allow attackers matching the Microsoft.Windows.iSCSITarget.DoS signature.
The action for this specific signature is set to Monitor, which means FortiGate will only detect and log the activity but will not block or reset the session.
The sensor will block all attacks aimed at Windows servers.
The general Windows filter is configured with the Block action, so any traffic matching Windows- related attack signatures will be blocked.

질문 # 11
Refer to the exhibit. Which algorithm does SD-WAN use to distribute traffic that does not match any of the SD-WAN rules?

A. All traffic from a source IP is sent to the same interface
B. All traffic from a source IP to a destination IP is sent to the same interface.
C. Traffic is distributed based on the number of sessions through each interface.
D. Traffic is sent to the link with the lowest latency.

정답：B

설명：
For traffic that does not match any of the defined SD-WAN rules, the default implicit SD-WAN rule is applied. By default, the FortiGate uses a "source-destination IP-based" algorithm, which means all traffic from a specific source IP to a specific destination IP is sent through the same interface.
This ensures that a consistent path is used for traffic between the same source and destination IP addresses.

질문 # 12
An employee needs to connect to the office through a high-latency internet connection.
Which SSL VPN setting should the administrator adjust to prevent SSL VPN negotiation failure?

A. SSL VPN login-timeout
B. SSL VPN dtls-hello-timeout
C. SSL VPN session-ttl
D. SSL VPN idle-timeout

정답：A

설명：
When connected to SSL VPN over high latency connections, FortiGate can time out the client before the client can finish the negotiation process, such as DNS lookup and time to enter a token. Two new CLI commands under config vpn ssl settings have been added to address this.
The first command allows you to set up the login timeout, replacing the previous hard timeout value. The second command allows you to set up the maximum DTLS hello timeout for SSL VPN connections.

질문 # 13
Which inspection mode does FortiGate use for application profiles if it is configured as a profile- based next-generation firewall (NGFW)?

A. Flow-based inspection
B. Certificate inspection
C. Proxy-based inspection
D. Full content inspection

정답：A

설명：
You can configure application control in proxy-based and flow-based firewall policies. However, because application control uses the IPS engine, which uses flow-based inspection, the INSPECTION is always flow-based.

질문 # 14
Refer to the exhibit.

An administrator has created a new firewall address to use as the destination for a static route.
Why is the administrator not able to select the new address in the Destination field of the new static route?

A. In the new static route, the administrator must select Named Address.
B. In the new firewall address, the FQDN address must first beresolved.
C. In the new static route, the administrator must first set the interface to port2.
D. In the new firewall address, Routing configuration must be enabled.

정답：D

설명：
To use an FQDN-based address object as a destination in a static route, the "Routing configuration" option must be enabled in the firewall address settings. Without this, the address cannot be selected for routing.

질문 # 15
......

Itexamdump는 몇년간 최고급 덤프품질로 IT인증덤프제공사이트중에서 손꼽히는 자리에 오게 되었습니다. Fortinet FCP_FGT_AD-7.6 덤프는 많은 덤프들중에서 구매하는 분이 많은 인기덤프입니다. Fortinet FCP_FGT_AD-7.6시험준비중이신 분이시라면Fortinet FCP_FGT_AD-7.6한번 믿고 시험에 도전해보세요. 좋은 성적으로 시험패스하여 자격증 취득할것입니다.

FCP_FGT_AD-7.6최신버전 시험덤프문제: https://www.itexamdump.com/FCP_FGT_AD-7.6.html

참고: Itexamdump에서 Google Drive로 공유하는 무료, 최신 FCP_FGT_AD-7.6 시험 문제집이 있습니다: https://drive.google.com/open?id=1-PNZ1Zv84s89aC2GhmmTRw3uAkC0m-hX