Wir Pass4Test sind eine professionelle Website. Wir bieten jedem Teilnehmer guten Service, sowie Vor-Sales-Service und Nach-Sales-Service. Wenn Sie International Code Council 93-Tall-Mass-Timber-Buildings Zertifizierungsunterlagen von Pass4Test wollen, können Sie zuerst das kostlose Demo benutzen. Sie können sich fühlen, ob die Unterlagen sehr geeignet sind. Damit können Sie die Qualität unserer International Code Council 93-Tall-Mass-Timber-Buildings Prüfungsunterlagen überprüfen und dann sich entscheiden für den Kauf. Falls Sie dabei durchgefallen wären, geben wir Ihnen voll Geld zurück. Oder Sie können wieder einjährige kostlose Aktualisierung auswählen.
| Section | Objectives |
|---|---|
| Tall Mass Timber Building Code Provisions | - Type IV Construction
|
>> 93-Tall-Mass-Timber-Buildings Deutsche Prüfungsfragen <<
Um Sie beim Kauf der International Code Council 93-Tall-Mass-Timber-Buildings Prüfungssoftware beruhigt zu lassen, wenden wir die gesicherteste Zahlungsmittel an. Paypal ist das größte internationale Zahlungssystem. Und wir bewahren sorgfältig Ihre persönliche Informationen. Wenn Sie Fragen über die International Code Council 93-Tall-Mass-Timber-Buildings Prüfungsunterlagen oder Interesse an anderen Prüfungssoftwaren haben, könnten Sie diret mit uns online kontaktieren oder uns E-Mail schicken. Wir tun unser Bestes, um Ihnen bei der International Code Council 93-Tall-Mass-Timber-Buildings Prüfung zu helfen.
47. Frage
Given: Sealants or adhesives need not be provided where they are not a required component of a tested fire resistance rated assembly.
If a sealant is required, it must meet the requirement of ASTM:
Antwort: B
Begründung:
A sealant required to resist air passage between qualifying mass timber elements must comply with ASTM C920. Therefore, option C is correct. ASTM C920 is the recognized specification for elastomeric joint sealants and establishes requirements for properties such as movement capability, adhesion, cohesion, hardness, weathering, and durability.
IBC Section 703.7 differentiates between the two materials: sealants must meet ASTM C920, while adhesives must meet ASTM D3498. Option D therefore applies to an adhesive rather than a sealant. ASTM E119 is the standard fire test used to establish the fire-resistance rating of structural members and assemblies; it does not serve as the product specification for the sealant. ASTM E114 is not the applicable standard under this provision.
The stated exception is important. Section 703.7 does not require an additional sealant or adhesive where it is not a required component of the tested fire-resistance-rated assembly. Where the approved assembly or code provision does require it, however, the specified product, location, joint preparation, backing material, depth, width, and tooling must match the approved construction documents.
References/Topics: 2021 IBC Section 703.7; ASTM C920 sealants; ASTM D3498 adhesives; tested fire- resistance-rated assemblies.
48. Frage
Periodic special inspection of sealants or adhesives shall be conducted where sealants or adhesives are part of a mass timber building element as designated in the approved construction documents.
All of the following statements are correct in reference to sealants or adhesives in mass timber buildings except:
Antwort: C
Begründung:
Option C is the incorrect statement. The sealing inspection requirements in IBC Section 1705.20 do not automatically apply to every item classified as a "joint" under Section 202. They apply specifically where a sealant or adhesive required by Section 703.7 is installed on mass timber building elements identified in the approved construction documents.
Section 703.7 addresses abutting edges and intersections of fire-resistance-rated mass timber elements and intersections between mass timber and other materials where both elements require a fire-resistance rating.
These conditions require periodic special inspection because continuity of the air seal affects the fire performance assumed for the timber assembly.
