The 300-110 learning materials from our company are very convenient for all people, including the convenient buying process, the download way and the study process and so on. Upon completion of your payment on our 300-110 exam questions, you will receive the email from us in several minutes, and then you will have the right to use the 300-110 Test Guide from our company. In addition, there are three different versions for all people to choose: PDF, Soft and APP versions. According to your actual situation, you can choose the suitable version from our 300-110 study question.
| Section | Weight | Objectives |
|---|---|---|
| Topic 1: Wireless Infrastructure Design | 30% | - Wireless Controller architecture and deployment
|
| Topic 2: WLAN High Availability and Security Design | 20% | - Security architecture design
- High availability design
|
| Topic 3: Mobility Design | 25% | - Guest mobility and BYOD design - Mobility architecture models
|
| Topic 4: Wireless Site Survey | 25% | - Layer 1 site survey execution and analysis - Design requirements collection and constraint evaluation
- RF propagation and attenuation analysis |
>> Latest 300-110 Test Online <<
Evaluate your own mistakes each time you attempt the desktop Designing Cisco Wireless Networks (300-110) practice exam. It expertly is designed 300-110 practice test software supervised by a team of professionals. There is 24/7 customer service to help you in any situation. You can customize your desired 300-110 Exam conditions like exam length and the number of questions.
NEW QUESTION # 123
An engineer must assess an existing company WLAN to determine the possibility for future IEEE
802.11ac Wave 2 wireless deployment. All access switches are Fast Ethernet-capable only, and the wired infrastructure between existing APs and access switches is based on the CAT 6A standard. Which two actions provide maximum support of Cisco 3800 Series access points?
(Choose two.)
Answer: C,D
Explanation:
Cisco 3800 Series APs support IEEE 802.11ac Wave 2, which can deliver throughput exceeding
1 Gbps. Fast Ethernet switches are limited to 100 Mbps per port, creating a severe bottleneck.
The two actions that provide maximum support are replacing with mGig switches (Option A) and replacing with gigabit switches with 10G uplinks (Option B). mGig (Multi-Gigabit Ethernet) switches support 2.5G and 5G speeds over existing CAT 6A cabling, allowing the full throughput of 802.11ac Wave 2 APs to be utilized without replacing the existing cable plant. Gigabit switches with 10G uplinks ensure that the access layer can support 1 Gbps per AP port while providing sufficient uplink capacity.
NEW QUESTION # 124
An engineer is performing a Layer 1 passive wireless site survey utilizing a channel analyzer software in the
2.4 GHz spectrum. Which chart indicates the ratio of interference present during the duration of the capture?
Answer: B
Explanation:
In a Layer 1 passive wireless site survey using a channel analyzer tool (such as Metageek Chanalyzer or Cisco Spectrum Expert) in the 2.4 GHz spectrum, the chart that indicates the ratio of interference present during the capture duration is the Duty Cycle chart. The duty cycle chart displays the percentage of time that detected energy - including both Wi-Fi and non-Wi-Fi signals - is present on each channel. A high duty cycle on a channel indicates that the channel is occupied by transmissions for a significant portion of time, reducing available airtime for Wi-Fi clients. This chart directly communicates the ratio of interference because it shows what fraction of the observation period had detectable RF energy above the noise floor. Signal strength charts show amplitude (how strong), while duty cycle charts show temporal occupancy (how often) - the latter is the correct metric for quantifying interference ratio. Reference: WLSD Study Guide - Layer 1 Spectrum Analysis, Duty Cycle Chart Interpretation, Spectrum Analyzer Methodology.
NEW QUESTION # 125
Which CLI command does an engineer use to validate that the redundancy peer of a Stateful Switchover pair of controllers is up and connected?
Answer: C
Explanation:
The eping command is used on Cisco Wireless LAN Controllers to verify that the redundancy peer in a Stateful Switchover (SSO) pair of controllers is up and connected. This command sends ECHO packets (EoIP echo packets) to the peer controller to ensure the data path connectivity is functioning. In an SSO configuration, eping verifies the EoIP tunnel between the active and standby controllers, which is critical for state synchronization and seamless failover. If eping succeeds, it confirms that both the network path and the EoIP data encapsulation between the controllers are functional.
