BTW, DOWNLOAD part of BraindumpsIT VNX301 dumps from Cloud Storage: https://drive.google.com/open?id=1WmrVWKfetD1MfN9v5mSjBsvmWaw3zw8I
Just like the old saying goes, motivation is what gets you started, and habit is what keeps you going. A good habit, especially a good study habit, will have an inestimable effect in help you gain the success. The VNX301 exam prep from our company will offer the help for you to develop your good study habits. If you buy and use our study materials, you will cultivate a good habit in study. More importantly, the good habits will help you find the scientific prop learning methods and promote you study efficiency, and then it will be conducive to helping you pass the VNX301 Exam in a short time. So hurry to buy the VNX301 test guide from our company, you will benefit a lot from it.
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
For successful preparation, you can also rely on Understanding Versa Certified SD-WAN Specialist (VNX300) VNX301 real questions. Visit For More Information: Three Formats of Versa Networks VNX301 Updated Practice Material. The Versa Networks VNX301 practice test is available in three compatible and user-friendly formats. These formats are VNX301 desktop practice test software, Versa Networks VNX301 web-based practice exam, and Versa Networks VNX301 PDF dumps file. All three formats of Versa Networks VNX301 study material contain actual and verified Understanding Versa Certified SD-WAN Specialist (VNX300) VNX301 exam dumps that will help you boost your exam preparation.
NEW QUESTION # 33
Examine the exhibit below.
You are onboarding the SOLDEU-R2 branch device using the staging script. You cannot get a Versa- Provider-Controller-VR IP address assigned, indicating that the IPsec tunnel to the corrector has not come up.
You verified that the cables have been connected to the correct ports.
What has caused this issue?
Answer: A
Explanation:
The issue is caused by specifying the incorrect WAN port in the staging script. In the exhibit, the SOLDEU- R2 branch is physically connected to the Internet cloud through vni-0/0 , while vni-0/1 is shown as the inter- device link toward SOLDEU-R1. However, the show interfaces brief output shows that the WAN IP address
192.168.122.121/24 has been assigned to vni-0/1.0 , not to the Internet-facing interface. Since the cables are confirmed to be connected correctly, the mismatch must be in the staging script interface selection, not in the cabling.
Versa documentation states that during SD-WAN staging, the branch establishes an IKE session with the Controller, and after that the Controller assigns an IP address to the branch device. Versa troubleshooting guidance also states that after transport connectivity to the Controller is established, the branch forms IKE-based IPsec connectivity, and if this succeeds, the ptvi interface toward the Controller comes up. If IKE/IPsec fails, the ptvi interface remains down. Because the staged WAN IP is placed on the wrong VNI interface, the branch cannot reach the Controller over the intended Internet transport, so the Controller tunnel does not come up.
NEW QUESTION # 34
You configured Direct Internet Access on your Versa branches using the workflow template. Which statement is true in this scenario?
Answer: B
Explanation:
The correct answer is C . In Versa Secure SD-WAN, Direct Internet Access, or DIA, provides local internet breakout from the branch rather than backhauling internet-bound traffic through a hub. Versa design documentation explains that the DIA architecture creates an internal connection between the tenant VRF and the WAN transport VR and uses CGNAT to translate internet-bound LAN traffic to the public IP address associated with the WAN transport interface. It specifically states that the main DIA components include the CGNAT function for translating internet-bound traffic and that DIA is configured using Director Workflows when configuring tunnels.
When the workflow template is used and the DIA option is selected for the internet breakout tunnel, Director automatically builds the required DIA infrastructure, including the NAPT/CGNAT configuration associated with the internet-facing transport network. This is why manual creation of the CGNAT pool and rule is not required in the workflow-based method. Option A describes a manual configuration approach, not the workflow-generated behavior. Option B is incorrect because NAT must be associated with the internet-facing breakout path, not simply the LAN interface. Option D is incorrect because DIA normally requires address translation for LAN users accessing the public internet.
NEW QUESTION # 35
A business-critical application should remain on the best SLA-compliant circuit. When all SLA-compliant circuits fail, the traffic must be dropped instead of being forwarded on a degraded path. Which forwarding- profile setting should be changed?