Option A is correct: qualifying sealants must comply with ASTM C920. Option B is also correct: adhesives used for this purpose must comply with ASTM D3498. Option D reflects the required inspection of sealant applications at the prescribed abutting edges and intersections, although the technically precise term is "mass timber building elements." Fire-resistant joint systems are governed separately by IBC Section 715 and may require inspection under Section 1705.18. The two inspection categories must not be treated as interchangeable.
References/Topics: 2021 IBC Sections 703.7, 715, 1705.18 and 1705.20; ASTM C920; ASTM D3498.
49. Frage
In Type IV-C construction, a connection between two members of the primary structural frame supporting a floor is required to be protected to achieve a minimum fire-resistance rating of:
Antwort: D
Begründung:
The required minimum rating is two hours. Under 2021 IBC Table 601, the primary structural frame in Type IV-C construction must provide a two-hour fire-resistance rating. A structural connection joining members of that frame cannot be permitted to fail before the members it connects; consequently, the connection must remain functional for the same required period.
The protection requirement applies to the complete connection assembly. This includes steel plates, hangers, bolts, screws, dowels, fasteners, welds, bearing regions, and portions of the connected timber that form part of the connection. Compliance can be achieved through tested construction, calculated wood cover, Type X gypsum protection, another approved noncombustible system, or a combination documented by the registered design professional.
Option A is insufficient because it would leave a one-hour weakness in a two-hour structural load path.
Option B similarly falls short of the required Table 601 rating. Option D is the Type IV-A primary-frame rating and is not required for the stated Type IV-C condition.
The special inspector must verify protective-cover dimensions and installation before connection hardware becomes concealed, including any project-specific inspection required for calculated wood-cover protection.
References/Topics: 2021 IBC Table 601 and Section 2304.10.1; AWC Fire Design Specification, protection of structural connections.
50. Frage
Refer to the figure by clicking on the EXHIBIT button above.
The exterior wall section shown in the Figure provides the prescribed noncombustible protection required by which Construction Type?
Antwort: D
Begründung:
The illustrated wall corresponds to Type IV-A construction , making option A correct. The key indicator is the extensive Type X gypsum protection provided on the interior face of the CLT wall. Figure 63 shows multiple layers of 5/8-inch Type X gypsum board protecting the interior mass timber, together with the required exterior-side protection.
Type IV-A is the most comprehensively protected of the three tall mass timber construction classifications.
IBC Section 602.4.1.2 requires the interior faces of all mass timber elements , including the inside face of exterior mass timber walls, to be protected with qualifying noncombustible material. Section 602.4.1.2.1 requires the protection contribution to satisfy Table 722.7.1(1) and never be less than 80 minutes. Type IV-A exterior walls also require at least 40 minutes of noncombustible protection on the outside face.
The three interior layers shown are consistent with a heavily protected Type IV-A rated wall. By contrast, Type IV-B permits limited exposed interior mass timber, while Type IV-C expressly permits mass timber interior elements to remain unprotected. Type IV-HT operates under fundamentally different heavy-timber provisions.
References/Topics: 2021 IBC Sections 602.4.1.1, 602.4.1.2 and 602.4.1.2.1; Tables 601 and 722.7.1(1)-(2).
51. Frage
All of the following combustible elements may be used in mass timber buildings except:
Antwort: D
52. Frage
......
Wie viel wissen Sie über Pass4Test? Haben Sie Prüfungsfragen und Antworten zur International Code Council 93-Tall-Mass-Timber-Buildings IT-Zertifizierung von Pass4Test benutzt? Oder Haben Sie von anderen die Pass4Test Prüfungsunterlagen gehört? Als der professionelle Lieferant der IT-Zertifizierungsprüfungen, ist Pass4Test unbedingt die beste Website, die Sie nie gesehen haben. Warum sind wir so zuversichtlich? Weil es keine andere Website wie wir Pass4Test gibt， die die besten 93-Tall-Mass-Timber-Buildings Unterlagen und den besten Service anbieten.
93-Tall-Mass-Timber-Buildings Quizfragen Und Antworten: https://www.pass4test.de/93-Tall-Mass-Timber-Buildings.html