NEW QUESTION # 126
Users who leave the office with a wireless headset must be able to hand oft the voice call with minimal disruption. The engineer drafted four possible Door plans for AP placement:
- red dots and arrows represent the direction of travel
- blue dots represent the AP placements
Which floor plan provides the requested functionality?
Answer: B
Explanation:
VoWLAN handoff quality is fundamentally determined by the AP placement strategy relative to the direction of user movement. When a user is in motion carrying an active voice call, the roaming event must occur before signal quality degrades below the minimum acceptable VoWLAN threshold (typically -67 dBm for voice, with a minimum SNR of 25 dB). This requires the user to encounter increasing signal strength from a neighboring AP before the current AP's signal drops below the threshold. The optimal AP placement follows the principle of overlapping coverage along the predicted path of travel -- APs must be positioned so that as a user moves, they progressively enter the coverage zone of the next AP while still within adequate range of the current one. Floor plan B represents the correct design where APs are positioned along the travel path with sufficient cell overlap (typically 15-20%) to ensure seamless 802.11r fast BSS transitions. Incorrect floor plans place APs perpendicular to travel direction, at path endpoints only, or with insufficient overlap zones -- all of which create roaming dead zones where the handoff occurs too late, causing voice call disruption.
NEW QUESTION # 127
A customer has a Cisco wireless network with two Cisco Catalyst 9800 Series WLCs in a high availability cluster, 50 Cisco 2800I APs, and all SSIDs and services are 5 GHz only. A security mandate requires that rogue APs be scanned and identified in 2.4 GHz and 5 GHz bands without impacting existing client connectivity. How must the wireless network be reconfigured to meet the requirement without purchasing additional APs?
Answer: B
Explanation:
The Cisco Aironet 2800 Series APs feature a dual-radio architecture with a dedicated 5 GHz radio (slot 1) and a Flexible Radio Assignment (XOR) radio (slot 0) that can operate in either 2.4 GHz or 5 GHz, or be assigned to monitor mode for scanning functions. Since all existing SSIDs and services are 5 GHz only, the slot 1 (dedicated 5 GHz) radio is responsible for all current client connectivity -- it must remain in Client Serving mode to maintain uninterrupted 5 GHz WLAN service. The XOR radio (slot 0), currently either idle or operating as a secondary 5 GHz radio, can be repurposed without impacting client service. Setting the XOR radio to Monitor mode enables it to continuously scan all channels across both the 2.4 GHz and 5 GHz spectrum for rogue AP detection, using the embedded CleanAir and WIDS capabilities. In Monitor mode, the XOR radio operates full-time as a dedicated scanner, providing rogue detection coverage on 2.4 GHz (previously uncovered since all services were 5 GHz) and supplementary scanning on 5 GHz.
This eliminates the need for additional dedicated monitor mode APs.
NEW QUESTION # 128
......
Success in the Cisco 300-110 exam is impossible without proper 300-110 exam preparation. I would recommend you select PassLeaderVCE for your 300-110 certification test preparation. PassLeaderVCE offers updated Cisco 300-110 PDF Questions and practice tests. This 300-110 practice test material is a great help to you to prepare better for the final Cisco 300-110 exam. PassLeaderVCE lates 300-110 exam dumps are one of the most effective Cisco 300-110 Exam Preparation methods. These valid Cisco 300-110 exam dumps help you achieve better 300-110 exam results. World's highly qualified professionals provide their best knowledge to PassLeaderVCE and create this Cisco 300-110 practice test material. Candidates can save time because 300-110 valid dumps help them to prepare better for the Cisco 300-110 test in a short time.
300-110 Discount Code: https://www.passleadervce.com/CCNP-Wireless/reliable-300-110-exam-learning-guide.html