2026 Latest Pass4suresVCE NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1V6702GZ2MPBxInyVQgee1hPwM4AEpY91
In order to let you have a general idea about our NSEI_OTS_AR-7.6 test engine, we have prepared the free demo in our website. The contents in our free demo are part of the NSEI_OTS_AR-7.6 real materials in our study engine. We are confident enough to give our customers a chance to test our NSEI_OTS_AR-7.6 Preparation materials for free before making their decision. You are really welcomed to download the free demo in our website to have the firsthand experience, and then you will find out the unique charm of our NSEI_OTS_AR-7.6 actual exam by yourself.
| Section | Objectives |
|---|---|
| Asset Management | - Use Fortinet Security Fabric for an OT network - Implement device detection on FortiGate and FortiNAC - Explain OT standards and Fortinet compliance |
| Monitoring and Risk Assessment | - Create FortiAnalyzer event handlers - Analyze security reports from FortiAnalyzer - Perform risk assessment and management |
| Network Security | - Configure virtual patching - Configure automation - Configure security inspections for industrial protocols |
| Network Access Control | - Configure network access authentication - Explain OT Ethernet concepts - Configure network segmentation schemas |
>> NSEI_OTS_AR-7.6 Exam Questions Vce <<
Our experts update the NSEI_OTS_AR-7.6 training materials every day and provide the latest update timely to you. If you have the doubts or the questions about our product and the purchase procedures you can contact our online customer service personnel at any time. We provide the discounts to the old client and you can have a free download and tryout of our NSEI_OTS_AR-7.6 Test Question before your purchase. So there are many merits of our product. Read the introduction of the characteristics and the functions of our NSEI_OTS_AR-7.6 practice test as follow carefully before you purchase our product.
NEW QUESTION # 27
Refer to the exhibit.
A partial OT network is shown. You have encountered many disconnections in the links and want to improve the availability of this network. Which action can you perform? (Choose one answer)
Answer: B
Explanation:
The correct answer is C. You can implement parallel redundancy protocol . The study guide explains that media redundancy involves creating a backup path that can be used when part of the network fails and specifically states that "Parallel Redundancy Protocol (PRP) can be used for a star topology." Since the problem described is many disconnections in the links , the issue is link availability, which is a media redundancy problem rather than a firewall virtualization or policy separation problem. PRP is designed to provide a backup communication path with low recovery time when links fail.
The other options do not fit this scenario as well. HA clusters are described in the guide as a solution for network node redundancy , where a backup firewall or switch takes over when the primary device fails. SD- WAN is recommended for remote site access across multiple WAN links, not for the local floor links shown in this topology. VDOMs provide logical segmentation, not link redundancy or higher link availability.
Because the question is specifically about repeated link disconnections , the best action is to implement PRP .
NEW QUESTION # 28
Refer to the exhibit.
A partial Application Sensor profile is shown. When you apply this profile in firewall policy, which two statements are correct? (Choose two answers)
Answer: A,C
Explanation:
The correct answers are A and C . The study guide explains that "You can use application control signatures to detect OT protocols" and that application control provides "granular message type identification." In the exhibit, the Operational Technology application category is included in the Application Sensor profile, so OT application signatures are enabled in this profile.
Option C is also correct because the override table shows Modbus_Read.Holding.Registers = Allow and Modbus = Block . The study guide states that you can use specific granular application control signatures to allow a specific Modbus command and block all others , and it also shows that application control can identify read and write commands separately at message level. Therefore, Modbus write commands are blocked by this profile.
Option B is incorrect because the profile is not simply monitoring all OT protocols; it contains a Block action for Modbus. Option D is incorrect because the study guide links OT protocol visibility specifically to the monitor status , while in the exhibit Modbus_Read.Holding.Registers is set to Allow , not Monitor .
NEW QUESTION # 29
During layer 2 polling , which two pieces of information are gathered by FortiNAC to identify a device?
(Choose two answers)
Answer: A,C
Explanation:
According to the OT Security 7.6 Architect study guide section on Asset Management , specifically regarding FortiNAC Visibility :
* Layer 2 Polling Data : Because each physical address is unique, FortiNAC identifies hosts as they connect to the network. The information gathered during this process fills in the physical address and location information in the database.
* Visibility Components : The guide states that the physical address learned , the time it was learned , and where it was learned from provide the foundation of endpoint visibility in the form of " what, where, and when " information. This confirms that Where it was learned (Option A) and The time it was learned (Option D) are correct.
