It-Pruefung kann Ihnen nicht nur die ausgezeichnete Prüfungsunterlagen zur Fortinet NSEI_OTS_AR-7.6 Zertifizierung sondern auch guten Service bieten. Kaufen Sie It-Pruefung Dumps, bekommen Sie einjährige kostlose Aktualisierung von It-Pruefung. Damit können Sie immer die neuesten Fortinet NSEI_OTS_AR-7.6 Prüfungsfragen besitzen. Falls Sie dieFortinet NSEI_OTS_AR-7.6 Prüfung nicht ausgereicht hätten, gibt It-Pruefung Ihnen voll Geld zurück. Und dann machen Sie sich keine Sorge. Wir It-Pruefung sind sehr zuversichtlich für unsere Dumps. Glauben Sie bitten auch an uns. Verpassen Sie bitte nicht It-Pruefung zu Ihrem Erfolg. Wenn Sie das ignorieren, verlieren die Chance für einen einmaligen Erfolg.
| Section | Objectives |
|---|---|
| Asset Management | - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance - Use Fortinet Security Fabric for an OT network |
| Network Access Control | - Configure network access authentication - Explain OT Ethernet concepts - Configure network segmentation schemas |
| Network Security | - Configure security inspections for industrial protocols - Configure virtual patching - Configure automation |
| Monitoring and Risk Assessment | - Create FortiAnalyzer event handlers - Perform risk assessment and management - Analyze security reports from FortiAnalyzer |
Gott will, dass ich eine Person mit Fähigkeit, statt eine gute aussehende Puppe zu werden. Wenn ich IT-Branche wähle, habe ich dem Gott meine Fähigkeiten bewiesen. Aber der Gott ist mit nichts zufrieden. Er hat mich gezwungen, nach oben zu gehen. Die Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung ist eine große Herausforderung in meinem Leben. So habe ich sehr hart gelernt. Aber das macht doch nichts, weil ich It-Pruefung die Fragenkataloge zur Fortinet NSEI_OTS_AR-7.6 Zertifizierung gekauft habe. Mit ihr kann ich sicher die die Fortinet NSEI_OTS_AR-7.6 Prüfung bestehen. Der Weg ist unter unseren Füßen, nur Sie können ihre Richtung entscheiden. Mit den Prüfungsmaterialien zur Fortinet NSEI_OTS_AR-7.6 Prüfung von It-Pruefung können Sie sicher eine bessere Zukunft haben.
25. Frage
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Antwort: A,B
Begründung:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
26. Frage
Refer to the exhibit.
A simplified OT network is shown. You want to optimize the protection of this OT network. Which two controls must you implement? (Choose two answers)
Antwort: A,D
Begründung:
The correct answers are B. IPS on FortiGate_Level5 and C. Virtual patching on FortiGate_Level2 .
The study guide explains that "the first line of defense is securing the IT side of your network" and that FortiGate should be placed to protect ICS environments and stop threats from propagating from IT into OT. It also states that IPS improves OT security because "today's threat landscape requires IPS to block a wider range of threats and improve OT security" and that in IPS mode, vulnerable devices are protected . This makes FortiGate_Level5 , at the upper boundary near the DMZ and external connectivity, the correct place to implement IPS as a primary protection control.
The study guide also states in the Purdue model section that "Level 2 consists of the processes and programs that control the PLCs, RTUs, and IEDs found at Level 1" and that "it is necessary to segment, or even microsegment, these servers with firewall segmentation, along with policies that include application control and virtual patching." In addition, the virtual patching section says "Virtual patching protects OT devices that have not yet been updated against vulnerability exploits" and applies when traffic related to the vulnerable device reaches the firewall policy. Since FortiGate_Level2 sits between the process network and the control network, it is the right enforcement point for virtual patching to protect the PLC-side assets.
Option A is not one of the best answers because offline IDS only detects and logs attacks; the guide says "no traffic flows through FortiGate" in offline IDS mode, whereas IPS can actually block threats. Option D is also not the best answer because OT signatures are enabled within the IPS framework, but the stronger control explicitly described for this design is to deploy IPS at the upper boundary and virtual patching closer to vulnerable OT devices .
27. Frage
Refer to the exhibit.
The Core Network Security Connectors page of a FortiGate device is shown. You are configuring the Security Fabric in your OT network. One of the devices is not sending logs to FortiAnalyzer. When you check the status of the FortiGate device, it is Disabled as shown in the exhibit. Which two actions must you perform to enable this FortiGate device to send logs to FortiAnalyzer? (Choose two answers)
Antwort: B,C
Begründung:
Comprehensive and Detailed Explanation From Exact Extract of OT Security 7.6 Study guides:
The correct answers are A and C .
A is correct because the exhibit explicitly shows Logging & Analytics # FortiAnalyzer: Disabled on this FortiGate. The FortiGate must therefore have its FortiAnalyzer logging destination enabled and configured.
The study guide explains that the FortiAnalyzer Fabric connector consolidates traffic logs and, importantly, that "each FortiGate in the Security Fabric logs traffic to FortiAnalyzer independent of the root or other leaf devices." This means each FortiGate requires its own functioning logging connection to FortiAnalyzer; being a Security Fabric member alone does not cause its logs to pass through the root FortiGate.
C is correct because FortiAnalyzer must accept and authorize the FortiGate as a managed/logging device before the FortiGate can establish the normal logging relationship. This complements the FortiGate-side Logging & Analytics configuration. The study guide ' s Security Fabric logging architecture shows individual FortiGate devices maintaining FortiAnalyzer log connections , with FortiAnalyzer receiving and correlating their traffic and UTM logs. It specifically states that if the root FortiGate is unavailable, logging from leaf FortiGate devices to FortiAnalyzer continues to function , confirming that the FortiGate-to-FortiAnalyzer logging relationship is direct.
B is incorrect because configuring Fabric settings on FortiAnalyzer is not the missing step indicated by the exhibit. The problem shown is that FortiAnalyzer logging is Disabled on the FortiGate .
D is incorrect because authorization on the root FortiGate concerns joining and trusting a FortiGate as a Security Fabric member. It does not authorize that FortiGate as a logging device on FortiAnalyzer. The study guide explicitly distinguishes the architecture by stating that every FortiGate logs to FortiAnalyzer independently of the root .
28. Frage
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Antwort: B
Begründung:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
29. Frage
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Antwort: A
Begründung:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
30. Frage
......
Wenn Sie It-Pruefung wählen, würden wir mit äußerster Kraft Ihnen helfen, die Fortinet NSEI_OTS_AR-7.6 Prüfung zu bestehen. Außerdem bieten wir einen einjährigen kostenlosen Update-Service. Zögern Sie nicht, wählen Sie doch It-Pruefung. Er würde die beste Garantie für die Fortinet NSEI_OTS_AR-7.6 Zertifizierungsprüfung sein. Fügen Sie doch die Produkte von It-Pruefung in Ihren Einkaufwagen hinzu.
NSEI_OTS_AR-7.6 Deutsch Prüfungsfragen: https://www.it-pruefung.com/NSEI_OTS_AR-7.6.html