Answer: C
Explanation:
The correct answer is A . In Versa SD-WAN traffic steering, forwarding profiles define how traffic is mapped to WAN circuits, how next hops are selected, and how traffic behaves when SLA conditions are violated. If the requirement is to stop traffic when no SLA-compliant path is available, the relevant behavior is the SLA Violation Action . Setting this option to Drop prevents the VOS device from forwarding the matching traffic over a circuit that does not satisfy the policy's SLA requirements.
This is the opposite of using Forward , which allows traffic to continue even when the available next hops violate the SLA. Forward may be appropriate for best-effort applications where degraded delivery is better than no delivery, but it is not appropriate for strict business-critical applications that must not use a degraded path.
Nexthop Failure Action controls how the system behaves when a next hop fails, such as waiting for recovery or re-evaluating. Header compression affects packet overhead, and the recompute timer controls periodic recalculation timing. None of those settings directly enforce "drop when SLA is not met."
NEW QUESTION # 36
You have deployed a group of devices in Versa Director, and the field technicians have performed the onboarding tasks onsite. One of the devices has not finished the onboarding process and does not appear in the Appliances list in Versa Director. The onboarding VPN tunnel from the device to the Controller is up.
Which two actions would help you solve this problem? (Choose two.)
Answer: B,D
Explanation:
The correct answers are A and C . If the onboarding VPN tunnel from the branch device to the Controller is up, the branch has reached at least the initial staging/control connectivity stage. Versa troubleshooting documentation explains that after a branch establishes IPsec connectivity to the Controller, the Controller sends a branch-connect notification to Versa Director. In response, Director pushes staging configuration and continues the onboarding lifecycle. If the expected later notification is not seen, the branch has not completed staging and further onboarding/debug steps are required.
The Tasks list in Versa Director is useful because device deployment and onboarding actions are executed as Director tasks. If template commit, workflow deployment, device claiming, or configuration push fails, the task output can show the error. The Unknown Devices dashboard is also relevant because a device that reaches the Controller but cannot be matched or fully associated with an expected workflow/appliance record may appear as an unknown device awaiting administrative review. The Monitor dashboard is not the best choice because the device is missing from the Appliances list and has not completed onboarding. Resource Pool is related to connector resources, not branch onboarding completion.
NEW QUESTION # 37
What are two features of the Stateful Firewall service in the Versa Operating System? (Choose two.)
Answer: A,B
Explanation:
The correct answers are A and D . Versa stateful firewall service includes classic firewall functions that track sessions and enforce traffic policy, and it can work with DoS policy enforcement. Versa's CLI guide includes Configuring DoS policies under the security configuration area, where DoS rules can match on source, destination, services, applications, URL category, IP version, DSCP, TTL, EtherType, and other packet or session attributes, and can then apply aggregate or classified DoS profiles. This validates DoS protection as a stateful firewall/security service capability.
Application-Level Gateways, or ALGs , are also associated with stateful firewall/NAT behavior because they inspect and assist protocol handling for applications that embed addressing or dynamic port information inside the payload or control channel. This is part of traditional stateful firewall service behavior rather than UTM content inspection.
NEW QUESTION # 38
......
The Versa Networks VNX301 certification exam offers a great opportunity to advance your career. With the Versa Certified SD-WAN Specialist (VNX300) certification exam beginners and experienced professionals can demonstrate their expertise and knowledge. After passing the Versa Certified SD-WAN Specialist (VNX300) (VNX301) exam you can stand out in a crowded job market. The Versa Certified SD-WAN Specialist (VNX300) (VNX301) certification exam shows that you have taken the time and effort to learn the necessary skills and have met the standards in the market.
VNX301 Test Vce: https://www.braindumpsit.com/VNX301_real-exam.html
P.S. Free & New VNX301 dumps are available on Google Drive shared by BraindumpsIT: https://drive.google.com/open?id=1WmrVWKfetD1MfN9v5mSjBsvmWaw3zw8I