* Exclusions :
* Layer 3 Polling : The MAC-to-IP correlation (Option B) is explicitly defined as a function of Layer 3 polling , where the correlated IP address is added to the database record for the corresponding MAC address.
* DHCP Fingerprinting : The host name or system name (Option C) and the operating system are gathered via DHCP fingerprinting , not layer 2 polling.
NEW QUESTION # 30
Refer to the exhibit.
The Core Network Security Connectors page of a FortiGate device is shown. You are configuring the Security Fabric in your OT network. One of the devices is not sending logs to FortiAnalyzer. When you check the status of the FortiGate device, it is Disabled as shown in the exhibit. Which two actions must you perform to enable this FortiGate device to send logs to FortiAnalyzer? (Choose two answers)
Answer: A,C
Explanation:
Comprehensive and Detailed Explanation From Exact Extract of OT Security 7.6 Study guides:
The correct answers are A and C .
A is correct because the exhibit explicitly shows Logging & Analytics # FortiAnalyzer: Disabled on this FortiGate. The FortiGate must therefore have its FortiAnalyzer logging destination enabled and configured.
The study guide explains that the FortiAnalyzer Fabric connector consolidates traffic logs and, importantly, that "each FortiGate in the Security Fabric logs traffic to FortiAnalyzer independent of the root or other leaf devices." This means each FortiGate requires its own functioning logging connection to FortiAnalyzer; being a Security Fabric member alone does not cause its logs to pass through the root FortiGate.
C is correct because FortiAnalyzer must accept and authorize the FortiGate as a managed/logging device before the FortiGate can establish the normal logging relationship. This complements the FortiGate-side Logging & Analytics configuration. The study guide ' s Security Fabric logging architecture shows individual FortiGate devices maintaining FortiAnalyzer log connections , with FortiAnalyzer receiving and correlating their traffic and UTM logs. It specifically states that if the root FortiGate is unavailable, logging from leaf FortiGate devices to FortiAnalyzer continues to function , confirming that the FortiGate-to-FortiAnalyzer logging relationship is direct.
B is incorrect because configuring Fabric settings on FortiAnalyzer is not the missing step indicated by the exhibit. The problem shown is that FortiAnalyzer logging is Disabled on the FortiGate .
D is incorrect because authorization on the root FortiGate concerns joining and trusting a FortiGate as a Security Fabric member. It does not authorize that FortiGate as a logging device on FortiAnalyzer. The study guide explicitly distinguishes the architecture by stating that every FortiGate logs to FortiAnalyzer independently of the root .
NEW QUESTION # 31
Refer to the exhibit.
A Logical Topology page of a FortiGate device is shown. Your OT company wants to gain visibility into the network. You decide to implement device detection with the Security Fabric. Based on the exhibit, which statement is correct? (Choose one answer)
Answer: A
Explanation:
The correct answer is A. Device Detection is enabled on the other identified device .
The study guide explains that device identification is a "useful feature for the Security Fabric topology view" and that "FortiGate detects most third-party devices in your network and adds them to the topology view of the Security Fabric." It also states that in the interfaces section, you can enable device detection , and this detection is what allows FortiGate to identify devices based on observed traffic.
In the exhibit, the tooltip distinguishes between "1 device requires authorization" and "1 other identified device." That means the unauthorized device is a separate FortiGate/Fabric member issue, while the other identified device is simply a detected third-party device shown in the topology because device detection is working. Therefore, the correct interpretation is that device detection is enabled for that identified device.
Option B is incorrect because the exhibit does not say the other identified device requires authorization.
Option C is not supported by the study guide, and option D is too specific because no evidence in the exhibit confirms that the detection was enabled specifically on port3 .
NEW QUESTION # 32
......
After using our NSEI_OTS_AR-7.6 study materials, you will feel your changes. These changes will increase your confidence in continuing your studies on NSEI_OTS_AR-7.6 real exam. Believe me, as long as you work hard enough, you can certainly pass the exam in the shortest possible time. The rest of the time, you can use to seize more opportunities. As long as you choose NSEI_OTS_AR-7.6 simulating exam, we will be responsible to you.
NSEI_OTS_AR-7.6 Learning Engine: https://www.pass4suresvce.com/NSEI_OTS_AR-7.6-pass4sure-vce-dumps.html
2026 Latest Pass4suresVCE NSEI_OTS_AR-7.6 PDF Dumps and NSEI_OTS_AR-7.6 Exam Engine Free Share: https://drive.google.com/open?id=1V6702GZ2MPBxInyVQgee1hPwM4AEpY91