Reliable JN0-364 Test Tutorial | Valid JN0-364 Exam Notes

P.S. Free 2026 Juniper JN0-364 dumps are available on Google Drive shared by GuideTorrent: https://drive.google.com/open?id=1kCC3UaB1FC5-LAclk-8ZAjiJObNNz08s

The Service Provider Routing and Switching, Specialist (JNCIS-SP) (JN0-364) PDF dumps format can be accessed from any smart device such as laptops, tablets, and smartphones. GuideTorrent regularly updates the JN0-364 PDF Questions to reflect the latest Juniper JN0-364 exam content. All test questions in the JN0-364 exam PDF format are real and latest.

Juniper JN0-364 Exam Syllabus Topics:

SectionWeightObjectives
Topic 1: Open Shortest Path First (OSPF)15-20%- Link-state database
- LSA types and operation
- Areas and router types
- Configuration and troubleshooting
Topic 2: Border Gateway Protocol (BGP)20-25%- IBGP and EBGP
- Path selection and attributes
- Configuration and troubleshooting
- Basic operation and message types
- Policy and route filtering
Topic 3: Intermediate System to Intermediate System (IS-IS)10-15%- Configuration and monitoring
- Adjacencies and levels
- Metrics and wide metrics
- PDUs and TLVs
Topic 4: Spanning Tree Protocols8-12%- STP, RSTP, MSTP, VSTP
- Configuration and convergence
- Port roles and states
- BPDU and protection features
Topic 5: Layer 2 Bridging and VLANs8-12%- VLANs and trunking
- Service provider switching features
- Bridging concepts
Topic 6: Protocol-Independent Routing10-15%- Load balancing
- Static, aggregate, and generated routes
- Routing instances and RIB groups
- Filter-based forwarding
- Martian addresses
Topic 7: IPv68-12%- Address types and format
- Static and dynamic routing
- Autoconfiguration
- OSPFv3 and BGP for IPv6
Topic 8: High Availability5-8%- Graceful restart
- NSR and GRES concepts
- Nonstop active routing
Topic 9: Tunnels5-8%- GRE and IP-IP tunnels
- Tunnel configuration and usage
Topic 10: Multiprotocol Label Switching (MPLS)12-18%- Labels and LIB
- Configuration and monitoring
- Segment routing basics
- LDP and RSVP
- Terminology and forwarding

>> Reliable JN0-364 Test Tutorial <<

JN0-364 Actual Torrent - JN0-364 Pass-King Materials & JN0-364 Actual Exam

If you are troubled with JN0-364 exam, you can consider down our free demo. You will find that our latest JN0-364 exam torrent are perfect paragon in this industry full of elucidating content for exam candidates of various degree to use. Our results of latest JN0-364 exam torrent are startlingly amazing, which is more than 98 percent of exam candidates achieved their goal successfully. The latest JN0-364 Exam Torrent covers all the qualification exam simulation questions in recent years, including the corresponding matching materials at the same time.

Juniper Service Provider Routing and Switching, Specialist (JNCIS-SP) Sample Questions (Q124-Q129):

NEW QUESTION # 124
What is the default route preference for an aggregate route?

Answer: A

Explanation:
In Junos OS, aggregate routes have a default route preference of 130. This preference determines how the route is compared with routes learned from other routing protocols when selecting the active route in the routing table.


NEW QUESTION # 125
Referring to the exhibit. Which two statements are correct about the information shown in the exhibit? (Choose two.)

Answer: A,D

Explanation:
The exhibit shows the output of the command show spanning-tree bridge, which provides information about the spanning tree status of the switch. From the output, we can see that the switch has a bridge ID different from the root ID, which implies that this switch is not the root bridge. The "Topology change initiator" field shows ge-0/0/14, which indicates that the last topology change occurred on this interface, and this is also the interface used to reach the root bridge.


NEW QUESTION # 126
What happens if an IS-IS router receives a link-state PDU with a higher sequence number than the one in its database?

Answer: A

Explanation:
IS-IS is a link-state protocol that relies on the rapid and consistent flooding ofLink-State PDUs (LSPs)to ensure that every router in an area has an identical view of the topology. To manage the "freshness" of information, IS-IS uses aSequence Number-a 32-bit unsigned integer that increments every time the originating router makes a change to its LSP.
According to Juniper Networks technical documentation, when a router receives an LSP, it performs a comparison between the received LSP and the version it currently holds in itsLink-State Database (LSDB).
If the received LSP has ahigher sequence number, the router concludes that this is "newer" and more accurate information. The router will then perform two immediate actions:
* Update:It replaces the older LSP in its LSDB with the newly received version.
* Flood:It propagates the new LSP to all other neighbors (except the one that sent it) to ensure the entire area converges on the new data.
If the sequence numbers were equal, the router would ignore the incoming PDU as it already has the information. If the received sequence number werelower, the router would conclude its own database is more recent and would actually send its own "newer" version back to the neighbor to bring them up to date (a process called "poisoning" or refreshing the neighbor).Complete Sequence Number PDUs (CSNPs)(Option C) are used during initial database synchronization or periodic checks on broadcast links, but the primary response to a "newer" LSP is immediate database update and flooding.


NEW QUESTION # 127
Which two steps are required to enable MPLS on a physical interface in Junos? (Choose two.)

Answer: A,D

Explanation:
To enable MPLS on a physical interface in Junos, the family mpls statement must be added to the interface configuration. Additionally, the interface itself must be specified under the protocols mpls section of the configuration.


NEW QUESTION # 128
You are using EBGP to connect to two upstream peers in the same AS. You want to make one of the links less preferred for traffic entering your network from the peer's AS.
Which feature should you use to achieve this goal?

Answer: D

Explanation:
AS-path prepending artificially lengthens the AS-path attribute by adding additional instances of the local AS number when advertising routes to a specific external peer. Because BGP prefers routes with shorter AS paths, the upstream AS will consider the prepended path less attractive and will prefer the other link when sending traffic toward the network.


NEW QUESTION # 129
......

All contents of JN0-364 training prep are made by elites in this area rather than being fudged by laymen. Let along the reasonable prices of our JN0-364 exam materials which attracted tens of thousands of exam candidates mesmerized by their efficiency by proficient helpers of our company. Any difficult posers will be solved by our JN0-364 Quiz guide. And we have free demos of our JN0-364 study braindumps for you to try before purchase.

Valid JN0-364 Exam Notes: https://www.guidetorrent.com/JN0-364-pdf-free-download.html

BTW, DOWNLOAD part of GuideTorrent JN0-364 dumps from Cloud Storage: https://drive.google.com/open?id=1kCC3UaB1FC5-LAclk-8ZAjiJObNNz08s